brothers i want to know can I make these type of connections?if we match all the outputs...?or are these connections gonna burn my subs...?
these are two dvc 4ohm subs on two 4 channel amplifiers...amplifiers of same power ( same brand, same model)
same type of wiring, same input...(from one rca splitted by Y splitter)
Dont ever try it. Its gonna burn your voice coils as soon as you will switch it on. Reason ? Its because the two voice coils have to move in sync. If they move in same direction then they will be in contact with each other and hence short circuit. Some state of the art mono amps have a sync feature on them (Prs 2000spl). If the sub is of heavy wattage, two amps can team up together to power a DVC sub. Each amp connected with single voice coil and the sync feature is used. So that way the voice coils movement is synchronized as if you have connected it with same amp.
So therefore do not attempt this method without a dedicated amp which is supposed to perform this operation.
Better if u run both subs on a single 4ch amp provided the amp is powerful enough.
Doesn't he want to power 2 voice coils separately of 2 different channels?
I mean something like this
sir are't both coils sticked in such a way that they can never touch each other??
system alredy setted up like this
Actually they will not move in sync, wanna try it? Say them good bye first
Sir it is same like intake valves and exhaust valves sync due to cam If they go out of sync then u know you know this stuff better
Sent from my iPhone using Tapatalk
^^sir try he karna hota to thread he kuin banata...
got that what you explained...
sayin goodbye to this bad idea..thanks for the help sir