Survey by Qualaroo
+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 21 to 39 of 39

Thread: 70CC Missing

  1. #1
    PakWheeler Follow
    asad12347's Avatar
    Join Date
    Mar 2015
    Location
    Karachi
    Posts
    46
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    2
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default 70CC Missing

    Hey Guys, Hope all are good?

    I am facing carb issues. Built complete engine with New Head+Cyclinder (78cc) added new Saz Carb (hero) with 85MJ & 34PJ. then bike ki race nai kam ho rhi thi, went to a mechanic he adjusted it. i drove it to 600KM after oil change we thought to give engine a speed try. it was bad.
    bike shows missing at pick. we tried changing carb but no good. 4th gear mai race chor kr uthao to aisa lagta h sara petrol khtm hgya, jhatky mar kr set hjti h. almost wasted 4 5 hours, no luck.
    then we remove air filter its not showing missing now. but bike is getting heatup. and i dont want to run it without air filter.
    any advice what will be the cause? went to 3 diff mechanic all are saying carb is not good. (changing carb not solving problem)
    1 said to get a original Hero carb from Honda dealers, i am worried if i bought it and still no use, then!
    please can anyone suggest what will be the issue?


  2. #21
    Senior PakWheeler Follow
    Hassan1991's Avatar
    Join Date
    Mar 2013
    Location
    Lahore
    Age
    20
    Posts
    2,268
    Follows
    3
    Following
    0
    Mentioned
    37 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Two screws are located outside the carb one of them are for race
    The first step towards knowledge is to know that WE are IGNORANT

  3. #22
    PakWheeler Follow
    asad12347's Avatar
    Join Date
    Mar 2015
    Location
    Karachi
    Posts
    46
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    2
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Hassan1991 View Post
    Two screws are located outside the carb one of them are for race
    Yes, we set the petrol screw first. then race waly ko kam krty h tu aik jaga akr race kam nai hti, beshak pora screw bhi kholdo.

  4. #23
    Senior PakWheeler Follow
    Hassan1991's Avatar
    Join Date
    Mar 2013
    Location
    Lahore
    Age
    20
    Posts
    2,268
    Follows
    3
    Following
    0
    Mentioned
    37 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by asad12347 View Post
    Yes, we set the petrol screw first. then race waly ko kam krty h tu aik jaga akr race kam nai hti, beshak pora screw bhi kholdo.
    Accelerator ki wire check kari theek hai accelerator ka necha setting hoti hai usa set kro vo kharab ho gii
    The first step towards knowledge is to know that WE are IGNORANT

  5. #24
    PakWheeler Follow
    asad12347's Avatar
    Join Date
    Mar 2015
    Location
    Karachi
    Posts
    46
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    2
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Hassan1991 View Post
    Accelerator ki wire check kari theek hai accelerator ka necha setting hoti hai usa set kro vo kharab ho gii
    cable bhi thk h, grip waly screw ky setting bhi check krli, no good.

  6. #25
    Senior PakWheeler Follow
    Hassan1991's Avatar
    Join Date
    Mar 2013
    Location
    Lahore
    Age
    20
    Posts
    2,268
    Follows
    3
    Following
    0
    Mentioned
    37 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by asad12347 View Post
    cable bhi thk h, grip waly screw ky setting bhi check krli, no good.
    Masla wire sa hi hai keu ka "slie" ek jagha pa aa kr stuck ho jati hai isi vaja sa screw set krna sa bhi kam nae hoti
    The first step towards knowledge is to know that WE are IGNORANT

  7. #26
    PakWheeler Follow
    asad12347's Avatar
    Join Date
    Mar 2015
    Location
    Karachi
    Posts
    46
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    2
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Hassan1991 View Post
    Masla wire sa hi hai keu ka "slie" ek jagha pa aa kr stuck ho jati hai isi vaja sa screw set krna sa bhi kam nae hoti
    Then i will change cable with a new one. lets see...

  8. #27
    Senior PakWheeler Follow
    Hassan1991's Avatar
    Join Date
    Mar 2013
    Location
    Lahore
    Age
    20
    Posts
    2,268
    Follows
    3
    Following
    0
    Mentioned
    37 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by asad12347 View Post
    Then i will change cable with a new one. lets see...
    Don't change cable right now brother first be sure
    Said mechanic that check it's grip nut and also the cable
    The first step towards knowledge is to know that WE are IGNORANT

  9. #28
    PakWheeler Follow
    asad12347's Avatar
    Join Date
    Mar 2015
    Location
    Karachi
    Posts
    46
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    2
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Hassan1991 View Post
    Don't change cable right now brother first be sure
    Said mechanic that check it's grip nut and also the cable
    Hi Bro, checked the accelerator cable its fine, Showed to mechanic he's saying no problem with the cable.

