well yesterday i got my apexi turbo timer taken off by an unexperienced electrician, at the same time when my exhaust was bieng fixed due to a leak by a proffesional and experienced mechanic.... khair we gave 10-12 good hard runs and it ran perfectly, later on i was coming home and driving slow, after 2 mins from departure from the workshop, when i was in second gear i floored it and all of a sudden at 4000 rpm the car sat and made a gobble gobble sound and just shut off, now ehnever u start it it goes to 2000 rpm gobbles again and shuts down, later that moment, after a few selfs (ignitions) the main fuse blew (which i replaced and now its fine) and the problems of start up still remains, Allhamdollilah the engine is fine but HPR says its a problem in the computer and there are chances that the computer gave up (which i think is sheer bullsh*t) since this happened before too when my car was stock and i took it to an electrician (nazeer autos G-8) who connected the car to his detecting computer and turned out that one of the sensors were blocked, which he unlocked and the car was perfectly fine.... this problem was due to the unexperienced electrician taking off the timer and mixing up some wires.... so any input on what may have happend and if the car is saved? (hope so)