My bike has a front disc setup, facing issue of wheel jamming.
In details, the brake caliper is jamming disc at a specific point only, like the wheel is rotating freely and stuck at one point. I have tried another disc and this second disc is also jamming at the same point, strange? I mean I noticed it by observing tube-nosel position.
For both disc when tube-nosel reach this point (see image below), wheel is jamming. Wheel jamming gets even worst in longer run may be pads get heated. Before replacing the disc, we did the bleeding to remove any air. In all the process, the brakes is working fine like it stops the bike, grips is ok but that wheel jamming at one point I am not able to figure out, may be drum is out at one point.