Survey by Qualaroo
+ Reply to Thread
Results 1 to 8 of 8
Like Tree1Likes
  • 1 Post By haseeb_mazhar

Thread: Basic Accord CL9 Modifications

  1. #1
    PakWheeler Follow
    haseeb_mazhar's Avatar
    Join Date
    Dec 2006
    Location
    Islamabad
    Age
    34
    Posts
    41
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default Basic Accord CL9 Modifications

    Hello Friends,

    Just wanted to share with you the basic modifications i did to my CL9.

    Installed a 22mm Rear Sway bar which replaced the stock 11mm sway bar. Noticed a change in handling on corners and now can turn corners at more speed compared to the stock.

    Second mod. i did was to install Hondata Intake Manifold Gasket. Still need to do more trial to see whether the below claim is true or not !!

    "Hondata have developed a special high temperature insulating gasket which replaces the stock intake gasket. This and bypassing several heat sources significantly reduces the transfer of heat from the head to the intake and incoming air giving you up to 3 to 5% more power."

    "For every 3.3 °C (5° F) rise in intake temperature, air density drops 1%. The hotter the air, the less fuel the computer injects to compensate for reduced oxygen"

    Stock Parts
    Basic Accord CL9 Modifications -312066

    Hondata Gasket
    Basic Accord CL9 Modifications -312067

    22mm Sway Bar
    Basic Accord CL9 Modifications -312068


  2. #2
    Senior PakWheeler Follow
    drtanveerali's Avatar
    Join Date
    Apr 2009
    Location
    Select City
    Age
    40
    Posts
    1,304
    Follows
    0
    Following
    0
    Mentioned
    7 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    1

    Default

    good innovation, keep it up.
    www.dr-tanveer.com

  3. #3
    jz
    jz is offline
    Senior PakWheeler Follow
    jz's Avatar
    Join Date
    Dec 2004
    Location
    Lahore
    Age
    2
    Posts
    26,106
    Follows
    5
    Following
    0
    Mentioned
    185 Post(s)
    Tagged
    12 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    good mods
    www.facebook.com/performancepartslahore

  4. #4
    Senior PakWheeler Follow
    wasay_ahmed's Avatar
    Join Date
    Nov 2006
    Location
    Lahore
    Age
    29
    Posts
    4,959
    Follows
    3
    Following
    0
    Mentioned
    12 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    nice n unique mods.wht else are u running
    DIY The Best Workshop on the Holy Planet!
    Every thing changes,Its only the "change" which never changes.

  5. #5
    Senior PakWheeler Follow
    UJ_36's Avatar
    Join Date
    Dec 2009
    Location
    Sialkot
    Age
    26
    Posts
    3,211
    Follows
    1
    Following
    0
    Mentioned
    8 Post(s)
    Tagged
    2 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    good mods
    Sir,I am using NiKon D3100 wd 18-55mm VR kit lens and........... powered by 2NZ

  6. #6
    Senior PakWheeler Follow
    Xulfiqar's Avatar
    Join Date
    Aug 2003
    Location
    Other
    Age
    38
    Posts
    24,399
    Follows
    131
    Following
    0
    Mentioned
    3987 Post(s)
    Tagged
    94 Thread(s)
    Problems Posted
    0
    Problems Solved
    4
    Best Answers
    0
    Good Answers
    6

    Default

    Issues noted with such gaskets are warpage due to irregular heating, gaskets like these are good where assemblies are not bolted through but have some sort of external fasteners compressing it, the studs sticking through the manifold will transfer heat and the insulation of this "performance" gasket will prevent the heat to be transferred from the head to manifold which will cause hot spots that lead to warping.

    Makes you wonder why Honda decided to use a metallic sandwich for this application and even the cylinder head to block.
    ZRS - Zulfiqar Racing Systems ..... - professionals at work - at crackwheels.com

  7. #7
    PakWheeler Follow
    haseeb_mazhar's Avatar
    Join Date
    Dec 2006
    Location
    Islamabad
    Age
    34
    Posts
    41
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    So i decided to take friday off and head to lahore on motorway. The progressive sway bar performed awsome in the salt range section of kalar kahar. Amazing improvement of handling on the sharp bends and curves. A must have mod.

    The intake manifold could not be touched by hand as it would get really hot but after installation of the gasket i can touch it even after 4hrs of driving. It means that the gasket is doing what its suppose to do.

  8. #8
    PakWheeler Follow
    haseeb_mazhar's Avatar
    Join Date
    Dec 2006
    Location
    Islamabad
    Age
    34
    Posts
    41
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by wasay_ahmed View Post
    nice n unique mods.wht else are u running
    Nothing special just some basic stuff, AEM SRI, DC headers,180km/hr speed delimiter.

+ Reply to Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •