My alto low beam not working while high beam working correctly ..where i can check the relays of low beam and how to verify faulty relays ?
30 views not a single reply
check fuse box in engine baythen inside the caror it can be a damaged dipper switch even
I had same issue my mechanic said use bulbs with wattage greater than last ones that seem to solve the issue i think!
I electrician told me that the relay of low beam is not working due to this problem .any one can help me to locate the relay of low beam in car and also how to check relay is working or not ?
I check all the fuse both in engine bay and as well as in under the dash board
Have you solve the problem ??I have the same problem with my altoWhat can I do? ?
Have you solved the problem MustafaIf yesHow ??? I have the same problem
High /low beam switch might be culprit. I had the same problem. switch was blown.
Problem was solved by changing relay and holder of relay, located near battery in bonnet
When i was facing this problem in my alto it was because of touch points of signal stalk switch panel inside steering case,Sometimes point got short and don't work .