Survey by Qualaroo
Closed Thread
Page 1 of 2 12 LastLast
Results 1 to 20 of 27
Like Tree3Likes

Thread: honda city 2000 engine technical info required

  1. #1
    Senior PakWheeler Follow
    mahmood's Avatar
    Join Date
    Mar 2004
    Location
    Islamabad
    Age
    34
    Posts
    1,998
    Follows
    1
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default honda city 2000 engine technical info required

    i want some help from experts regarding honda city 2000-2003 engine, stock engine is D13B4, i wanna know
    1. Is stock engine came with PCV valve? if yes plz indicate location
    2. Does stock engine have IAC valve? if yes please indicate location
    3. what is funtion of follwing circled sensor, and just behind that sensor there is i beleive another sensor which if fed by red wire i have mentioned with arrow head what is it?
    honda city 2000 engine technical info required - 13601 honda city fan club engine

    i also happen to have owner manual for same mentioned models, if anybody requires any info from it, i will be pleased to help


  2. #2
    Senior PakWheeler Follow
    mahmood's Avatar
    Join Date
    Mar 2004
    Location
    Islamabad
    Age
    34
    Posts
    1,998
    Follows
    1
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    come on dudes over 20 visits and not a single reply, kia ho gaya hai yaar kissi k pass koi tu info ho gi?????

  3. #3
    Senior PakWheeler Follow
    hondaFanatic's Avatar
    Join Date
    Jul 2009
    Location
    Lahore
    Age
    26
    Posts
    2,041
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    i blv thats the oil pressure sensor...... im not too sure, but i think thats it. i own the same car, will let u know in a bit
    Powered by Honda..R18 Boys

  4. #4
    Senior PakWheeler Follow
    Xulfiqar's Avatar
    Join Date
    Aug 2003
    Location
    Other
    Age
    38
    Posts
    24,400
    Follows
    131
    Following
    0
    Mentioned
    3988 Post(s)
    Tagged
    94 Thread(s)
    Problems Posted
    0
    Problems Solved
    4
    Best Answers
    0
    Good Answers
    6

    Default

    the two pin plug underneath the distributor is the coolant temperature sensor, the one pin plug beside it is the temp needle thermistor, the PCV can be located on a separate chamber bolted to the block of the engine above the oil filter or on the inlet manifold itself, I have seen both variants, and the IAC is located on the throttle body, its a yellowish green DENSO part with a three pin plug connected to it.

    What else you want to know?

  5. #5
    Senior PakWheeler Follow
    mahmood's Avatar
    Join Date
    Mar 2004
    Location
    Islamabad
    Age
    34
    Posts
    1,998
    Follows
    1
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    @hondafanatic
    oil pressure guage, i dont think we both have any such indication on our dash panel so it got to be someting else and i think @xulfiqar bhai have a point there, what do say of it

    @xulfiqar
    thats great info for me will check both IAC and PCV in daylight tomorrow, if you can tell me, can seals of drive shaft be changed without removing transmission, there is very very minor oil leakage on right hand side drive shaft at transmission end, is this seal problem or can be something else??????

    and one more thing how to check gear oil level on manual transmission, i know auto tranny has a dipstick but in my case what would be the scene

  6. #6
    Senior PakWheeler Follow
    Xulfiqar's Avatar
    Join Date
    Aug 2003
    Location
    Other
    Age
    38
    Posts
    24,400
    Follows
    131
    Following
    0
    Mentioned
    3988 Post(s)
    Tagged
    94 Thread(s)
    Problems Posted
    0
    Problems Solved
    4
    Best Answers
    0
    Good Answers
    6

    Default

    well - firstly I speak with guarantee that the 2 pin plug is the coolant temperature sensor for the ECU

    anyways - the trans oil should be level with the fill port bottom - you can check by taking out the bolt and feel with a wire or see it dribble out.

  7. #7
    PakWheeler Follow
    mas_mdk's Avatar
    Join Date
    Jan 2010
    Location
    Muridkay
    Posts
    23
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Xulfiqar is 100 percent right.
    Voted.

