2nzfe, 1nzfe, d15, 4efe, which engine will be easily fit in charade 86 , and give good performance on cng to!
see the following link....
https://www.pakwheels.com/forums/performance-modification-tune-up-preventive-maintenance/156364-charade-engine-swap-need-suggestions-guidance
if its a g-11 stick with stock and you would need to cut the chassis
yes its with stock g11
better stick in a cb70 or a cb80
but its old carby engine, wont give good performance, even put intake or plugs or free flow piping exhaust system....
bro cb 70 or 80 are found in gtti 3 cylinder efi turbo charge if you can spend some money oh those 2 engines you would smoke the big boys pretty quick
they are the toughest engine i have seen
But these engines not work with CNG i think, i m not into racing stuff, just want little power any idea how much cost for cb 80 or 70 engines?
PLEASE GET YOUR PRIORITIES STRAIGHT.
you want to change to a larger engine and run it on CNG.. thats like saying I want to buy a horse to replace my goat as a pet but I can only feed it whatever I used to feed the little goat
Xulfiqar Bhai aap to seeday kaan say pakertay hain.
no need for explaining xulfi bahi rules
@last_look,I don't think i explained anyone rules here.
So anybody knows the price of 4efe n d15b engine?
lol
4efe for 55-60K and d15b 60-65K(prices of lahore market)both swaps will cost you about 115K-125k(prices of lahore market)and both requires cutting of chassis about 2inches from both sides...my litle advice dont go for a bigger engine just find a gud quality kabli engine from market and live with it...
what about your charade engine swaping? which one you choose? kabli engine means? stock engine ???
my swap is almost done just fuel pump and starter motor were not working properly so had to change them...kabli engine means the engine which is not used locally....any are imported engines as in my case its a malysian engine it reached turkham boder then to peshawar and then here in lahore....i was damn intrested in d15b swap but when he tell me some cutting of chassis is needed i changed my intrest ..
which one you installed? and i talked to racer edge mechanic he saying no cutting chassis on d15 and other mechanic black auto lahore... same not cutting, but ON A/T need to cut chassis.karachi mechanic saying its hard to find computer for d15
installed its original cb33...i met the most popular mechanic of lahore who swaps engines in charade even HE tolded me some cutting work will b needed...when you will visit your mechanic again to finalize the deal then he will tell you about the cutting part at the end...