Update: CNG Installed
What installed is and from whom
Amir Razaq; Son of Mr Razaq.
Islamabad CNG, opposite Water distribution pump G10/4
03009777671
1- EKC 40 W/L cylinder, Fresh Faber is not available in market.
2- Orignal Landi Renzo Kit & 096M switch; all parts were as per catalog from LR.
3- Original Made in Italy LR25 Emulator; LR27 from Barzil was also available but i opted for LR25 (mulator changes to Tomosetto Lavato 4 Chip very next day of installation).
4- Orignal STAP600 is an option and will be installed later as per requirement, it's not readily available at Islamabad and will be ordered accordingly.
5- Lambda Control System is again an option and will get installed as per requirement and response of vehicle.
6- Millage will be checked in coming week and shared accordingly.
Now for cost hhhmmm hhhhmmmm
EKC=15300
Kit= 14000
Emulator=4500, change emulator next day and price changed to 5000
Installation=4000
Cylinder Stand= 1300
Venturi =800; and its the most interesting things as i don't need to block air as venturi is installed in the pipe not between pipe and engine
Earlier post: Hi All,
I am planning to Install CNG in my Swift from Al-Razaq CNG G-10, @ coming weekend
Any one having good experience or any suggestion for me please do share.
Some of senior pak-wheelrz have good experience with Al-Razaq they are helpful already but further comments can make me more conscious during installation.
Ocean