Survey by Qualaroo
+ Reply to Thread
Results 1 to 12 of 12
Like Tree11Likes
  • 1 Post By khjodat1
  • 8 Post By maisambutt
  • 1 Post By Banoori555
  • 1 Post By Banoori555

Thread: Home made engine flush formula.

  1. #1
    Site Banned Follow
    khjodat1's Avatar
    Join Date
    Jan 2016
    Posts
    55
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    Problems Solved
    Best Answers
    Good Answers

    Default Home made engine flush formula.

    Just try the home made engine flush formula as under;
    1) Put 300 ML diesel in engine.
    2) Put 60 ML kerosene oil in engine.
    3) Put 200 ML automatic transmission oil in engine.
    Run the engine in idle speed for 15 minutes. Stop the engine and drain the oil. Replace engine oil filter and add new oil.
    Best homemade formula for engine flushing.
    Regards,
    Khawaja Jodat
    Chemical Engineer
    Wapda Town
    Lahore
    03458437344


  2. #2
    Senior PakWheeler Follow
    VCheng's Avatar
    Join Date
    May 2010
    Location
    Select City
    Posts
    25,475
    Follows
    7
    Following
    1
    Mentioned
    434 Post(s)
    Tagged
    4 Thread(s)
    Problems Posted
    0
    Problems Solved
    1
    Best Answers
    0
    Good Answers
    0

    Default

    How has this concoction been shown to be the "best" as claimed?

  3. #3
    PakWheeler Follow
    maisambutt's Avatar
    Join Date
    Sep 2007
    Location
    Lahore
    Age
    25
    Posts
    570
    Follows
    0
    Following
    1
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    after trying the above totka (if it doesnt work)

    you can Visit bilal Ganj for a new & better engine

  4. #4
    Site Banned Follow
    khjodat1's Avatar
    Join Date
    Jan 2016
    Posts
    55
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    Problems Solved
    Best Answers
    Good Answers

    Default

    The ingredients in this formula are in a little quantity so it won't hurt the engine whatsoever. Completely safe for any engine. Even this homemade engine flush formula is used in Europe with no complaint. Just take care not to race the engine during using this engine flush. STP and other popular engine flush contain these ingredients.

  5. #5
    x2
    x2 is offline
    PakWheeler Follow
    x2's Avatar
    Join Date
    Sep 2005
    Location
    Islamabad
    Age
    41
    Posts
    484
    Follows
    1
    Following
    1
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    9
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

  6. #6
    PakWheeler Follow
    Banoori555's Avatar
    Join Date
    Jul 2013
    Location
    Lahore
    Age
    42
    Posts
    356
    Follows
    1
    Following
    0
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quantity of formula is good for all vehicles or it varies as per oil capacity , as lubricant capacity differs in bigger machines, please clarify the query ?

  7. #7
    Site Banned Follow
    khjodat1's Avatar
    Join Date
    Jan 2016
    Posts
    55
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    Problems Solved
    Best Answers
    Good Answers

    Default

    100 ML mixture of this formula per one liter of engine oil is recommended. For example if your car engine has the capacity of 4 liter oil then 4 x 100 = 400 ML homemade engine flush formula quantity is enough for the engine.

  8. #8
    PakWheeler Follow
    Banoori555's Avatar
    Join Date
    Jul 2013
    Location
    Lahore
    Age
    42
    Posts
    356
    Follows
    1
    Following
    0
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Thanks
    Means mixture is added to old (already existing) oil which is about to be changed & engine is cranked before flushing / draining old oil for a while , what about wiping remaining residual of this cleaning mixture from chamber . Does another intermediary thinner grade lubricant is recommended for running engine for few days or so .

  9. #9
    Senior PakWheeler Follow
    saboor73's Avatar
    Join Date
    Oct 2013
    Location
    Karachi
    Posts
    10,545
    Follows
    25
    Following
    0
    Mentioned
    349 Post(s)
    Tagged
    14 Thread(s)
    Problems Posted
    0
    Problems Solved
    6
    Best Answers
    2
    Good Answers
    25

    Default

    Quote Originally Posted by maisambutt View Post
    after trying the above totka (if it doesnt work)

    you can Visit bilal Ganj for a new & better engine
    Atf is best when it comes to take care of carbon don't believe me put it on your car alternater and tear it down than see what it did to alternator brushes plus diesel and petrol want harm anything some professional technicians even top all diesel or kerosine oil in old engine and drain before openion up the engine

    Can you please share what harm you think these things will do to engine ?

  10. #10
    Senior PakWheeler Follow
    saboor73's Avatar
    Join Date
    Oct 2013
    Location
    Karachi
    Posts
    10,545
    Follows
    25
    Following
    0
    Mentioned
    349 Post(s)
    Tagged
    14 Thread(s)
    Problems Posted
    0
    Problems Solved
    6
    Best Answers
    2
    Good Answers
    25

    Default

    Quote Originally Posted by Banoori555 View Post
    Quantity of formula is good for all vehicles or it varies as per oil capacity , as lubricant capacity differs in bigger machines, please clarify the query ?
    Don't perform this on a motorcycle engine with wet clutch

  11. #11
    Site Banned Follow
    khjodat1's Avatar
    Join Date
    Jan 2016
    Posts
    55
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    Problems Solved
    Best Answers
    Good Answers

    Default

    Yes you put the engine flush mixture into engine with old oil & keep idle running of engine for 10 to 15 minutes & then drain old oil thoroughly till the oil comes out in drops form. Now put new filter & add fresh oil. The very little quanity of engine flush left in engine is so small that it won't do any harm to engine. Next time change formula a bit as under;
    1) Diesel 100 ML
    2) Kerosine oil 50 ML
    3) Automatic transmission oil 500 ML
    This is even more effective formula but it is slightly costly as more ATF is used. However, its all depends on your choice.

  12. #12
    PakWheeler Follow
    Banoori555's Avatar
    Join Date
    Jul 2013
    Location
    Lahore
    Age
    42
    Posts
    356
    Follows
    1
    Following
    0
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Thanks for the details , regards

+ Reply to Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •