Hi Guys.
I own a suzuki every with K6A 660cc engine for the last 2 and half years. It was working perfectly fine uptil now. I do change engine oil after every 4000 KM and using Havoline formula 10w 30. The odo reading is around 124000 Km. Its genuine mileage because i imported the car myself in 2013 and i have driven around 50,000 km uptil now.
Now the problem i am facing is car is giving bluish/whitish smoke in early morning or when i park it for 5 to 6 hours and the duration of the smoke is 10 to 12 seconds. When i noticed the smoke i started checking oil level regularly and noticed it is also reducing oil a bit. After 3100 km of drive the oil level reached between the two dots and when i filled it was close to the top dot of dipstick.
Now the problem which i diagnosed myself is leakage of valve seals. Valve seals are leaking the oil into combustion when i park the car for longer intervals.
Now the biggest problem is to find a mechanic who can change the valve seals without removing the head. I know when i will go to Ustaad he will say to me change your ring and phiston or change the whole of engine from Bilal Gunj.
Now my first question is there any mechanic who can do the job properly in Lahore? I am ready to spent few extra bucks if someone does the job properly.
Is there any shop where i can find the valve seals of K6A engine? Since most of the kei cars are having K6A engine. Or i have to try my luck in bilal gunj?
Should i leave the problem as it is and keep a check on oil level?
Should i use the higher viscosity oil or oil additives like liqui moly oil smoke or stp products?
@ser_gtr @xulfiqar @syncview @capsat @all