Few days ago after being serviced i felt that sound of my car (from Exhaust) has been changed. sound is same as cars having sport exhaust dholki (Boom Boom).today i went down to check and i found these tiny holes on the mini dholki( don't know what is real name of this thing)
but when take a look toward engine side i found this mess. is se pehlay driving k doran jab break lagata tha to thak ki awaz bhi ati thi lekan trace nahi ho raha tha k kahan se ati hai. kia is ki awaz thi?
and this too. once mechanic told me k "shifter ki seal phatt gayee hai 3k loon ga gear utarna peray ga". i asked another mechanic and he says "1500 dena aisay he seal change kerdon ga".
Q. now i need to know that how to get rid of this all do i have to take action very quickly ya phir koi bara masla nahi aram se kerwa lon. kindly guide me briefly actually this is my first car. before this i had no experience to deal with this kind of problems.
fady04
gentleman this pics shows the main foundation on which engine rests (called as gadri) this is a serious thing take care of it asap. New one (local) costs around 300 - 400 rs but it will be better if you get a second hand in good condition from old spare parts market, wont cost more than 500 rs. take it to a mechanic to change it. Dont get cheated by anyone who says that he will have to remove engine for it. It can be changed easily with out taking out engine, car needs to be parked on a pit and car be done in half hour. But i am not sure about gear lever seals.
difference between a local new one and old genuine is that local is not of a very good quality and its holes also may not fit in the genuine bolts (mechanic may have to alter the positions) with a Genuine (kabli) you can get a good quality and bolt to bolt fitting. Dont forget its Rubber Washers dont remember what these are called.
@adil_dar: thanks a lot. abhi ja ker try kerta hon. Rubber washer new he le lon? Kabli k sath pata nahi kis condition mein hon. or han how much mechanic charges?
or woh exhaust ka kia keron log ghoor ghoor ker dekhtay hain k molvi sports sound laga ker gari chala raha hai. simple gas wield kerwa lon koi masla to nahi?
Retire the car please. and dispose of it properly. Destroy it completely before selling it for scrap.
this pipe can be welded. no problem in that. i have done it once on my cuore. also replacement of seal is not a big matter. and your car is seriously damaged from under. post photos of all of the car. if rest of body is fine get body work done on engine compartment and foundations. do it asap before it breaks while driving. this car is scrap. please don't mind. body work is must if you want to use it.
Welding will work but if the metal is rotten and soft, holes will come again from different place overtime, in that case it will be better to replace the resonator.Once my car's exhaust piping broke in the middle of motorway and we had to travel with the pipe dragging on road and car sounding like a helicopter.
Ask for the kabli rubber washers also if you get these it will be better than new one. Mechanic can be a better judge of the condition that will come off from your car and the ones he will be replacing. I dont know what you get but if i got seal and this piece replaced from my mechanic he would charge me about a thousand.
I got new good quality silencer muffler (one on the end, which is bigger than this center piece) in 1300 Rs (without installation) a little lower quality was available in 800 Rs, i guess you can get this piece in 500 rs and installation will be in 200 - 300 Rs.
And for all those who call this car a scrap can check out the thread another khyber being re done in DIY section . This is thousand times better than that one. You people can check first three pics where floor panels are visible and are intact.
this gear leak isnt from lever its from axel seals it looks like from lever but its from axels
if the axel seals are brokem then it requires only half a hour to be fixed the mechanic will pull the axels out, put the seals in and u r done!
thank you all for guiding me so briefly. @ adil_dar: yesterday i went to old parts market "Mola Ali k Qadam" i found many Guardris some of them were genuine but lost there hardness. some i found good in condition they were not genuine. i bought one and which was good in condition and called by kabari as kabuli. but when my mechanic saw that he says yeh to lahori hai. means that was local made. and a denter also confirmed that. so there i had no choice to bought this One it is also Local Made but best Quality available in market. here in Hyderabad is a Suzuki Authorized Workshop named Zeeshan Autos where parts manager is my friend he refered me to go to shop from where i bought this one shop keeper advised me to wield the edges before installing into my car. yesterday we were out of light so today we are going to fix this.
I salute you and understand how you have completed your Khyber's restoration project. after searching and purchasing a singly guardri.
all those are saying that my car is scrap as @adil_dar said my car is not scrap :P, (thank you man)
actually here in hyderabad if you take a look p under a car just one year old you will find same situation b'coz of Dirt and water on roads 360 days a year. i accept that my car is started rusting but floor is ok except 2 0r 3 inch piece and frame is also not rusted yet. well i have planned to do some body work but not yet.
i had shown this to few mechanics and they confirmed that this is gear shifter seal leak. and to replace this Gear utarna peray ga. in other suzuki cars this seal could be easily change but in khyber as per mechanics gear box has to lift down. seal to bas 250 ki hai lekin labour charges buhat lag rahy hain. well kerta hon kuch
I had mehran with similar leak Gear bix utra and khulla thr effed up by mech i had to sell the car theb becaude of gear noise mine leak looked similr to urs and hsr mevh ba paisy banay k lye yahi kaha still leak Bhai its axel seal try replace it first and clean underside with oetrol and cloth
Sent from my GT-I9300 using Tapatalk
ok try ker k dekhta hon
it is not scrap, just needs some love, it will be good as new
bro good going and keep us updated
at last job has been completed. i returned New Local One and got repaired the old one. bcoz when i compare both new one fresh and old rusted one i found the rusted one having more strength than the new one. so i went to a wielder and ask him to fix old guardri and he did that in just 300.Rs. and after that i threw that repaired to check and that is too strong until now. so i just install this old one and returned the new one made up of tin sheet. ( sorry i forgot to take pictures during repairing).
bro me also taking this as funny bcoz i know what i have. Scrap of 3,20,000 (H)
well any ways i want to thank you all for helping me to get out of this. ALLAH bless you all