Civic's knee - experts help.

bango · 07-11-2009, 05:01 PM

Dear Civic experts.

Is the inner axle of Civic CF model repairable? If yes, then can anyone name a really nice kharadiya in Lahore?

If not, then kindly suggest, how much would the inner axle of Honda Civic would cost?

I'm attaching the pic for your reference, its the one marked in the red rectangle.

panicslayer · 07-11-2009, 06:09 PM

Tell me about the problem ur facing..... then ill tell u whether it's repairable or not.

1. Car shudders during acceleration?
2. Bone cracking sound while turning?

Plus kharadia would charge Rs. 600 for the repair. Replacement with qabli would cost u Rs. 3500/- for the pair. Rs. 3000/- and Rs. 500/- labor charges. But 1st tell me whats the problem? 1 or 2

honrolla · 07-11-2009, 06:30 PM

i remember replacing this , 14k for a new one only the peice that goes in your gearbox ... from plaza...

bango · 07-11-2009, 06:46 PM

WOW panic - you're bang on!

Its the first problem - I face it when I try accelerating, and it goes away when the speed touches 50kmph.
It comes again when the car reaches 170kmph, but I'm not really bothered because that's an uncommonly faced situation.

Your suggestions please.

panicslayer · 07-11-2009, 07:36 PM

A fellow member has told u the price for new one that is 14k and i told u the price of qabli one that 3k, decision is urs what to do. Actually what happens over the time (mostly due to bumpy driving), these round boxes type things develop hairline scratches inside which result this shudder while accelerating

Now in case of new one, u can buy urself but in case of qabli one, u WILL HAVE to bring ur mechanic along with u who will thoroughly check the condition from outside and by feeling any stains inside through his fingers.

I replaced these a couple of months back and the same problem vanished. Although as u said this is not bothering that much but sometimes it become an embarrassing situation for u while somebody is sitting with u in the car

hash4u · 07-11-2009, 07:39 PM

LoL @ knee problem

go 4 kabli. dont repair

bango · 07-11-2009, 07:48 PM

Thanks Panic.

So changing them is the only solution - no repair, right?

Yeah, it does bother me to tell you the truth, it kills the drive pleasure.

One last question - generally, a fault in one purza if not fixed in time, goes on destroying another purza. Is it the same case with the axle? I mean if I don't get it fixed rightaway, will it go on to break something else?

panicslayer · 07-11-2009, 08:15 PM

Replacement is the only solution

I kept driving like that for about 2 months cuz was short of finances and had many other things to at home instead of this. My mechanic already told me that it doesn't hurt if u keep driving like that. But offcourse, never elongate a problem unnecessarily

I would like to add another thing. This shudder problem is repairable only if its due to slightly bent axel rod (mild chances). But after opening it, ur mechanic would tell you where the real problem lies, axel rod or that box whatever. Do feel hairline scratches and stains urself when u open that, just for the experience

SER_GTR · 07-11-2009, 08:18 PM

I Better Suggest Putting Brand New And If Not Then Atleast Get Kabli Ones...!!

These Things Can't Be Compromised And Its MOst Important Part Of Car And Engine And Damaging It Can Cause Serious Issues Any Time...!!

panicslayer · 07-11-2009, 08:27 PM

Agreed with @SER_GTR

Getafix · 08-11-2009, 02:19 AM

panicslayer,
this is a bit off-topic but which workshop do you get suspension work done from in peshawar? I also need to get some work done in my civic.

panicslayer · 08-11-2009, 02:49 AM

@Getafix

from Mukaram Ustaad. There's a street goes inside right beside WHEELS on tamboawaan. End of the street and ull enter in a workshop where u will find him.

umair86pk · 09-11-2009, 06:46 AM

get kabuli ones im using one for over 1.5 yr working gr8 in my civic

toofast · 09-11-2009, 07:14 AM

Don't reapir buy new/rebuilt

wahdatautos · 09-11-2009, 10:13 AM

I m running my own auto workshop with the renowned name of " Wahdat Auto Workshop" at main wahdat road Lhr . if u want to know any thing i m available at any time . my cell no is 0321 - 4430780 . I will be waiting 4 yr call .

suzukialtomehran · 09-11-2009, 11:05 AM

100% Agree with SER_GTR

Buy New ones. Repairing of these thing is not reliable.

bango · 15-11-2009, 03:51 PM

@Panic - need your help again.

I changed the right inner axle, and the problem vanished...upto 99 percent. I still feel a light vibration which none 0f my friend feels, so I guess it may just be voices in my head.

Anyway, here's the new issue.

The left axle rod (the longer one) in CF - does it come in one standard size? Or are there any with a slight difference in length? Because I hear a light thud (tuk) at times when I slightly turn my steering back. And when recently I went for car wash, and the car was lifted, I felt as if the left inner axle is running not as much inside the gearbox as the right one is...i.e. it is a little short of the required length. Is it possible?

07-11-2009, 05:01 PM	#1
bango 446 days old at PW Location: Lahore Posts: 4,982	Civic's knee - experts help. Dear Civic experts. Is the inner axle of Civic CF model repairable? If yes, then can anyone name a really nice kharadiya in Lahore? If not, then kindly suggest, how much would the inner axle of Honda Civic would cost? I'm attaching the pic for your reference, its the one marked in the red rectangle. __________________ There's a time when a man needs to fight, and a time when he needs to accept that his destiny is lost... the ship has sailed and only a fool would continue. Truth is... I've always been a fool.

07-11-2009, 06:09 PM	#2
panicslayer 674 days old at PW Location: Islamabad Age: 28 Posts: 9,187	Tell me about the problem ur facing..... then ill tell u whether it's repairable or not. 1. Car shudders during acceleration? 2. Bone cracking sound while turning? Plus kharadia would charge Rs. 600 for the repair. Replacement with qabli would cost u Rs. 3500/- for the pair. Rs. 3000/- and Rs. 500/- labor charges. But 1st tell me whats the problem? 1 or 2 __________________ Title: Tyre Subject: Section: Feedback & suggestions. My car's tyre got flat and its "Chilling HOT" out there. Where are the MODS? Are they sleeping?

07-11-2009, 06:46 PM	#4
bango 446 days old at PW Location: Lahore Posts: 4,982	WOW panic - you're bang on! Its the first problem - I face it when I try accelerating, and it goes away when the speed touches 50kmph. It comes again when the car reaches 170kmph, but I'm not really bothered because that's an uncommonly faced situation. Your suggestions please. __________________ There's a time when a man needs to fight, and a time when he needs to accept that his destiny is lost... the ship has sailed and only a fool would continue. Truth is... I've always been a fool.

07-11-2009, 07:36 PM	#5
panicslayer 674 days old at PW Location: Islamabad Age: 28 Posts: 9,187	A fellow member has told u the price for new one that is 14k and i told u the price of qabli one that 3k, decision is urs what to do. Actually what happens over the time (mostly due to bumpy driving), these round boxes type things develop hairline scratches inside which result this shudder while accelerating Now in case of new one, u can buy urself but in case of qabli one, u WILL HAVE to bring ur mechanic along with u who will thoroughly check the condition from outside and by feeling any stains inside through his fingers. I replaced these a couple of months back and the same problem vanished. Although as u said this is not bothering that much but sometimes it become an embarrassing situation for u while somebody is sitting with u in the car __________________ Title: Tyre Subject: Section: Feedback & suggestions. My car's tyre got flat and its "Chilling HOT" out there. Where are the MODS? Are they sleeping?

07-11-2009, 07:39 PM	#6
hash4u 1,929 days old at PW Location: Islamabad Age: 31 Posts: 13,943	LoL @ knee problem go 4 kabli. dont repair __________________ Life is short and very unpredictable just like a Quarter mile .....

Cars by Make

Cars by Location

Go to...

PakWheels.com

07-11-2009, 06:30 PM	#3
honrolla 945 days old at PW Location: Karachi Age: 31 Posts: 289	i remember replacing this , 14k for a new one only the peice that goes in your gearbox ... from plaza...

07-11-2009, 07:48 PM	#7
bango 446 days old at PW Location: Lahore Posts: 4,982	Thanks Panic. So changing them is the only solution - no repair, right? Yeah, it does bother me to tell you the truth, it kills the drive pleasure. One last question - generally, a fault in one purza if not fixed in time, goes on destroying another purza. Is it the same case with the axle? I mean if I don't get it fixed rightaway, will it go on to break something else? __________________ There's a time when a man needs to fight, and a time when he needs to accept that his destiny is lost... the ship has sailed and only a fool would continue. Truth is... I've always been a fool.

07-11-2009, 08:15 PM	#8
panicslayer 674 days old at PW Location: Islamabad Age: 28 Posts: 9,187	Replacement is the only solution I kept driving like that for about 2 months cuz was short of finances and had many other things to at home instead of this. My mechanic already told me that it doesn't hurt if u keep driving like that. But offcourse, never elongate a problem unnecessarily I would like to add another thing. This shudder problem is repairable only if its due to slightly bent axel rod (mild chances). But after opening it, ur mechanic would tell you where the real problem lies, axel rod or that box whatever. Do feel hairline scratches and stains urself when u open that, just for the experience __________________ Title: Tyre Subject: Section: Feedback & suggestions. My car's tyre got flat and its "Chilling HOT" out there. Where are the MODS? Are they sleeping?

07-11-2009, 08:18 PM	#9
SER_GTR 1,760 days old at PW Location: Karachi Age: 24 Posts: 5,315	I Better Suggest Putting Brand New And If Not Then Atleast Get Kabli Ones...!! These Things Can't Be Compromised And Its MOst Important Part Of Car And Engine And Damaging It Can Cause Serious Issues Any Time...!! __________________ TOYOTA Sprinter 86- AE80 DOHC 20v'D TOYOTA Corolla 98- AE101 4AFE 16v

07-11-2009, 08:27 PM	#10
panicslayer 674 days old at PW Location: Islamabad Age: 28 Posts: 9,187	Agreed with @SER_GTR __________________ Title: Tyre Subject: Section: Feedback & suggestions. My car's tyre got flat and its "Chilling HOT" out there. Where are the MODS? Are they sleeping?

08-11-2009, 02:19 AM	#11
Getafix 845 days old at PW Location: Islamabad Age: 30 Posts: 469	panicslayer, this is a bit off-topic but which workshop do you get suspension work done from in peshawar? I also need to get some work done in my civic.

08-11-2009, 02:49 AM	#12
panicslayer 674 days old at PW Location: Islamabad Age: 28 Posts: 9,187	@Getafix from Mukaram Ustaad. There's a street goes inside right beside WHEELS on tamboawaan. End of the street and ull enter in a workshop where u will find him. __________________ Title: Tyre Subject: Section: Feedback & suggestions. My car's tyre got flat and its "Chilling HOT" out there. Where are the MODS? Are they sleeping?

09-11-2009, 06:46 AM	#13
umair86pk 1,193 days old at PW Location: Lahore Age: 24 Posts: 224	get kabuli ones im using one for over 1.5 yr working gr8 in my civic __________________ -

09-11-2009, 07:14 AM	#14
toofast 2,187 days old at PW Location: Oklahoma Age: 34 Posts: 17,576	Don't reapir buy new/rebuilt __________________ V-Tech just kicked-in YO!

09-11-2009, 10:13 AM	#15
wahdatautos 327 days old at PW Location: Lahore Age: 24 Posts: 19	I m running my own auto workshop with the renowned name of " Wahdat Auto Workshop" at main wahdat road Lhr . if u want to know any thing i m available at any time . my cell no is 0321 - 4430780 . I will be waiting 4 yr call .

09-11-2009, 11:05 AM	#16
suzukialtomehran 1,951 days old at PW Location: Sargodha Age: 20 Posts: 5,618	100% Agree with SER_GTR Buy New ones. Repairing of these thing is not reliable. __________________ Got New Wheels about 12 years Ago and still shines like dull rubber, Cowrolla Sucks big time(-) Paindoo's Favorite Engine is Toyota 2c Diesel (-) I want to Go 0-60 in less than .01 Sec and than 60-0 in 0.001 Secs (-) I Wash My Car After Every blink of an Eye (-) (-)LOL Word Has 2 Meanings(-)Life is Joke, I have Sold My Mehran, My Cars Meter Starts From 220Kmh (-)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

15-11-2009, 03:51 PM	#17
bango 446 days old at PW Location: Lahore Posts: 4,982	@Panic - need your help again. I changed the right inner axle, and the problem vanished...upto 99 percent. I still feel a light vibration which none 0f my friend feels, so I guess it may just be voices in my head. Anyway, here's the new issue. The left axle rod (the longer one) in CF - does it come in one standard size? Or are there any with a slight difference in length? Because I hear a light thud (tuk) at times when I slightly turn my steering back. And when recently I went for car wash, and the car was lifted, I felt as if the left inner axle is running not as much inside the gearbox as the right one is...i.e. it is a little short of the required length. Is it possible? __________________ There's a time when a man needs to fight, and a time when he needs to accept that his destiny is lost... the ship has sailed and only a fool would continue. Truth is... I've always been a fool.