Custom Chopper Heavy bike in Pakistan(Made by Monster Bike Karachi)

[tabishfaridi]

We are Making Custom Choppers first time in Pakistan with all Japnese stuff according to your needs

Introduction:

We at Monster Bikes Karachi design custom made Choppers. We specialize in creating something which is unique, attractive, practical and affordable. Once you have seen or ridden one of our customized Choppers, you will certainly appreciate the craftsmanship that goes into making these fine machines. Our dedication to each project, attention to smallest of details and being honest at all times truly differentiate us from others. We are located in Karachi.

Our Work:

Like I have mentioned before, we design customized choppers, there are quite a few factors that we take into consideration for our clients. Each chopper is unique. We put a lot of efforts into the initial stage, so the project starts of smoothly. Then we keep our client posted about the progress made. The client also visits the garage to see the work that's being done. We can also make changes as per client's requirements.

Our Clients:

These Choppers are special. They are hand crafted and their appeal is unmatched by any other kind of bikes. Keeping that in mind, another factor is the cost. These Choppers usually cost in between 6-10 Lakhs each. It all depends upon which components you desire, engine size, length of the Chopper, color / graphic scheme. It all adds up. So this puts it out of range for many people. But these Choppers are not meant for everyone. They are rare gems and their exclusiveness is an attribute related to their visibility on the streets.


For latest Pics and Videos of Monster bike karachi visit Facebook : MONSTER BIKE KARACHI




Our Contacts :
Tabish : 03222748560
Hassib : 03452546056
Umair : 03333921567
Uk Office : 00447924003852

[yaseenrao]

nicessssssssss.....

[r1]

Great work dude..

[dr.omair]

i feel ashamed in critisizing these guys who designed this chopper(CHOOPER), bcoz considering the standard of bikes we have already, i believe they've put in an extra effort. so instead of making fun, im gonna try and put my thoughts about this effort in form of a suggestion/constructive criticism.
1. bike's rear doesnt go with the rest. there is a serious issue with the design...each part should be in harmony with the other. although these parts look fine on their own, they dont look cool together.
2. the seat is too thick. probably u did this considering the bumpy roads we have here, but then again, its not looking like a chopper's seat which usually come with torsion springs
3. always spell check if u r planning to write anything in english on the bike

[loveshakeh]

its good

[7thgear]

I would give a thumb up for these guys. It is easy to criticize but difficult to do anything on your own. Even though the bike may not be any comparison with the choppers we see on TV but its a great effort and with experience comes perfection. To make something extraordinary you need to have state of the art machines for fabrication and all that plus parts like rims, lights and tyres etc. are hard to find inwhich scenario this is the best you can get.
In short, well done guys. Keep it up, hope to see your group making something like the guys at American Chopper, Voodoo Choppers do and earn a name for Pakistan.

[wasifali89]

excellent

[usmannaeem]

Thumbs up for u guys .. superb job well done

[Hamie]

Thats one sweeeett ride! Keep up the good work!

[Hamie]

i feel ashamed in critisizing these guys who designed this chopper(CHOOPER), bcoz considering the standard of bikes we have already, i believe they've put in an extra effort. so instead of making fun, im gonna try and put my thoughts about this effort in form of a suggestion/constructive criticism.
1. bike's rear doesnt go with the rest. there is a serious issue with the design...each part should be in harmony with the other. although these parts look fine on their own, they dont look cool together.
2. the seat is too thick. probably u did this considering the bumpy roads we have here, but then again, its not looking like a chopper's seat which usually come with torsion springs
3. always spell check if u r planning to write anything in english on the bike

Why dont you make one?

[dr.omair]

Why dont you make one?

i knew some1 could come up and say what u just did. its for this very reason that i stated that i wasnt bashing them for coming up with something nonsensical, but giving positive criticism so that they could improve when they start working on their next project(which i hope and pray they do soon). so i guess u definitely misunderstood my intension
with regards to what u asked me to do, yes im designing a chopper. its all set on the drawing board. the only thing i dont have is money coz i havent had a job for the last 1 year now. inshaAllaah when i do get one, the first thing im gonna do is to make my dream chopper a reality

[qaisariqbal791]

Sir i have suzuki 250 running condition can you suggest the cost for modification and time please, present location at Quetta

[Teeboyuk]

Hey.. Re design the back...the rest is coooool...best of luck guys...

[Automotorsport_Lover]

I second dr.omair to some extent...

6-10 lacks in not less money... U can get many sports bike with healthy engines in that range... however thats another issue.

Regarding the bike u hav posted.. To be true..... its really outta proportion big time.
However pls dnt take it negatively... U learn as u work! Good first shot!

For this one I'd say tires are too small... engine is tooooo big? Bdw how many cc is it?
U shud have re-chromed the engine parts or sand blasted... there are a lot of places on the bike which need attention.

The handle bar and petrol tank is stylish... but side covers and then triangular black area below it.... not that good.

Dnt give up yet.. keep improving it! V.nice!

Do post some pics after cleaning teh tires, engine and the radiator properly! they are looking quite dirty atm.

[umerchaudhary]

Nice choppers I didn't get one thing from where do u get these bikes before modifying. And what is engine capacity eg cc and do u do any engine modifications plus do u mold some body parts by your own self.