gyzz plz helphave recently bought a dolphin civic 95 in a good condition but since it was kept in show room no body bothered to work abt its suspension....since i bought it... the suspension was not good... changed its shocked with kabli and its upper chimta bushes ( all 4 both side) and its ball studs with honda new parts ( costed 2k for buahes and ball stud) ... but still its not giving that chuss ( fun)... its still gives a feeling of floating sort of feeling on bumpy road... its grip on road just sucks... plz advice what all other bushes critical to remove this fault ... also on road when passes over the cat eyes .. a sort of " ching" like nose comes from the passanger side... :'(... and seems as f if the front tyres wobbled...
feels like ppl to be paid to post comments :-o
Change bushes since bushes would have completed their life now bushes when dry can cause some unwanted noises and effect suspension performance get work done from some professional
Get new struts, springs and bushes.
the bushes are being changed on whim? or are actually being tested?
did someone check the trailing arm bushing?
didn't checked rear wheels at all ... just the front ones shocks were complete flat...and got them changed.. also the upper chimta bushes and ball joints bpth side thats why i thought might b this fault only and one another strange sort of problem that no 3 cylender ignition coils pops out when start engine and give acceleration...is it coil problem and f so how to chk it ?? will do go to mech but first i wana the knowledge myself from the seniors and the experinced one coz the mech cost more for their experience than what they do
@ zulfiqar bushes and ball joint with jenuine honda parts and shocks with kabli from mingora swat
No 3 cylinder ignition coil? What engine do you have in your car?
Engine is d15b3 ... by 3rd cylinder i mean 3nd from left facing car
D15b3 is a carby engine, it does not have ignition coils for each cylinder. Do you mean the spark plug wire?
exactly wahe i thought its called coil...it pops out from the cylinder as i give acceleration
HelpPlz help me wid picture installation of ignition leads have forgotten the sequenceCant even take the car to