Survey by Qualaroo
+ Reply to Thread
Results 1 to 3 of 3

Thread: Help required regarding Liana

  1. #1
    Senior PakWheeler Follow
    cracked's Avatar
    Join Date
    Mar 2009
    Location
    Rawalpindi
    Age
    28
    Posts
    2,963
    Follows
    0
    Following
    0
    Mentioned
    35 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default Help required regarding Liana

    ok so i have few queries to ask, but let me give a little background information. my liana was having problem of missing on 2nd gear and a littlw knocking on 3200 to 3400 rpm. below and above that it was ok. and knocking was more on 3rd gear and above. AC would make the knocking more audible. so firstly i cleaned the EGR valve. and when i was taking egr valve off, i broke the temperature gauge sensor and consequently had to buy a qabli for 400. egr valve was almost clean but still cleaned it up with carb cleaner. no improvement was found in car. so went to a mechanic, asked him to tune the car. placed new spark plugs(old one were in good shape too but still ) ngk brand. mechanic cleaned the throttle body by taking it off. cleaned the injectors rail and injectors. cleaned the IAC valve. after that tuning the missing on 2nd gear is totally gone. knocking is still there as it is. but after this tunning the car idle rpm was staying quite high, around 1300. resetting the ecu didnt do anything better. so went back to him and he adjusted it with a screw on TB and now idle rpm stays around 800.
    ok so now the questions.
    1) is there any way to check if egr valve is working? i asked mechanic to check with obd scanner but he said if egr wasnt working, check engine light will turn on. btw while cleaning egr valve, it would rattle a little upon shaking so i guess it is in working condition right?
    2) what is causing knocking? he said bad fuel. ive got shims checked from another mechanic and he said shims are OK.
    3) idle rpm is controlled by IAC. so by adjusting screw, he adjusted IAC?
    4) when i first start my car on the morning, the car idle rpm stays around 1500, then drops to 1200 within seconds but then stays at 1200 for the time till temperature gauge reaches half mark. my question is shouldnt it start to maintain 800 with 2 3 mins? car has t stat installed .

    please experts, help out!
    PS: thanks for taking all the time for reading(if youve read all though :p)

    REAL men drive manual cars!

  2. #2
    Senior PakWheeler Follow
    cracked's Avatar
    Join Date
    Mar 2009
    Location
    Rawalpindi
    Age
    28
    Posts
    2,963
    Follows
    0
    Following
    0
    Mentioned
    35 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Anyone?

  3. #3
    PakWheeler Follow
    mblue12's Avatar
    Join Date
    Jul 2011
    Location
    Taxila
    Posts
    19
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    aoa dear bro,

    liana auto chock sensor is maybe bad but it usually with me also when i start my car in morning but when i change the complete wiring the issue is gone and second it is necessary you go for odi total check up

+ Reply to Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •