Pajero 1990 restoration

[cutecrimnal143]

Hi guys i just restored my old pajero 1990 after buying it in awful condition. Still lot of work to be done on the jeep. I need to update the interior and get a new engine so please help me with that. At the moment the most of the restoration is complete but few changes will be made this summer fell free to give any suggestions.Thank you

[SALMANWASEEM]

just love ur ride !!
please share some details like from where did u get the parts from and howmuch it will help other members who own a pajero 90 and want to restore it

[SALMANWASEEM]

how much the power windows cost u??

[revengez]

nice project... All the best...

[cutecrimnal143]

just love ur ride !!
please share some details like from where did u get the parts from and howmuch it will help other members who own a pajero 90 and want to restore it

Thank you most parts were bought from shoba Peshawar and few parts were bought from Rawalpindi.Some things such as hid lights and the new projectors and woofer were bought from ebay.

[cutecrimnal143]

how much the power windows cost u??

I bought new doors because the mechanic advised us that if we get power windows on our old doors the fitting wouldn't be as good as it should be so we went with his advise.We bought these new doors for 18000 and i don't remember how much the mechanic charged.The door panels and all switch and motors were included in this price also we gave him our old doors.

[cutecrimnal143]

nice project... All the best...

Thank you brother

[cutecrimnal143]

BMW 06-11 X6 X5 X3 Lichtbalken 4x4 Fahrzeuge Lichter | eBay
where can i get this lights in Pakistan are they available of so what is the price

[Hurrians]

hello brother....its wonderful restoration....Great great Work..i am also planning for Pajero now.......share me ur cost on it....

What about parts must write....

engine + Body + main work done...

Best Regards

Omer

[aqibasit]

nice job buddy

[cutecrimnal143]

hello brother....its wonderful restoration....Great great Work..i am also planning for Pajero now.......share me ur cost on it....

What about parts must write....

engine + Body + main work done...

Best Regards

Omer

Thank you Omer i will post the complete list of items which i changed and the cost later today or tomorrow.

[cutecrimnal143]

nice job buddy

Thank You

[Legalchamp]

awesum restoration BuDDy.... MASHALLAH LOOKinG CooL

[cutecrimnal143]

hello brother....its wonderful restoration....Great great Work..i am also planning for Pajero now.......share me ur cost on it....

What about parts must write....

engine + Body + main work done...

Best Regards

Omer

Door 18000

Seat 14000

Window rear 2500

Bonnet 7000

Foot step 4000

Bumber 4500

Side bumber 2500

Viper 1900 plus wiper motor

4500 labor



17000 denting

Painting cost 21000
total cost for painting was 38000 rupees this included the removal of seats and other accessories and also refitting

Security system 2600

Dash board ac panel 3000

Rubber front screen 3000

samad bond for carpet and panels 1500

Side sticker 2600

Leather (artificial leather for the rear panels plus for the woofer enclosure) 1600


window sealant 400

Electrician 3500

rear door panels 500

Loudspeakers the 3.5 plus 3 pairs of 4 inch speakers cost 2600
6x9 speake

[cutecrimnal143]

hello brother....its wonderful restoration....Great great Work..i am also planning for Pajero now.......share me ur cost on it....

What about parts must write....

engine + Body + main work done...

Best Regards

Omer

I hope you find a good one but if you want to restore the jeep make sure the engine is in good condition and the suspension is fine because these two things will cost you a lot. But if you want to change the engine than a jeep with weak engine is best for you because you can overhaul it or you can replace it.I am planing to change my engine to 3.5 liter petrol or 2.8 liter turbo inter cooler engine the cost of 3.5 liter engine is 150k and i am not sure about the 2.8 and the transmission for 2.8 is same as the stock one except the clutch plate but i am not sure about 3.5 liter. I currently have the 4d56 the 2.4 liter.The parts are very expensive especially the engine components but other than that parts are available at reasonable price from Peshawar and than Lahore and Rawalpindi. i have attached a rough copy of the total cost look at that for reference. PLEASE SHARE YOUR THOUGHT AND EXPERIENCE WHEN YOU BUY YOUR JEEP. THANKS

[laparwah]

I hope you find a good one but if you want to restore the jeep make sure the engine is in good condition and the suspension is fine because these two things will cost you a lot. But if you want to change the engine than a jeep with weak engine is best for you because you can overhaul it or you can replace it.I am planing to change my engine to 3.5 liter petrol or 2.8 liter turbo inter cooler engine the cost of 3.5 liter engine is 150k and i am not sure about the 2.8 and the transmission for 2.8 is same as the stock one except the clutch plate but i am not sure about 3.5 liter. I currently have the 4d56 the 2.4 liter.The parts are very expensive especially the engine components but other than that parts are available at reasonable price from Peshawar and than Lahore and Rawalpindi. i have attached a rough copy of the total cost look at that for reference. PLEASE SHARE YOUR THOUGHT AND EXPERIENCE WHEN YOU BUY YOUR JEEP. THANKS

Cutecriminal Nice job done , i found reference of your thread in pajero fan club , i would recommend you request Moderators to move your thread to 4 * 4 clubs and off Roaders forum , you sure are going to get a lot of response , and there are many guys there who can help u in your restoration.

[laparwah]

i am attaching pic of my Gen 1 pajero , which has a 6g72 3000cc petrol engine in it.
6g72 is a bolt on fit in gen 1 pajero , for 2.8 diesel or 3.5 rae not , u have to cut and weld in that case , not recomended at all

[margallar]

BMW 06-11 X6 X5 X3 Lichtbalken 4x4 Fahrzeuge Lichter | eBay
where can i get this lights in Pakistan are they available of so what is the price

slim chance of finding this one in pakistan.

[cutecrimnal143]

@MOD PLEASE MOVE THIS THREAD 4 * 4 clubs and off Roaders forum THANK YOU

[cutecrimnal143]

Cutecriminal Nice job done , i found reference of your thread in pajero fan club , i would recommend you request Moderators to move your thread to 4 * 4 clubs and off Roaders forum , you sure are going to get a lot of response , and there are many guys there who can help u in your restoration.

THANK YOU just sent a request to the moderators for moving the thread

[cutecrimnal143]

i am attaching pic of my Gen 1 pajero , which has a 6g72 3000cc petrol engine in it.
6g72 is a bolt on fit in gen 1 pajero , for 2.8 diesel or 3.5 rae not , u have to cut and weld in that case , not recomended at all

are you using the stock transmission and what was the cost of the swap and how many kms per liter you get can you please answer these questions. I am sure that 2.8 is a direct fit because a friend of mine did that to his gen 1 pajero but he had to make few adjustments for the inter cooler. But i dont want anything welded on my chassis if 3.5 is a direct fit i will go for that if not than i will end up getting 3.0 or 2.8 diesel. Can you compare the difference of millage and power between your old and new engine.What other components were changed such as differentials and other stuff? thanks