After reading and researching many threads and also recommendations by Zulfiqar Bhai. I did a flush to my ALTO radiator.
My Radiator and gas kit were recently replaced 1 month back And i was facing no heat up issues. but deposits of rust were increasing in radiator due water and old rust in reservoir and pipes. This was not acceptable to me as sooner or later it will ruin everything.
So First step was to remove the thermostat valve by removing its flange. The Valve was quite neat and clean as it was recently bought. Then I bought a new flange for Rs 350. Installed the old fan switch in it, applied some silicon (Rs 60) and installed the flange back.
I took a 2.25 liter bottle, added water. Bought TATRI (Citric Acid) and made a solution. First I drained all the water in radiator. then inserted the Tatri solution in radiator and topped it up with tap water
- Used Cars
- New Cars
- Cool Rides
- Post an Ad