Hello!
Well Time To Post More...
Hope You Ppl Likes What I am Posting....!
Day 4
01-11-2007
Today..Its Time To Start In The Loom Work...As Loom Is In Very Nice Condition With Almost All Connectors Intact But Wiring Is Cutted From Firewall.....So Have To Make It Till ECU ..
The Imp Thing Comes Here Is How To Joint.......! As For Making Lengthy Wires..I Need To PUt 3 Joints.....! And Making 3 Joints In Place Where It Needs To be Cared So Much Else One Wire Short And All Goes Wrong.....!
So I Need To Take Help From TOYOTA Technical Articles And Found A Best Way To Join Them...!
Will Show You Later..
Here I Am on Very 1st Day of Nov 2007 Starting Wiring Work...!
1st Thing You Need To Know...Which Connector Belongs To Which....So Marking Is 1st Thing To Do....!!
Its HowI Marked Connector....!!
Looms Getting Marked
Another Look....!!
26Pin 16Pin and 22Pins Conenctors....!!
Sensors Lying Around With Some Stuff...!!
That Day..I Find And Mark Connectors......! Some Are Still Left As There Are So Many...
Thats All For Day 4......!!
Regards