    <input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">

  8. #8
    Senior PakWheeler Follow
    mahmood's Avatar
    Join Date
    Mar 2004
    Location
    Islamabad
    Age
    34
    Posts
    1,998
    Follows
    1
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    guys, that PCV and IAC part is still pending, didnt bothered much about the IAC but tried to locate the PCV and failed, i'll upload snaps and you guys may lead me to the stuff perhaps on weekend if got some time.

  9. #9
    Senior PakWheeler Follow
    imtishal's Avatar
    Join Date
    Sep 2006
    Location
    Lahore
    Age
    42
    Posts
    3,881
    Follows
    1
    Following
    0
    Mentioned
    11 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    1

    Default

    @Mahmood..

    Xulfiqar has answered about the location of IAC sensor.it's underneath the air filter manifold.And if u r facing the engine from front it should reside on the left side of throttle body.and as xulfiqar mentioned it's greenish denso part with three connectors.
    Qaiser Pal,I have not failed.But found 1 of 10,000 ways which doesn't work.....Toyota driver "I couldn't repair my brakes,so i made my horn louder"..When i was born i was so surprised that i didn't talked to one and half year..since light travel faster then sound,people appear bright until you hear them speak..If u can't convince them,confuse them

  10. #10
    Senior PakWheeler Follow
    mahmood's Avatar
    Join Date
    Mar 2004
    Location
    Islamabad
    Age
    34
    Posts
    1,998
    Follows
    1
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    dont see any greenish thingy where mentioned, does it require air filter stuff to be removed for access??????????????

  11. #11
    Senior PakWheeler Follow
    imtishal's Avatar
    Join Date
    Sep 2006
    Location
    Lahore
    Age
    42
    Posts
    3,881
    Follows
    1
    Following
    0
    Mentioned
    11 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    1

    Default

    it's on the opposite side of race cable.yes u need to remove the air filter box to access.BUT y u need to access IAC??
    Qaiser Pal,I have not failed.But found 1 of 10,000 ways which doesn't work.....Toyota driver "I couldn't repair my brakes,so i made my horn louder"..When i was born i was so surprised that i didn't talked to one and half year..since light travel faster then sound,people appear bright until you hear them speak..If u can't convince them,confuse them

  12. #12
    Senior PakWheeler Follow
    mahmood's Avatar
    Join Date
    Mar 2004
    Location
    Islamabad
    Age
    34
    Posts
    1,998
    Follows
    1
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    for the sake of pure punga

  13. #13
    Senior PakWheeler Follow
    imtishal's Avatar
    Join Date
    Sep 2006
    Location
    Lahore
    Age
    42
    Posts
    3,881
    Follows
    1
    Following
    0
    Mentioned
    11 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    1

    Default

    If u really want to take panga then open throttle body and intake manifold.clean it and the re-install it.Also do plug indexing.u'll feel the difference in pik,idle rpm,avg,top speed etc urself..
    Qaiser Pal,I have not failed.But found 1 of 10,000 ways which doesn't work.....Toyota driver "I couldn't repair my brakes,so i made my horn louder"..When i was born i was so surprised that i didn't talked to one and half year..since light travel faster then sound,people appear bright until you hear them speak..If u can't convince them,confuse them

  14. #14
    Senior PakWheeler Follow
    mahmood's Avatar
    Join Date
    Mar 2004
    Location
    Islamabad
    Age
    34
    Posts
    1,998
    Follows
    1
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    okaaaaa, this is my first efi one so need a role model as well, air filter change kia tha, radiator remove kar k poora cooling system flush kar k coolant dala tha few more things too. but for this high profile indexing waghera have no idea till now, you told that you will do indexing, why not you put step by step DIY for me here

  15. #15
    Senior PakWheeler Follow
    imtishal's Avatar
    Join Date
    Sep 2006
    Location
    Lahore
    Age
    42
    Posts
    3,881
    Follows
    1
    Following
    0
    Mentioned
    11 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    1

    Default

    bhai jaan.jut search indexing of plugs the writer name is racerf or racerf1.so process is already posted here.han throttle body ki cleaning is something different.
    Qaiser Pal,I have not failed.But found 1 of 10,000 ways which doesn't work.....Toyota driver "I couldn't repair my brakes,so i made my horn louder"..When i was born i was so surprised that i didn't talked to one and half year..since light travel faster then sound,people appear bright until you hear them speak..If u can't convince them,confuse them

  16. #16
    PakWheeler Follow
    hamadnajam's Avatar
    Join Date
    Apr 2009
    Location
    Multan
    Age
    33
    Posts
    78
    Follows
    0
    Following
    0
    Mentioned
    8 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by mahmood View Post
    i want some help from experts regarding honda city 2000-2003 engine, stock engine is D13B4, i wanna know
    1. Is stock engine came with PCV valve? if yes plz indicate location
    2. Does stock engine have IAC valve? if yes please indicate location
    3. what is funtion of follwing circled sensor, and just behind that sensor there is i beleive another sensor which if fed by red wire i have mentioned with arrow head what is it?
    honda city 2000 engine technical info required - 13601 honda city fan club engine

    i also happen to have owner manual for same mentioned models, if anybody requires any info from it, i will be pleased to help
    @mahmood: I have just bought city 2000 and require its owner manual. Can u pls help me in this regard?

  17. #17
    Site Banned Follow
    vicky69's Avatar
    Join Date
    Apr 2010
    Location
    Karachi
    Age
    28
    Posts
    4
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    HI SaLaM To ALLL...HRu MAHMOoD...iTz ME ViCKY MaLIk FroM KaRaChi...Em MEcHaNICaL Engineer...I CaN WoRk ON ALL MAKEs N MODeLZ...PETrOL,Diesel Engines N CNG ALsO....IF U NEED MY HELP...KINDLY GiVe Me Ur E-MAIL ID..I SeND MY WhOLe ProFile MY BIO-DATA...I Hav three big workshops,Garages in karachi

    Em still w8ing for ur early reply

  18. #18
    Senior PakWheeler Follow
    mahmood's Avatar
    Join Date
    Mar 2004
    Location
    Islamabad
    Age
    34
    Posts
    1,998
    Follows
    1
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    @hamadnajam
    congrats on your purchase, i also purchased owner manual afterwards, will check with the guy and let you know if he had other available, meanwhile do let me know what specific info you require from manual and i'll put it in city fan club, i will upload manintenance schedule pages on fan club tomorrow, that will help i beleive.

    @viky
    i can guess what sort of mechanical engg. you are, who cant get his writing skills right, first put some of your "engg. skills" to fix your writing than talk.

  19. #19
    PakWheeler Follow
    ngen's Avatar
    Join Date
    Oct 2008
    Location
    Islamabad
    Age
    38
    Posts
    166
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    PCV location is on the tappet cover ... sometimes bright green in colour (made of plastic) otherwise could be made of metal. plastic ones you can just pull out ... metal ones you need to un-screw. there will be a rubber pipe going from the pcv to either the throttle body or the intake manifold.

    IAC - location is on the throttle body itself. there are normally 2 sensors on the throttle body ... one is directly opposite to the accelerator cable side which is the TPS... there will be another either underneath or on the side which is the IAC.
    you will most likely have to take out the air cleaner box to view/access the IAC easily.

  20. #20
    Senior PakWheeler Follow
    cooldevil's Avatar
    Join Date
    Nov 2010
    Location
    Islamabad
    Posts
    3,047
    Follows
    1
    Following
    0
    Mentioned
    45 Post(s)
    Tagged
    5 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    hey buddy i wanna get some help from u : ) ...these dayz i can see an orange coloured light in the speedometer of my 2002 city! i dont know wat is the problem|!

Closed Thread
Page 1 of 2 12 LastLast

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •