Assalam o Alaikum dear all
Couple of days before i tried to upgrade the headlight system of my carI us to drive for long routes and visibilty for a long distance is very important for night time driving. And it should also be safe for others.Now a days normally HID system is very cheap and our friends they install HID even in 70cc bike without even knowing that it will be harmful for upcoming traffic. Using halogen reflector for HID system is definitely very dangerous. They spread the light beams to different angles and effect the visibility of upcoming trafic.Even the person driving infront of you he will be disturbing due to un even light throw of HID with halogen reflector.My friend also suggest me to use this kind of HID in my car . Because it is cheap and easily available.But with the help of my friend Ibad @keiworks12I was able to find whatever i was looking forDetails of my projectMorimoto D2S mini 3.0 Bixenon projectorsDenso ballat 35w OEMComplete H4 harnessXb35 4300k D2S bulbsOriginal Shrouds
First i bought New headlights for my car as the old one were very faded yellow.Then the next step was very killing... just to do experiment with brand new headlights[emoji23] [emoji23]
This light have h4 type low beam bulbs so it was very easy for me to install mini D2S 3.0 projector in it. They are just like plug and playHeating the headlight and removing the front glas was a difficult task for the first timeHeat it for like 12 minutes with hair dryer. Box is original box of headlight.This is the open front of headlight and i installed projector in itShrouds were a little bit big for the headlight so i cut them from the top to get them fir in houseThat's a little bit retro fitting [emoji14] [emoji14] And then i fixed the with elfy but if you use magic depoxy it will be better.This is how it fit from the back side and H4 type bulb have proper housing for D2S projectors and don't forget to remove that cap of halogen bulb.
Now this is wire of solenoid of low beam high beamSolenoid wire connected with harnessNext step is to check the function of low beam high beam and bulbs direct on carAnd you can also see the yellow headlights i was using at the moment [emoji12] [emoji12] [emoji12] [emoji13] Bulb was working fie and solenoid of low and high beams was also goodNow time to fix the glass back. Fixed the glass and heated it for like 10 minutes and tied with flexible socks[emoji5] [emoji23] [emoji23] so that the silicone can filimed equally and no air gaps left in headlightTo make the light Airtight i managed to cut a slot according to the size of wires onlyNow i left them for 2 3 hours so the silicon can dry properly and then i fixed them in carBoth looks of headlightOne red wire of harness is directly attached with positive terminal of battery of carThe other black is attached with negative terminalFinal view of headlights after installing themIgnore the faded bumper and Number plate[emoji39] [emoji39] And then i was waiting for nightfall [emoji13] And then check the result of low beam
High Beam of car and visibilty is superb but it will also damage the visibility of upcoming traffic
Cutoff of headlights and these are safe for next personOnly bumper area is covered with the light beamLotsss and lots of bumpers[emoji7]
In the End ALHAMDULILLAH with the help of ALLAH this project was completed in 6 to 7 hours of continuous workAnd special thanks to @keiworks12 for his support and guidance online Via whatsapp and call [emoji8]
Feel the difference MASHAALLAH
Sent from my SM-G935F using PW Forums mobile app
MASHA ALLAH looks amazing and just like OEM in your chevy. I am glad i helped you out
Sent from my SM-J700H using PW Forums mobile app
Great work MashAllah @keiworks12 you're the best as always, and by far the best person in Pakistan to buy HID projectors.Let there be light
Thanks alot for your love and support
@rizwan4340
Good retrofit.......Can you share the prices of these things individually? And also the name of the shroud?
Morimoto D2S mini 3.0 Bixenon projectorsDenso ballat 35w OEMComplete H4 harnessXb35 4300k D2S bulbsOriginal Shrouds
Dear you can contact @keiworks12 for ll your details.Sorry for late response
Nice retrofitting. Just get that bumper fixed.
Great work but you seems not be in PakistanHow can we get all that stuff here in Pakistan
which bulb is installed on high beams?
Dear Friends,
I have set of Morimoto Mini which i brought from PRC.Anybody interested pls pm me.
Price please?