I have seen people getting their Mehran washed from inside at the service station. The service station guy once inserted the hose in the car and let the water spread with full pressure Barish tou phir rehmat hoti hai. I wonder how do they dry their cars.
Dear All, thanks a lot for valuable suggestions. Yesterday done with general service from a service station & now driving it happily
Thanks again. Have a nice day.
Brother i used those rubbers and what i did was i filled it with silicon . did the same on drivers side and back holes
brother i selaed it with silicon . you can see the pics in above post
In mehran the water usually comes from the firewall,the seal quality is very 2 number thats why the water make its way.,check the holes backside of the glove box ..it got poor insulation
I would suggest, remove your carpet, let is dry, wash it off yourself with detergent and let it dry then place it back and dry the car's floor aswell, rain water is a bit acidic..
Wash the car with high pressure to wash off acidic water. And if you want you can get a little amount of diesel sprayed..
Thankx bro got it General Serviced on last Sunday
https://www.pakwheels.com/forums/members-member-rides/218360-my-fathers-2013-honda-civic-vti-oriel-prosmatec-navigation-28
See post # 544 and Thankx to Almighty ALLAH
Can anybody tell if Cultus carpet be taken out without first taking the seats out?
Yes cut the carpet and its out...
Not required, I'd say take out the seats in a clean environment then take off the carpet.