  10. #29
    Senior PakWheeler Follow
    Hassan1991's Avatar
    Join Date
    Mar 2013
    Location
    Lahore
    Age
    20
    Posts
    2,268
    Follows
    3
    Following
    0
    Mentioned
    37 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by asad12347 View Post
    Hi Bro, checked the accelerator cable its fine, Showed to mechanic he's saying no problem with the cable.
    Then brother slide is not matching the jet means it is not touching the jet when accelerator is ideal
    Put the slide notch at the second point......start counting from top
    So the slide goes downwards more

    Problem of missing is solved?
    The first step towards knowledge is to know that WE are IGNORANT

  11. #30
    PakWheeler Follow
    asad12347's Avatar
    Join Date
    Mar 2015
    Location
    Karachi
    Posts
    46
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    2
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Hassan1991 View Post
    Then brother slide is not matching the jet means it is not touching the jet when accelerator is ideal
    Put the slide notch at the second point......start counting from top
    So the slide goes downwards more

    Problem of missing is solved?
    Yes missing is gone now, showing excellent pick. I have first move the C clip on 2 position, no good then i have moved it to first point, still no good

  12. #31
    Senior PakWheeler Follow
    Hassan1991's Avatar
    Join Date
    Mar 2013
    Location
    Lahore
    Age
    20
    Posts
    2,268
    Follows
    3
    Following
    0
    Mentioned
    37 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by asad12347 View Post
    Yes missing is gone now, showing excellent pick. I have first move the C clip on 2 position, no good then i have moved it to first point, still no good
    First!! Starting from the top....
    Race is how much...to irritating level
    The first step towards knowledge is to know that WE are IGNORANT

  13. #32
    PakWheeler Follow
    asad12347's Avatar
    Join Date
    Mar 2015
    Location
    Karachi
    Posts
    46
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    2
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Hassan1991 View Post
    First!! Starting from the top....
    Race is how much...to irritating level
    Yes, its seem like ky apny race di hoe ho bike ko.

  14. #33
    Senior PakWheeler Follow
    Hassan1991's Avatar
    Join Date
    Mar 2013
    Location
    Lahore
    Age
    20
    Posts
    2,268
    Follows
    3
    Following
    0
    Mentioned
    37 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by asad12347 View Post
    Yes, its seem like ky apny race di hoe ho bike ko.
    Ap phir jet slide change kr loo dono match nae ho rha
    The first step towards knowledge is to know that WE are IGNORANT

  15. #34
    PakWheeler Follow
    asad12347's Avatar
    Join Date
    Mar 2015
    Location
    Karachi
    Posts
    46
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    2
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Hassan1991 View Post
    Ap phir jet slide change kr loo dono match nae ho rha
    ok will go market tmrw for slide & jet, then lets see.

  16. #35
    Senior PakWheeler Follow
    Hassan1991's Avatar
    Join Date
    Mar 2013
    Location
    Lahore
    Age
    20
    Posts
    2,268
    Follows
    3
    Following
    0
    Mentioned
    37 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by asad12347 View Post
    ok will go market tmrw for slide & jet, then lets see.
    You showed to mechanic what he's saying
    No doubt they no nothing
    The first step towards knowledge is to know that WE are IGNORANT

  17. #36
    PakWheeler Follow
    asad12347's Avatar
    Join Date
    Mar 2015
    Location
    Karachi
    Posts
    46
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    2
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Hassan1991 View Post
    You showed to mechanic what he's saying
    No doubt they no nothing
    yar i have shown to 4 5 diff mechanic, they all spend 5 6 hours with it, wasting my time and money for nothing. fed up with the mechanic now. trying myself. with your help missing is gone now (Alhamdulillah).

    Here mechanics are good for tuning only. the one build the engine has no idea, and other are saying we haven't face any issue's like this.

  18. #37
    PakWheeler Follow
    asad12347's Avatar
    Join Date
    Mar 2015
    Location
    Karachi
    Posts
    46
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    2
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Before the engine rebuild completely, i took suggestions from many people, all suggested to rebuild it and not go for the new bike (bht achi bni hoe h ap engine bnalo bht maza kry gi bike) now i understand the enjoyment. 3 weeks up still facing problems... ahh...

  19. #38
    Senior PakWheeler Follow
    Hassan1991's Avatar
    Join Date
    Mar 2013
    Location
    Lahore
    Age
    20
    Posts
    2,268
    Follows
    3
    Following
    0
    Mentioned
    37 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by asad12347 View Post
    Before the engine rebuild completely, i took suggestions from many people, all suggested to rebuild it and not go for the new bike (bht achi bni hoe h ap engine bnalo bht maza kry gi bike) now i understand the enjoyment. 3 weeks up still facing problems... ahh...
    Bhai mechanic to apsa zeyada muja bura lagta haien is leya ma kabhi gya hi nae mechanic ka pas ap khud carb khol ka dakh lo manually ka slide neecha touch hoti hai ka nae
    The first step towards knowledge is to know that WE are IGNORANT

  20. #39
    Senior PakWheeler Follow
    Hassan1991's Avatar
    Join Date
    Mar 2013
    Location
    Lahore
    Age
    20
    Posts
    2,268
    Follows
    3
    Following
    0
    Mentioned
    37 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Rebuilding is not a problem I personally change mien bike piston head many times I also have problems many problems when bike having point but always sort out my self whether brick it or set it
    The first step towards knowledge is to know that WE are IGNORANT

+ Reply to Thread
Page 2 of 2 FirstFirst 12

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •