the first pic was taken by me ..
so i have this thing .. and bought it for like 60 rs . i dont remember eactly .. but its uselss ..
i would recomend the flat nose pliers .. i have later bought those and they are many many times better .. definitely go for pliers ..
regarding availability .. it will be available at shopes which sell support accessories for bikes cars mechanics .. just ask any mechanic yar dukan kholni ha bikes ki chotay bhai ka lia saman kider sa mila ga ... hahaha dont tell them u want it for urself .. they wont tell u .. same experience here
regarding the feeler gauge its commonly called tappet gauge .. at one shop it was there and it was written on it. but shopkeeper said nai ha .. on pointing it he gave it to me and said its not called feeler gauge its tappayyyyyy gagggggggggggggge .. :-# even it feeler gauge was written on it in english... the one labelled easier is hard to find . i never found it .. they said only honda provides these tools to its mechanics ..
so i bough a multi tooth one .. the one labelled hard one ..
it coust me 125 rs .. but there was an expensive version which was like 500 rs .. or 350 rs .. but was much expensive .. also that was of finer grade material .. rust resistant but that had no .05mm readings ..
the cheapo has many readings in it .. so buy that .. and that will help u adjust spark plug gap as well ..
also u can buy much finer material single reading strip for 90 rs .. its just one strip of .05mm reading .. its like 1foot in length .. just cut few inches from it and bend it to required shape .. and u are good to go ..
i will be making video on these tappet adjustments .. but dont get good opporunity .. but this time i am determind to upload it .. last time severe loadsheding did not allow me to upload it . now i hope i will be able to upload it .