Survey by Qualaroo
+ Reply to Thread
Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 55

Thread: Want my civic 99 look dashing and graceful

  1. #1
    PakWheeler Follow
    muasif's Avatar
    Join Date
    Sep 2008
    Location
    Islamabad
    Age
    36
    Posts
    117
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default Want my civic 99 look dashing and graceful

    I want my car to look dashing and graceful. For example I want the following things in my car. Can anyone suggest whether I can have all this in my car and whether these accessories are available.

    1. I want to see the level of my car's gear oil just like an indication on my dashboard.

    2. I want my car to have a meter that shows the air pressure of all my car tyres and if there is low pressure in any one tyre I can press a button and fill air in it sitting right inside my car.

    3. I want to have a screen in my car that shows the visual representation of my cars alignment and tells me if my car needs alignment.

    4. I want to have that extra silencer big mouth opening. Also I want to know why is it so big.

    5. I want to paint my car's bonnet and fenders and want to match my cars original color. Currently the paint is bad. Can anyone suggest good painter who paints good metalic colors.

    6. I want to have best mud gaurds.

    7. I want to have that extra openings in my bonnet for air circulation

    8. I want to have that extra rubber in my air filter pipe so that my car gives good performance on CNG

    9. I want to put woofer fixed in my car back seat.

    10. Where can I buy a platinum Engine for my car.

    Can anyone suggest how can I get all these and where and how. Does any have all this in his car.

    Regards,
    Asif


  2. #21
    PakWheeler Follow
    muasif's Avatar
    Join Date
    Sep 2008
    Location
    Islamabad
    Age
    36
    Posts
    117
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Ok for the people who were arguing how the pressure monitoring is possible. Please follow the following link

    Tire-pressure monitoring system - Wikipedia, the free encyclopedia

    Now for people who thinks how pressure can be maintained. Look for it your will find it too otherwise i will have to do that job too.

    Also check the specs for Cadillac and you will know a little about what technologies have come into play till now

    2010 CTS Sport Sedan Specs and Features | Cadillac

  3. #22
    PakWheeler Follow
    muasif's Avatar
    Join Date
    Sep 2008
    Location
    Islamabad
    Age
    36
    Posts
    117
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    @adyiator

    As I have mentioned above the Tire Pressure Monitoring Systems are in place, I believe that Tire Pressure Controlling System will also be in place.

    Otherwise I have one idea that might have drawbacks but let me put it straight.

    Why not have a bearing over the tire air-in knob and attach a duct to that air-in knob via that bearing and have the air compressor work while the car is moving.

  4. #23
    Senior PakWheeler Follow
    Cylestyne's Avatar
    Join Date
    Oct 2005
    Location
    Karachi
    Age
    32
    Posts
    5,160
    Follows
    2
    Following
    0
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    ^ High-end trucks have a tire pressure management system (this also inflates tires automatically). There's even a patent for it:

    Tire pressure management system - Patent 5505080

    Sell your Civic and buy a truck
    ProSpeed Imports -- www.prospeedimports.com -- Car parts direct from USA, Japan & Europe to your doorstep! Email us at special.requests@prospeedimports.com. Don't forget to ask about our special car wrapping, change the color of your car without changing the paint ;-)

  5. #24
    PakWheeler Follow
    muasif's Avatar
    Join Date
    Sep 2008
    Location
    Islamabad
    Age
    36
    Posts
    117
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    @Cylestyne

    Ya good suggestion.

  6. #25
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,928
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    simple sell ur civic and get a GTR
    Hanjiii Kaa Storeey Eehh !

  7. #26
    Site Banned Follow
    malik593's Avatar
    Join Date
    Jan 2008
    Location
    Beijing
    Age
    26
    Posts
    2,855
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    my dog just read this thread and now he is not coming back

  8. #27
    Senior PakWheeler Follow
    adyiator's Avatar
    Join Date
    Feb 2005
    Location
    Lahore
    Age
    38
    Posts
    1,225
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by muasif View Post
    @adyiator

    As I have mentioned above the Tire Pressure Monitoring Systems are in place, I believe that Tire Pressure Controlling System will also be in place.

    Otherwise I have one idea that might have drawbacks but let me put it straight.

    Why not have a bearing over the tire air-in knob and attach a duct to that air-in knob via that bearing and have the air compressor work while the car is moving.

    What you are saying is a good idea.
    I'm struggling to please ALLAH, I'll suggest you do the same.

  9. #28
    PakWheeler Follow
    xaad's Avatar
    Join Date
    Nov 2010
    Location
    Wah cantt
    Age
    23
    Posts
    292
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    hahahaha buy a jf 17 thunder

  10. #29
    Senior PakWheeler Follow
    juadjee's Avatar
    Join Date
    Dec 2008
    Location
    Karachi
    Age
    30
    Posts
    1,367
    Follows
    0
    Following
    0
    Mentioned
    12 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    All of these are possible.. Go for it! And let us know how it goes :p
    The pain of war cannot exceed the woe of aftermath.

  11. #30
    Senior PakWheeler Follow
    xenerking's Avatar
    Join Date
    Nov 2009
    Location
    Lahore
    Age
    36
    Posts
    1,028
    Follows
    0
    Following
    0
    Mentioned
    16 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by adyiator View Post
    Filling the tires on demand, is something i was thinking myself. but as the tire continuously moves, there must be a valve with the brake housing. but the valve must have a rotating pipe which could fill the air on demand.

    well, if it's already in application with some cars then, more can be found from that design, if it's not yet invented, then some one should work on prototype.

    although i like your idea, whereas it is from bond movie.

    brother...it is very much possible...nd already in service....there are high pressure canister inbuilt in rims which are being controlled through IR...they moniter the tyre pressure and show it in instrument cluster and inflate a tyre when needed...u only need to replace the cartridges....mostly installed in German cars....Honda...Power of dreams...now u know wat i mean....

  12. #31
    PakWheeler Follow
    irfanali81's Avatar
    Join Date
    Jun 2010
    Location
    Rawalpindi
    Age
    34
    Posts
    267
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    No. 2 is possible by using some proximity sensors(expensive) or Infrared transmitter(cheapest one). Since i am an electrical engineer, i must think from my own vision. But for filling of air in running tyres you must need help from some mechanical engineers, I think rotary air compressors can be used for this purpose... I must say Nothing is impossible... For all these stuff you need help from software engineers(who can make a software), Electrical Engineer(Who can know which sensor and where to install) and Mechanical Engineer.. This can be a good topic for Thesis/project of final year engineers.
    Irfan Ali
    Electrical Engineer

  13. #32
    PakWheeler Follow
    muasif's Avatar
    Join Date
    Sep 2008
    Location
    Islamabad
    Age
    36
    Posts
    117
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    @xenerking

    You have a good point to make. If you can also tell about some sources where we can have these things installed in our cars then i will be more grateful to you.

  14. #33
    Senior PakWheeler Follow
    xenerking's Avatar
    Join Date
    Nov 2009
    Location
    Lahore
    Age
    36
    Posts
    1,028
    Follows
    0
    Following
    0
    Mentioned
    16 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by muasif View Post
    @xenerking

    You have a good point to make. If you can also tell about some sources where we can have these things installed in our cars then i will be more grateful to you.

    forget that for a while...and tell us why do u want to have BEST mud gaurds????

  15. #34
    PakWheeler Follow
    muasif's Avatar
    Join Date
    Sep 2008
    Location
    Islamabad
    Age
    36
    Posts
    117
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Actually when your mud gaurds are not good the sand and dust comes and wrap up your car lower body. And secondly bad mud gaurds touch the tyres and damage them as well.

  16. #35
    Senior PakWheeler Follow
    xenerking's Avatar
    Join Date
    Nov 2009
    Location
    Lahore
    Age
    36
    Posts
    1,028
    Follows
    0
    Following
    0
    Mentioned
    16 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by muasif View Post
    Actually when your mud gaurds are not good the sand and dust comes and wrap up your car lower body. And secondly bad mud gaurds touch the tyres and damage them as well.

    brother...mud flaps are used to keep the water and mud from flying on to other objects in vicinty of running car while moving though on a road having water or mud on surface....no way they can prevent from dust sticking under ur car....and they only touch ture when ur wheel (front) or bumper ( back ) on which they are fixed is not in place....

    besides that i dont see any purpose of mud guards...

    try to lower ur car and install a huge lip on front bumber which should be almost kissing the ground...in this way it will scoop up all dust sand debri on the road to upper body of ur car and there wont be much of dust sticking under ur car....

  17. #36
    Senior PakWheeler Follow
    UJ_36's Avatar
    Join Date
    Dec 2009
    Location
    Sialkot
    Age
    26
    Posts
    3,211
    Follows
    1
    Following
    0
    Mentioned
    8 Post(s)
    Tagged
    2 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    building castle in air

  18. #37
    PakWheeler Follow
    muasif's Avatar
    Join Date
    Sep 2008
    Location
    Islamabad
    Age
    36
    Posts
    117
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    @xenerking Ok thanks. I will try the idea.

  19. #38
    Senior PakWheeler Follow
    xenerking's Avatar
    Join Date
    Nov 2009
    Location
    Lahore
    Age
    36
    Posts
    1,028
    Follows
    0
    Following
    0
    Mentioned
    16 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    nd why do u want to have VISUAL indication that alignment is out when u can actualy feel it and tyres are also shouting it loud everytime u stop or turn ur car sharply....

    i guess this feature wud never been tested or applied even to any concept cars caz of ZERO benefit and use....

    BTW....if ever i had to do it in my wildest dreams (nightmares) i wud get my cars wheel perfectly aligned and then installed laser designators on each of hubs and marking a spot on body of car making it as a legend indication a perfectly aligned wheels....afterwards if i had to check alignment i wud got for any variance visible on that legend....

    to check camber...we can glue a level indicator on the hubs offcourse after getting a perfect adjustment of camber....

  20. #39
    Senior PakWheeler Follow
    ToofaneBatameezi's Avatar
    Join Date
    Oct 2008
    Location
    Karachi
    Age
    30
    Posts
    12,095
    Follows
    1
    Following
    0
    Mentioned
    10 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Delete all the points and make only one wish; I want to be a Shaikh!
    Nothing to see here.

  21. #40
    Senior PakWheeler Follow
    xenerking's Avatar
    Join Date
    Nov 2009
    Location
    Lahore
    Age
    36
    Posts
    1,028
    Follows
    0
    Following
    0
    Mentioned
    16 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    hood of car not having turbo chargers and intercollers is sealed delibrately so that maximum amount of air pass though radiator of car....

    cars isntalled with turbos, air intakes or intercoolers have vents in hood....

    and try everything at yur on risk...

+ Reply to Thread
Page 2 of 3 FirstFirst 123 LastLast

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •