Survey by Qualaroo
+ Reply to Thread
Page 76 of 125 FirstFirst ... 2666747576777886 ... LastLast
Results 1,501 to 1,520 of 2484
Like Tree346Likes

Thread: Mehran Experience Tips and suggestions

  1. #1
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,928
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Cool Mehran Experience Tips and suggestions

    AOA
    i have owned mehran for 7 years almost and most of the stuff has gone wrong so if some one has an issue with mehran he can ask me here i will be glad to help a mehran brother to put him out of this misery as mehran is a car that can make u go mad and pull ur hair a part KIDDING
    so some one has problem post it here i will do my best to come up with a solution
    Problem no 1: Starting in winters is a hell if ur getting late dhicka will do the trick but u need to check few things Park the car in night on petrol,Open the Self as mechs call it SULF and check barrings in it they are copper barrings and if needed so replace them else ask the electrification to clean the self,and reinstall it
    then check the battery DON'T add water over the High level mark as in winters problems is that Engine OIl freezes or gets thick and it needs extra kick from the battery
    other things related are clean the plugs and change the plug wires possible to 8mm ones and clean or replace the Point which comes in Distributor
    also check the
    +ve wire of the self is Tight to battery as most of the time its a small thing which makes u go mad

    PRoblem no 2
    :
    Axel and CV joints so CV joints are too weak in mehran and 3 years of rough driving can kill them and when replacing CV joints never go for a kabuli AXEL as they tend to be repaired most of them use Chinese ones they work good and tell the Kharaiya to never temper with the length of the Axel in fitting of the Cv joints the length should be as OEM specs
    and if the Straight joint is worn out replace it with Cross and the Cross kupa but be careful for length and the kuppa pick the kuppa which has the smoothest end which goes in to the Gearbox as it can damage Axel seals in gear box
    always use the Original Rod of ur car as its build for ur car a mechanic will suggest u to replace whole AXEL with Kabuli but its from an older model besides most of them are repaired
    Issue in top speed and pick
    when i first got the chance to Floor mehran on M1 with iridium plugs and 8mm wires bought from Shoba i was really Disappointed with results car was hitting 110km/h MAX on petrol i was so mad but in this i noticed a few things which were wrong in my car
    1 Cv joint of right axel
    2 Cylinder Packing it made dar dar sound like old taxies after 80Km/h mark
    3 and wires from shoba had no life in them they were used and abuses
    so excpet for CV joint i changed wires to new 8mm which are cheaper then shoba wali Kabuli wires and Cylinder Packing plus whole exhaust had wholes so repaired it all got her tuned from ENERCON center and after a few days i hit the M1 again plus similar iridiums were in it and this time results were amazing mehran ha 165/70/12 tires and speedo was showing 130 so u can guess what it was in real speed as big tires cause speedo to give an error 100 in speedo = 112.2 Km/h in real

    Ignition Coil replacement


    as most of mehrans have OIL ignition coil which Comes FF and it sucks it has a limited life and mechs do make a mistake when coil dies they assume that head gasket is gone and which leads to other problems.replace coil with magnetic coil which Alto and Cultus use its way better and gives an edge in starting costs were low when i did this 600 for the coil brand new but now i herd its for 1500 or something comes in a triangle box.

    Front Guarder o
    r GADRI

    as time passes Front Guarder or GADRI become rusted and weak which causes problems for mountings of the front jumping rod a new Front Guarder or GADRI is about 1000 and 4 bolts hold it in place on a non accidented car its not a big job Front bumper needs to be opened and jumping rod and 4 bolts and its the reverse process while fitting but a car which had some accident then its a job in which a denter makes some $$$$ but there is always a way around intall gaudri and all stuff and see if there is some difference on alingment of bolts of front engine mounts cut a whole with welding torch in the engine mounting plate and its easy and also make adjustments to the jumping rod u can make tires placement in the wheels where they will fit but go for some good dentor so frame can be pulled out will cost more but its the right way
    installation of Foam in Doors to reduce sounds
    its a simple task install some pieces of foam behind the lock wires and door handle wires inside the door
    open the inner door covers first take the hadle out its held with 2 screws then take the cover of handle out held with single screw then the window winder take it out but it requires a trick rool it to a point u can see the joint end of the pit take it out with a screw driver and window winder will be free
    then take the cover our its held with clips but don't put much pressure on them they can break after its out check all bolts and screws inside the doors if they are loose tight them and hit the door with ur fist so u can hear sounds now with other hand start detecting what wire is loose cut some foam and put it between the door and line
    by this u can reduce 90% of sounds in mehran
    Tire and rim size
    now we see many Kewl boys put 15s on a mehran but this little car never needs huge wheels
    best size for mehroo is 145/70/12 and 155/70/12 no other these two are best sizes


    Mehran Experience Tips and suggestions -414980

    Hanjiii Kaa Storeey Eehh !

  2. #1501
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,928
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by SamBurnout View Post
    Hello, i am unable to find old shape bumpers for mehran, i surveyed magazine line, all the shop owners were like you should place new shaped bumpers in ur car, u wont be able to find old shaped bumpers anywhere. The thing is that i want to keep my car completely original Can anyone suggest me any good place in karachi where i can get good quality old shape bumpers plus how much should i be paying for them ? thanks
    repair old shape ones u have
    or go to shershash
    old shape bumpers are hard to find
    but old shapre bumper are mazbooooot
    Hanjiii Kaa Storeey Eehh !

  3. #1502
    PakWheeler Follow
    jazibdon's Avatar
    Join Date
    Feb 2014
    Location
    Lahore
    Age
    24
    Posts
    498
    Follows
    0
    Following
    0
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Mehran story
    Attached Images Attached Images  

  4. #1503
    Senior PakWheeler Follow
    racer7's Avatar
    Join Date
    Oct 2012
    Location
    Lahore
    Posts
    1,578
    Follows
    5
    Following
    0
    Mentioned
    40 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by SamBurnout View Post
    Hello, i am unable to find old shape bumpers for mehran, i surveyed magazine line, all the shop owners were like you should place new shaped bumpers in ur car, u wont be able to find old shaped bumpers anywhere. The thing is that i want to keep my car completely original Can anyone suggest me any good place in karachi where i can get good quality old shape bumpers plus how much should i be paying for them ? thanks
    You can get it from me. The bumpers are original and in satisfactory condition. But I am from Lahore.

  5. #1504
    PakWheeler Follow
    shafiqb9's Avatar
    Join Date
    Sep 2014
    Location
    Islamabad
    Age
    30
    Posts
    11
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    1
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    My mehran making noise on left right turn.
    Earlier i replaced cv joints worked well for only 3 months and then again started giving noise. The boots were torn, replaced the boots but no effect. And now started making noise on straight drive too only left side one..
    What should i do?
    Replace the cv joints again?
    My mech told me that to replace this time the whole setup of excel.. i.e the cv joints end and the center rod etc...
    Kindly advice..
    Also tell me which brand is good?
    And from which shop i can get good quality in Peshawar?

  6. #1505
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,928
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by shafiqb9 View Post
    My mehran making noise on left right turn.
    Earlier i replaced cv joints worked well for only 3 months and then again started giving noise. The boots were torn, replaced the boots but no effect. And now started making noise on straight drive too only left side one..
    What should i do?
    Replace the cv joints again?
    My mech told me that to replace this time the whole setup of excel.. i.e the cv joints end and the center rod etc...
    Kindly advice..
    Also tell me which brand is good?
    And from which shop i can get good quality in Peshawar?
    Awal kho da axelo warrnty ba vi take the cv joints and recipit claim warranty and get the cv joints new as they come with warranty
    Also u will.be needing statright kuppa to be changed with cross and it wil cost 1200for both sides
    u can get new axels from . shoba and cost around 2300 to 3000 jis kisam ka qassai k haty aap chren u can get cv joints from.ravi autos
    And starigt kuppa kabili lagna ha

    Sent from my GT-I9300 using Tapatalk
    Hanjiii Kaa Storeey Eehh !

  7. #1506
    PakWheeler Follow
    shafiqb9's Avatar
    Join Date
    Sep 2014
    Location
    Islamabad
    Age
    30
    Posts
    11
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    1
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Thanks @ekdrifter
    Cv joints were chnged by previous owner (my friend) and they were i guess kabali.. So no warranty

    Little confusion i will need to change 4 things?

    1. Excel kabali
    2. Cv joints new
    3. Straight kupa new or kabali?
    4. Cross new or kqbali?

    Am i right?

  8. #1507
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,928
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by shafiqb9 View Post
    Thanks @ekdrifter
    Cv joints were chnged by previous owner (my friend) and they were i guess kabali.. So no warranty

    Little confusion i will need to change 4 things?

    1. Excel kabali
    2. Cv joints new
    3. Straight kupa new or kabali?
    4. Cross new or kqbali?

    Am i right?
    If u go for kabli axels then no need to chane any thing but make sure those kabli axels are staright and cv joints have grease and rubber boots are fine

    If u want to change cv joints and also staright kuppa too
    Cv joints 2100 new and the staright kupps is also 1200 1500 for both sides cross kuppa

    Btw I am hell tired but I think go for kabli axels it is less hectic



    Sent from my GT-I9300 using Tapatalk
    Hanjiii Kaa Storeey Eehh !

  9. #1508
    PakWheeler Follow
    haseebaw's Avatar
    Join Date
    Mar 2008
    Location
    Lahore
    Age
    34
    Posts
    170
    Follows
    0
    Following
    0
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    There is some oil leakage from the top of oil chamber or from the oil filter. it leakage starts after oil change. one drop dip after 30 seconds.
    please suggest what should i do? go to change the seal of oil chamber or to change the oil filter?????

  10. #1509
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,928
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by haseebaw View Post
    There is some oil leakage from the top of oil chamber or from the oil filter. it leakage starts after oil change. one drop dip after 30 seconds.
    please suggest what should i do? go to change the seal of oil chamber or to change the oil filter?????
    Get it checked may be if oil filter is loose or oil pan it done

    Sent from my GT-I9300 using Tapatalk
    Hanjiii Kaa Storeey Eehh !

  11. #1510
    PakWheeler Follow
    haseebaw's Avatar
    Join Date
    Mar 2008
    Location
    Lahore
    Age
    34
    Posts
    170
    Follows
    0
    Following
    0
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    ok, is there any other thing which should i do?

  12. #1511
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,928
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by haseebaw View Post
    ok, is there any other thing which should i do?
    Nop get it checked

    Sent from my GT-I9300 using Tapatalk
    Hanjiii Kaa Storeey Eehh !

  13. #1512
    PakWheeler Follow
    chamernazir's Avatar
    Join Date
    Nov 2013
    Location
    Lahore
    Age
    33
    Posts
    308
    Follows
    0
    Following
    0
    Mentioned
    19 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    can any body please elaborate that how to open the speedo meter of Mehran Euro 2. i have to install LED in its meter. can the speedometer light/bulbs be replaced with LED bulbs ?
    also it will be helpful if any one can guide if i can also change the cluster/panel lights to LED ?

  14. #1513
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,928
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    it is just four screws on the black part and take out the heating control knobs
    and then speedo has 4 screws undo them pull it out and disconnect the grip from the back
    get leds which are fitted in dim lights or parking lights get 4 to 6 on them and replace the bulbs
    easy peasy


    Quote Originally Posted by chamernazir View Post
    can any body please elaborate that how to open the speedo meter of Mehran Euro 2. i have to install LED in its meter. can the speedometer light/bulbs be replaced with LED bulbs ?
    also it will be helpful if any one can guide if i can also change the cluster/panel lights to LED ?
    Hanjiii Kaa Storeey Eehh !

  15. #1514
    PakWheeler Follow
    chamernazir's Avatar
    Join Date
    Nov 2013
    Location
    Lahore
    Age
    33
    Posts
    308
    Follows
    0
    Following
    0
    Mentioned
    19 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by ekdrifter View Post
    it is just four screws on the black part and take out the heating control knobs
    and then speedo has 4 screws undo them pull it out and disconnect the grip from the back
    get leds which are fitted in dim lights or parking lights get 4 to 6 on them and replace the bulbs
    easy peasy
    thank you for the reply

  16. #1515
    PakWheeler Follow
    ab6666's Avatar
    Join Date
    Nov 2013
    Location
    N/A
    Posts
    332
    Follows
    1
    Following
    0
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Play in khangi of mehran! How to solve it?

  17. #1516
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,928
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by ab6666 View Post
    Play in khangi of mehran! How to solve it?
    motlab ?
    khangi mechnical name
    Hanjiii Kaa Storeey Eehh !

  18. #1517
    PakWheeler Follow
    ab6666's Avatar
    Join Date
    Nov 2013
    Location
    N/A
    Posts
    332
    Follows
    1
    Following
    0
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Stering ka rod jo wheels ka sth joray hoty hain

  19. #1518
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,928
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by ab6666 View Post
    Stering ka rod jo wheels ka sth joray hoty hain
    Steering box

    Sent from my GT-I9300 using Tapatalk
    Hanjiii Kaa Storeey Eehh !

  20. #1519
    PakWheeler Follow
    malik94's Avatar
    Join Date
    May 2014
    Posts
    43
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Where is mehran's fuel filter located?

  21. #1520
    PakWheeler Follow
    burnoutrevenge's Avatar
    Join Date
    Mar 2012
    Location
    Karachi
    Posts
    193
    Follows
    0
    Following
    0
    Mentioned
    10 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by malik94 View Post
    Where is mehran's fuel filter located?
    I think it is under the car near the rear left wheel. U will see a small dibbi. That's the fuel filter.

+ Reply to Thread
Page 76 of 125 FirstFirst ... 2666747576777886 ... LastLast

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •