Survey by Qualaroo
+ Reply to Thread
Results 1 to 11 of 11
Like Tree2Likes
  • 1 Post By Devastator
  • 1 Post By Devastator

Thread: clutch issue! Help Required!

  1. #1
    PakWheeler Follow
    Devastator's Avatar
    Join Date
    May 2009
    Location
    Riyadh
    Posts
    421
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default clutch issue! Help Required!

    Assalam Alaikum brothers, today while i was driving my Suzuki Liana like any random day, an unforeseen problem occurred, the clutch response started to become weak and the pedal became way softer then normal, it gradually became so serious that i practically couldn't shift gears and later pressing clutch pedal or not pressing seemed all the same , God knows how i brought my car back home, a manual car with a full time engaged clutch braking shuts car and to start it must start with an engaged F***ing clutch!

    all i know is that the clutch is not being able to disengage properly and thus rubber burning smell followed with squealing sound (similar to belt slipping but very short and low), now my query is regarding how this occurred out of no where, discussed the matter with mechanic on phone, he was relating the matter to clutch bearing, is there some problem in the hydraulic clutch wire or clutch bearing?

    i am really tensed and stressed as there are lots of important jobs left undone just because my car gave up on me, so experts and pros like @Xulfiqar please help, tomorrow i will tow the car all the way to a Suzuki authorized mechanic lately working elsewhere at a workshop, hope the issue wont be too big


  2. #2
    Senior PakWheeler Follow
    capsat's Avatar
    Join Date
    Apr 2006
    Location
    Select City
    Age
    10
    Posts
    12,597
    Follows
    31
    Following
    6
    Mentioned
    1019 Post(s)
    Tagged
    19 Thread(s)
    Problems Posted
    2
    Problems Solved
    5
    Best Answers
    3
    Good Answers
    6

    Default

    open up hood. check for hydraulic fluid in clutch cup if empty fill it start engine pump clutch few times see if there is any leakage smell on transmission side of engine bay and check on floor.

    most likely hydraulic fluid leaked from clutch line either cylinder side or the transmission side cylinder lining gave-in
    - www.crackwheels.com - A skilled Dictator is much more beneficial to Country......than a Democracy of Ignorant people

  3. #3
    Senior PakWheeler Follow
    capsat's Avatar
    Join Date
    Apr 2006
    Location
    Select City
    Age
    10
    Posts
    12,597
    Follows
    31
    Following
    6
    Mentioned
    1019 Post(s)
    Tagged
    19 Thread(s)
    Problems Posted
    2
    Problems Solved
    5
    Best Answers
    3
    Good Answers
    6

    Default

    Devastator hope there is no devastation with the car update your condition. Please!
    - www.crackwheels.com - A skilled Dictator is much more beneficial to Country......than a Democracy of Ignorant people

  4. #4
    PakWheeler Follow
    Devastator's Avatar
    Join Date
    May 2009
    Location
    Riyadh
    Posts
    421
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by capsat View Post
    Devastator hope there is no devastation with the car update your condition. Please!
    Alhamdulillah no devastating situation now, got busy getting the job done using genuine parts at cheap rates, 3s people would have ripped me with usual unsatisfied diagnoses of problem, so alhamdulillah contacted an ol friend who worked 3s suzuki before and lately working at pak suzuki factory.

    on professional diagnosis found out that thrust bearing gave up resulting in burning the plates, got all brand new genuine parts by personally and frequently visiting plaza got (clutch/pressure plates, thrust bearing, fly wheel bearing) installed, later found out that the gear wires were also weak so got em replaced and fixed, and while i was at it got brake shoes and pads replaced as well, one last thingi, clutch pedal is soooo soft that one really cant feel even if its there or not so will get the clutch kit replaced as well, i.e. washers in Master cylinder!

    Alhamdulillah the car drives like a dream now, better then ever, definitely that new clutch has given me few more horses to play with!

  5. #5
    PakWheeler Follow
    Devastator's Avatar
    Join Date
    May 2009
    Location
    Riyadh
    Posts
    421
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    one thing i assure you, if it wasn't for this guy and me personally getting my @$$ beaten by running here and there, suzuki 3s would have definitely turned this job to triple or at least double the amount of what it costed me at the moment! thank God for helping me and granting me good PR!

  6. #6
    Senior PakWheeler Follow
    capsat's Avatar
    Join Date
    Apr 2006
    Location
    Select City
    Age
    10
    Posts
    12,597
    Follows
    31
    Following
    6
    Mentioned
    1019 Post(s)
    Tagged
    19 Thread(s)
    Problems Posted
    2
    Problems Solved
    5
    Best Answers
    3
    Good Answers
    6

    Default

    Please share the cost of parts & labor for other fellow members' getting an idea for work total job cost. Thank you
    - www.crackwheels.com - A skilled Dictator is much more beneficial to Country......than a Democracy of Ignorant people

  7. #7
    PakWheeler Follow
    Devastator's Avatar
    Join Date
    May 2009
    Location
    Riyadh
    Posts
    421
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    labour was dirt cheap like 2000 RS for all the jobs my dear friend did so i paid 3000!
    rest of the stuff clutch/pressure plates, bearings, fly wheel adjustment, brake pads, and stuff costed close 10k RS, the parts were not that expensive as i imagined!
    total cost can be concluded at 15k as i got other petty stuffs and fluids replaced too!

    pardon me for writing a note as am too busy atm to look for invoices for appropriate prices!
    if any co-owner of Liana requires guidance i am ever ready to help,assists and guide!

  8. #8
    PakWheeler Follow
    abbas.hassan's Avatar
    Join Date
    Mar 2014
    Posts
    5
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Devastator Bro

    My Liana is having some issues. It seems there is no power in the engine. I have to drive it with a heavy foot. It goes to 80 km/hr tops where as it used to hit 100km/hr on ease. A friend said get the pressure plate and clutch plate replaced. Another has said the leads are short. Please help me

  9. #9
    Newbie Follow
    shoaib.mehmood's Avatar
    Join Date
    Apr 2014
    Posts
    1
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Hi Devastator. I am facing a hard clutch issue. Can you provide contact information of your friend who did the job for you? Thanks in advance.

  10. #10
    PakWheeler Follow
    kaleem42's Avatar
    Join Date
    Feb 2014
    Posts
    22
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    hello devastor. new on pak wheels..although a great fan on this threads..please help me regarding the clutch issue..i need to get it fixed of my liana..got it few days back.the clutch is so hard to press.please I would like to know the contact info of ur friend so that I can show my car to him.also if some gud mechanic in khi.. I need to get my head gasket replaced as well..lukin forward for ur reply soon..in trouble

  11. #11
    PakWheeler Follow
    kaleem42's Avatar
    Join Date
    Feb 2014
    Posts
    22
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default hard clutch issue

    hello devastor.please can u give the info of the person whom, did work on ur car as I'm facing the same issue in my liana..regards

  12. 08-05-2014, 08:50 AM

    PakWheeler


+ Reply to Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •