Hello, my advancer does not have any green light.
first of all this is the layout on the underside of advancer, other then this there are no buttons or switches.
(knob) (led) (led) (led) (led) (push button)
All leds are red. The left most led is always ON on CNG, when i accelerate second LED turns on, if i accelerate more, third turns on and same way 4th.
At the moment the Knob is positioned at its extreme right (clockwise) i, just for experiment, rotated it to the extreme left (anti clockwise) there is virtually no change at idle, the left most led remains ON. But when i accelerate, unlike previously, only second led turned on that too after i increased the throttle significantly. Kindly note i did not feel any physical change in acceleration of the car.
now problem is, how do i tune it? there is no such thing in my advance which u have written (red must turn on and green must turn off when u accelerate)
i dont even know which setting means retarding it and which means advancing it (extreme left when only one more LED glows when accelerating or extreme right when all LEDs one by one glow as i increase accelerator)
p.s may be i am holding the advancer differently that is why to me knob and the idle light is on left instead of right as u stated. I was holding in such a way that components of PCB were facing UP
EDIT: my car is farcing low mileage problem and heavy bogging + no power at low rpms.
(earlier it used to give 14KM in one KG w.o AC, now its hardly 10)