@junaidakhtar01
Wat material's liner u choose ? a per my experience after market liner donot perform well specially in summers & causes hot statrting problems.
after market liner are in the market just bcoz we have to change our original liner due to some failures our cb650 liner material is the fine cast iron perfectly installed by the one, dealing only in engine linersliner material is the issue but not the most sophisticated issuewhat we have to consider the most is the oil clearance of the rings and the oil lining for the liner as well as oil pump pressure finest liner or the Original liners couldn't support due to these little blockage instead of clearance please visit http://www.costex.com/Library/articles/IT03.pdf
@Junaidakhtar01
Thanks for the informative reply.Our dilemma while perfoming such Jobs is the expertiese/vision of the machinest as well as the acuuracy of machines being used. Usualy machinest (kharadia) uses cheap grade machines in their workshops & minute errors always exists thier. But i m sure u must have choosen a real expert for this job & wish you best of luck wid your project (Y).
some more pic of engine assembling
Gr8 job looks fit
awesome project
waiting for updates
Bingo
Awesome work, Bhai can u tell me abt paint job? which paint is it? the black one? i mean u said something aabt powder coated, wht's the benefit and durability?
Really nice and ow some work.. hats of to you for this marvelous project
Hi tabish umeed hai tum kheriyat se hoge yar normal spray paint agr bhatti mein pakta hai to temperature 70-90 degree Centigrade hota hai Powder Coating 150 degree Centigrade pe hoti hai aur us se pehle powder coat karte wqtpowder aur metal dono ko -ve +ve charge kar ke coat kiya jata haithats why powder coating is more griper than spray paint and durable as well
yar plz give two line space between every pic they are very cluttered one needs first to distinguish between [pics,, you are doing an excellant job,, keep it up man,,
good to see the beauty setting up again to hit the road
sir aainda aapke jazbaat ka khas khayal rakha jayega
dear ma tho kahtha hou ka app latest updated picsma kuch space da dain realy nice updates ... i have to say this is a p0rn for us,,,just takes a couple of minutes,, btw what camera is used very nice camera work aswell,,
Thanks for AppreciationCamera is Canon 350D SLR
Masha Allah Excellent work going on (Y) (Y) (Y)
salaamgreat project.aaaammmm...i had a question....i had heard alot about black powder coating especially on TV where they show the ANGRAIZ powder coating their bobber engines and mufflers black n was wondering how much it costs on an average 400 cc engine..thanx and regards:)
how much the asleeve cost and what are its dimentions ,, thickness of wall,,also dear is there any difference between a liner and a sleeve? i guess japs call it sleeve
bhai jan kiya hua updates nahi i koi baray dino say sab kheryat tau hai naa???
Awesome
That goes flying above my head.... far better than my imaginations. Good to see a complete DIY.