Survey by Qualaroo
+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 20 of 24
Like Tree1Likes

Thread: Toyota passo 2007 Keyless Entry/ Ignition Bizarre Issue. Help Requested.

  1. #1
    PakWheeler Follow
    gmasood's Avatar
    Join Date
    Aug 2008
    Location
    Lahore
    Age
    44
    Posts
    12
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default Toyota passo 2007 Keyless Entry/ Ignition Bizarre Issue. Help Requested.

    AOA!

    I recently purchased a second hand Toyota Passo 2007. It is equipped with a Keyless entry and Keyless Ignition System. The only key that i got is the Fob which has a slit where the small mechanical key goes inside a sleeve.
    The problem is this that I can open the Driver Side Door when every the Smart Key is in my pocket by pressing on the small button on the Driver Side Handle but once I get inside the Vehicle i cannot start the Car as the ignition would not turnl
    My solution is to remove the mechanical key from the Smart Transponder Sleeve, insert it in the ignition, touch the base of the Transponder close to the ignition area and then turn the ignition at which point the car would start.
    Now this process is a total painful and long one. I have tried replacing the batteris of the Smart Key but to no avail.
    I am confused that if the Car is recognizing the transponder to unlock the doors, why is it not recognizing it when inside to let the vehicle start without the small mechanical key.
    Please help and advise. Also if you think that my Key is to blame then let me know where i can have a duplicate one made and what cost? Or do you think that the ECU RFID antenna inside the car is to blame as it doesnt detect the Transponder inside the Car.

    many thanks for your help.

  2. #2
    Senior PakWheeler Follow
    us000's Avatar
    Join Date
    Aug 2006
    Location
    Islamabad
    Age
    28
    Posts
    1,519
    Follows
    4
    Following
    0
    Mentioned
    73 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    1
    Best Answers
    1
    Good Answers
    1

    Default

    as per user manual, the antenna is located between front seats, the area of typical cars hand brake.
    you can check, maybe the cable of that antenna is not properly connected or broken,

    this maybe the reason, but i m not sure
    jiyo aur jeenay do

  3. #3
    PakWheeler Follow
    CutePoison's Avatar
    Join Date
    Nov 2010
    Location
    Lahore
    Posts
    855
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Sounds like weak remote battery

  4. #4
    Senior PakWheeler Follow
    Marschall's Avatar
    Join Date
    Aug 2009
    Location
    Chowha saidan shah
    Age
    31
    Posts
    1,145
    Follows
    0
    Following
    0
    Mentioned
    24 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    key would cost you around 25k ,when inside ur vehicle do u see a small red light blinking on the key when you press the ignition button? have u replaced correct battery with the same volts
    "Stand by your glasses steady and drink to your comrade's eyes.
    Here's a toast to the dead already and hurrah for the next to die."

  5. #5
    PakWheeler Follow
    Engineer1's Avatar
    Join Date
    Dec 2009
    Location
    Islamabad
    Age
    32
    Posts
    640
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Dear. I faced the same issue with my Passo last year. Solution is simple. No need of 25k remote, just replace the cell of the remote for 250pkr. It will work for sure.:thumbup:

    Sent from my GT-I9105 using PW Forums mobile app
    Drive Hard or stay Home............

  6. #6
    PakWheeler Follow
    Cr33D's Avatar
    Join Date
    Nov 2012
    Location
    Rawalpindi
    Age
    21
    Posts
    585
    Follows
    0
    Following
    0
    Mentioned
    15 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Just replace the cell.
    When I looked up "Ninjas" in Thesaurus.com, it said "Ninja's can't be found" Well played Ninjas, well played.

  7. #7
    PakWheeler Follow
    gmasood's Avatar
    Join Date
    Aug 2008
    Location
    Lahore
    Age
    44
    Posts
    12
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by us000 View Post
    as per user manual, the antenna is located between front seats, the area of typical cars hand brake.
    you can check, maybe the cable of that antenna is not properly connected or broken,

    this maybe the reason, but i m not sure
    Well it is the Sofa Seat Style one. I guess I would have to remove the seat and the carpetting to get to the antenna or is there a better way to get to it. I also dont know what the thing looks like.

  8. #8
    PakWheeler Follow
    gmasood's Avatar
    Join Date
    Aug 2008
    Location
    Lahore
    Age
    44
    Posts
    12
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Marschall View Post
    key would cost you around 25k ,when inside ur vehicle do u see a small red light blinking on the key when you press the ignition button? have u replaced correct battery with the same volts
    Yes when inside I see the small red light of immobiliser blinking. When I press the ignition to turn it it starts to blink at twice the speed.
    Do you think it is weak battery but if the battery is weak how is it working outsdide the car where i can perform keyless entry but not keyless ignition

  9. #9
    PakWheeler Follow
    gmasood's Avatar
    Join Date
    Aug 2008
    Location
    Lahore
    Age
    44
    Posts
    12
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Engineer1 View Post
    Dear. I faced the same issue with my Passo last year. Solution is simple. No need of 25k remote, just replace the cell of the remote for 250pkr. It will work for sure.:thumbup:

    Sent from my GT-I9105 using PW Forums mobile app
    I just replaced the cell last night. It is CR2032 with correct voltage but the problem remains. The mystery is that if it is weak cell how can i lock and unlock the car with the SmartKey and perform Keyless Entry. The issue is only with Keyless Ignition where the immoboliser light would continue to blink when i am inside the vehicle and i have to perform the emergency start sequence which i mentioned in my post below.

  10. #10
    PakWheeler Follow
    gmasood's Avatar
    Join Date
    Aug 2008
    Location
    Lahore
    Age
    44
    Posts
    12
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Engineer1 View Post
    Dear. I faced the same issue with my Passo last year. Solution is simple. No need of 25k remote, just replace the cell of the remote for 250pkr. It will work for sure.:thumbup:

    Sent from my GT-I9105 using PW Forums mobile app
    I have replaced the Cell a couple of times but to no avail. The mystery is that if it is weak cell how can i lock and unlock the car with the SmartKey and perform Keyless Entry. The issue is only with Keyless Ignition where the immoboliser light would continue to blink when i am inside the vehicle and i have to perform the emergency start sequence which i mentioned in my post above.

  11. #11
    PakWheeler Follow
    gmasood's Avatar
    Join Date
    Aug 2008
    Location
    Lahore
    Age
    44
    Posts
    12
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by CutePoison View Post
    Sounds like weak remote battery
    Changed reomote battery couple of times (CR2032) but to no avail. the remote works fine outside the car to lock unlock from distance, perform keyless entry but is not recognized for keyless ignition. Any help/suggestion would be great.

  12. #12
    Senior PakWheeler Follow
    Marschall's Avatar
    Join Date
    Aug 2009
    Location
    Chowha saidan shah
    Age
    31
    Posts
    1,145
    Follows
    0
    Following
    0
    Mentioned
    24 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    ok as per my experience opening a veh requires less power my car did the same thing it would open but not start, maybe the replacement of cell has caused some malfunction, have u checked international forums.I read the manual on passo they have keyless ignition not working chapter do u have the manual?
    "Stand by your glasses steady and drink to your comrade's eyes.
    Here's a toast to the dead already and hurrah for the next to die."

  13. #13
    PakWheeler Follow
    gmasood's Avatar
    Join Date
    Aug 2008
    Location
    Lahore
    Age
    44
    Posts
    12
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Thanks for the reply. Can you email me the manual please @ gmasood@gmail.com. I have tried some onlione translation of jaspnese and it suggests the method i am using for starting car. Can you also tell me the battery model no and where to get the original one from lhr or isb. I checked my current newly installed battery using violtmeter and it was showing 3 volts as it should be but still ecu is not detecting the key inside.

  14. #14
    Senior PakWheeler Follow
    Marschall's Avatar
    Join Date
    Aug 2009
    Location
    Chowha saidan shah
    Age
    31
    Posts
    1,145
    Follows
    0
    Following
    0
    Mentioned
    24 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by gmasood View Post
    Thanks for the reply. Can you email me the manual please @ gmasood@gmail.com. I have tried some onlione translation of jaspnese and it suggests the method i am using for starting car. Can you also tell me the battery model no and where to get the original one from lhr or isb. I checked my current newly installed battery using violtmeter and it was showing 3 volts as it should be but still ecu is not detecting the key inside.
    i got maxell cell and i have mailed u
    "Stand by your glasses steady and drink to your comrade's eyes.
    Here's a toast to the dead already and hurrah for the next to die."

  15. #15
    PakWheeler Follow
    gmasood's Avatar
    Join Date
    Aug 2008
    Location
    Lahore
    Age
    44
    Posts
    12
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Many thanks for the manual. I posted on international forums and they told me that the Smart Key/Fob has two parts, one for unlocking the door and the second for verification of the immobilizer/ECU. It might be that the later part is broken or is out of Synch from the Immobolizer. Can you point me out in the direction as to whom to contact for a spare key/Fob in lahore or Islambad and how much it would cost?

  16. #16
    Senior PakWheeler Follow
    levin's Avatar
    Join Date
    Oct 2005
    Location
    Select City
    Age
    51
    Posts
    23,112
    Follows
    5
    Following
    0
    Mentioned
    95 Post(s)
    Tagged
    6 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    and im sure you paid more than 1 million. sad . these cars need to come down below 1M with all the odd problems people facing.
    ,,, unless you know the track, you're not good enough to sit behind the wheel." K T

  17. #17
    PakWheeler Follow
    Engineer1's Avatar
    Join Date
    Dec 2009
    Location
    Islamabad
    Age
    32
    Posts
    640
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Dear, in Islamabad i may help you replace the cell from same place where i changed mine. There is one watch outlet in front of ILLUSSION's Jinnah Super. Just take it to him nd ask him to replace the cell. It worked for me.

    Sent from my GT-I9105 using PW Forums mobile app
    Drive Hard or stay Home............

  18. #18
    PakWheeler Follow
    denyhazrin's Avatar
    Join Date
    Oct 2013
    Age
    35
    Posts
    7
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Toyota passo 2007 Keyless Entry/ Ignition Bizarre Issue. Help Requested. - 8ehu7ymu mine remote lost..so i buy another passo remote...how to program it? Tq

    Sent from my Nexus 4 using Tapatalk now Free

  19. #19
    Senior PakWheeler Follow
    bilalzubairy's Avatar
    Join Date
    Oct 2008
    Location
    Lahore
    Age
    31
    Posts
    1,581
    Follows
    1
    Following
    0
    Mentioned
    4 Post(s)
    Tagged
    2 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    can anyone share Toyota Passo manual at bilal.zubairy@gmail.com will be very thankful to you all.

    My car also stopped responding to the remote now have to open the car using the key inside the remote if anyone has found any solution to this problem will be great to hear from him.

  20. #20
    Senior PakWheeler Follow
    bilalzubairy's Avatar
    Join Date
    Oct 2008
    Location
    Lahore
    Age
    31
    Posts
    1,581
    Follows
    1
    Following
    0
    Mentioned
    4 Post(s)
    Tagged
    2 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    @gmasood

    were you able to find any solution to your problem ???

+ Reply to Thread
Page 1 of 2 12 LastLast

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •