Looks like these are back of engine block because on front it has injectors and that I have to remove air filter housing to get to plugs. Kindly confirm. Thanks.
AG
Any one?
its below blk cover .... remove the 8mm bolts and plugs will be there.
I unscrewed one of these but then put it back. I thought these were fuel injectors. The reason being that cable/wires attached looks thin for a plug wire.
just unscrew and pull it gently and you will see them
unscrew them, disconnect those cables, can be pulled easily as they are attached through a grip, pull out these ignition coil and u'll get plugs under them...... Cheers