Log In
Efficiency Enhancer Additives-BST 40 (Diesel/Petrol)
Buy, Sell & Exchange
Car Parts
mansoor.khaliq
(mansoor.khaliq)
2014-05-18 18:07:40 +0500
#1
What is BST 40?
BST 40 is a fuel additive which does an auto tune-up, enhances the octane requirement of the fuel, improves the pickup/performance of your car, saves maintenance cost & fuel expense, preserves your engine life and most of all it is environmental friendly.
Why are Automakers making such engines which require Fuel Additives?
Automakers are making fuel efficient and low maintenance engines which consume less fuel and produce greater horsepower provided if they operate on Euro IV standards. Present form of transport fuel does not comply with the modern engine designs that require high quality of fuel with greater Octane / Cetane requirements by the engines to perform to the optimum. Compliance to Environmental Safety standards, automakers have to maintain the balance of efficiency, performance and health standards therefore any new equipment that is designed has to be Euro IV standard with low maintenance cost and high fuel efficiency.
What are the fuel standards available in Asia, especially in Pakistan?
Pakistan normally acquires Petrol with the Octane value less than 84 which is not suitable to be used in modern designed engines and high octane fuel is beyond ones affordability within this economic crisis. These modern technologies consist of delicate injection systems a replacement to carburetors, which perform better atomization of the fuel into fine mist which ignites easily in the combustion chamber.
What difference will a fuel additive make?
A good fuel additive will not only contain the Octane Enhancer also in addition it will have cleaning agents, tuning agents, long time fuel preservation agents and Euro IV complying agents. This is necessary to make your engine perform as per the manufacturer’s specifications and helps to attain maximum fuel efficiency with almost zero maintenance costs.
How can I achieve Savings?
If you roughly calculate the engine maintenance costs over 6 months with expensive engine part replacement vis-a-viz fuel cost; it turns out to be in thousands as compared to total cost on additive purchases.
What harm will occur to my Engine with Fuel Additives?
Your engine is made up of alloys and synthetic polymers. Anything that is acidic of in-organic in nature may corrode the engine inner lining resulting into enormous engine inefficiency. All those additives that contain alcohols and ethers have the tendency to make water in fuel. Water may result into rusting of parts and early wearing out of precociously calibrated injectors, pumps and breathers. Similarly certain other additives may contain particle matter in them which may clog the filters and fuel outlets holes with in the engine.
How BST 40 gives fuel saving?
BST 40 additive ensure 100% combustion which is the hallmark of any engine operation and all other outcomes are interwoven with it. Rare earth elements enter the combustion chamber in very small size (not visible through the naked eye) and uniformly spread at the far areas of the combustion chamber. At the occurrence of the combustion it uniformly conducts the radiant energy across the area resulting into complete combustion.
When mixed with the base fuel in the fuel tank it gradually cleans the already present carbon deposits and impurities present in the fuel and do not allow them to sediment in the fuel system instead burn them out through the exhaust pipe leaving the engine as new.
Detergent/Cleaning Agents enables the engine to operate conveniently to its optimum without over burdening the pump, injectors or friction between the moving parts; polishing them with a preventive coating to further reduce wear n tear inside the engine. This agent is also responsible for Auto tune-up of the engine, which considerably reduces the fuel consumption & ensures optimum engine operation.
Octane/Cetane improvers increase the power output of the same engine, enable it to operate even in the lower ratio gears. As per the law of mechanics gearing ratio is inversely proportional to the fuel consumption, high ratio results in low fuel consumptions and vise versa.
Auto-tuneup, power enhancement, engine preservation and 100% combustion results into saving of time, fuel, spare part, frequent repairs/maintenance and breakdown costs.
Podcast
Articles