Survey by Qualaroo
+ Reply to Thread
Page 2 of 4 FirstFirst 1234 LastLast
Results 21 to 40 of 65
Like Tree40Likes

Thread: SUZUKI GS150 LS430 HID PROJECTOR RETROFIT:@keiworks12

  1. #1
    PakWheeler Follow
    ahsan95's Avatar
    Join Date
    Aug 2012
    Location
    Karachi
    Posts
    996
    Follows
    0
    Following
    0
    Mentioned
    46 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default SUZUKI GS150 LS430 HID PROJECTOR RETROFIT:@keiworks12

    Aoa dear Pakwheelers.

    For quite some time I had been inspired by the output, throw, cut off, focus of hid projectors.
    Previously , I had a very bad experience with @LEDLIGHTMAKERZ in terms of honesty and truth.

    I send Tanzeel @LEDLIGHTMAKERZ the stock headlight of my bike to be retrofitted into projector headlight.

    It was his first retrofit of projector in GS 150.
    He overcharged me quite a lot and conveyed wrong information regarding the retrofit.
    First of all, he said that the projector can be retrofitted in stock headlight. I asked him about the cost and transferred amount of all parts and labour.

    But then he calls me and says sir, ye headlight ka glass nhi nikal sakta. Aur agar nikalo GA tou toot jae GA.
    So this meant new headlight had to be purchased and I had to pay for that too.

    Clearly, this shows he hadn't done retrofit on SUZUKI GS150 before. He experimented on my light and I had to pay more. Had he done the retrofit before, he would have known about this and would have informed before hand.
    I will talk about this later in this topic as I need to cover everything in sequence.

    Generally most of us think that we can just place hid in projector and we're good to go. I also had same thoughts but now I learned it the hard way.
    However, this is not the case..
    There are two types of projectors.
    Halogen and hid.

    Halogen projectors require halogen bulbs like h3.
    Whereas hid projectors requires hid bulbs like d2s etc.

    This guy basically installed a halogen projector . I am 100 percent sure about that .
    He said it's Cygnus hid projector but according to the guy who did my recent retrofit @KeiWorks12 it's 100pc not Cygnus projector.

    Ledlightmakerz told me that for best results get h3 hid bulb. He should have never said that but should have informed me not to use hid in the projector he gave me.
    Even if light visibility is fine he should have not advised using hid in halogen projector as it can fade away the reflector bowl inside halogen projector.

    I will not refer this guy to anybody now. He is not honest in the field. His words can't be trusted. Don't know how many people have been ripped off by this person.
    He takes advantage of people who come to him as people have limited knowledge about difference in projector.

    I am really disappointed. I tried not to post anything regarding this for quite sometime but at last had to inform others so they may realize what other person has experienced and try to stay on safe side rather than getting ripped off.


    So now, here I am sharing new retrofit done by @KeiWorks12.

    Asked him to retrofit my light. He gave me full information regarding projectors difference of projector like hid and halogen. Types of bulb that fits.


    Previously I had mentioned that Ledlightmakerz said that new headlight had to be purchased in order to get retrofit as glass will break if separated. He was all wrong. @KeiWorks12 retrofitted in stock light. No need to change it . and the glass came off very easily in matter of seconds.


    Here are details.

    Lexus LS430 OEM HID projector with color modding.
    Mitsubishi OEM D2S HID ballast.
    Philips Germany D2S 6000k bulb
    Devil eye


    I am totally in love with the light. It's visibility, cut off focus all are above my expectations.

    Though there's a difference between halogen projector output and hid projector output with hid being the better one I will not say that the halogen projector which I previously had was bad. Once it is fitted with the right size halogen bulb it will do it's job just fine.


    -Lexus hid projector= Famous for super wide beam and awesome output,focus and cutoff
    -OEM bulb =genuine philips oem d2s made in Germany
    -Mitsubishi OEM ballast =instant warm up time, waterproof high quality 35w ballast. Miles greater than Chinese ballasts.

    Now price difference :
    @KeiWorks12
    Hid projector retrofit (total) =10k
    Break up
    -Projector(hid) Lexus LS430 OEM =4k
    -Bulb oem philips =2k
    -Ballasts oem Mitsubishi =4k
    -Time =2days @LEDLIGHTMAKERZ
    Halogen projector retrofit (total) =8.2k
    Break up
    -Projector (halogen) (can't say anything about brand)(definitely not Cygnus) =4k (overcharged)
    -Bulb (h3 for best results according to him)(bought separately but still it's a part) =600
    -Neon ccfl ring =1.5k
    -New headlight =600
    -Labour=1k
    -Shipping =500+
    Time=2 weeks

    Though I paid more for hid projector retrofit, I don't regret my decision as I was fully informed with pics of what I was going to get. I had peace of mind and @KeiWorks12 did his best to retrofit the light in just 2 days.


    At last, I would say that I don't have any personal enmity with @LEDLIGHTMAKERZ nor do I have any intention to hurt his business, but to make him realize that please don't play with others. Don't take advantage of people just be cause they don't have much idea/knowledge in that field.

    I tried to message you on whatsaap but u never replied back even after multiple multiple tries.
    So this created doubt in my mind. I could have bombarded this thing on your wall but I don't feel good to hurt someone's business.

    Just needed to make the public aware.

    So guys, really appreciate your time here. Enjoy the pics.















    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2
    Attached Images Attached Images          

  2. #21
    PakWheeler Follow
    ahsan95's Avatar
    Join Date
    Aug 2012
    Location
    Karachi
    Posts
    996
    Follows
    0
    Following
    0
    Mentioned
    46 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by kamranhakro1 View Post
    @ahsan95

    Your ride must be standing apart when this light is lit at night.

    Mind sharing photo of head light, as to see how it looks when switched off.
    Yup will share that tom inSha Allah

    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2

  3. #22
    PakWheeler Follow
    kamranhakro1's Avatar
    Join Date
    Sep 2014
    Location
    Karachi
    Posts
    59
    Follows
    0
    Following
    0
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Does result of your HID setup is similar to this one?
    Attached Images Attached Images  

  4. #23
    PakWheeler Follow
    ahsan95's Avatar
    Join Date
    Aug 2012
    Location
    Karachi
    Posts
    996
    Follows
    0
    Following
    0
    Mentioned
    46 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by kamranhakro1 View Post
    Does result of your HID setup is similar to this one?
    Yes looks similar.

    Share details.

    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2

  5. #24
    Senior PakWheeler Follow
    JustFarooq's Avatar
    Join Date
    Apr 2006
    Location
    Faisalabad
    Age
    33
    Posts
    1,037
    Follows
    0
    Following
    0
    Mentioned
    29 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    What about battery backup.?
    ALLAH U MMA SALLE ALAA MUHAMMADIN WA BAARIQ WASALLAM

  6. #25
    PakWheeler Follow
    ahsan95's Avatar
    Join Date
    Aug 2012
    Location
    Karachi
    Posts
    996
    Follows
    0
    Following
    0
    Mentioned
    46 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by JustFarooq View Post
    What about battery backup.?
    Sir, projector doesn't affect battery.
    It's just a housing for hid.

    35w hid ballast is installed.

    My daily running is around 30km with 5km night time riding so battery isn't giving any issue.

    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2

  7. #26
    PakWheeler Follow
    rizwan4340's Avatar
    Join Date
    Sep 2014
    Age
    26
    Posts
    507
    Follows
    2
    Following
    0
    Mentioned
    6 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by ahsan95 View Post
    Sir, projector doesn't affect battery.
    It's just a housing for hid.

    35w hid ballast is installed.

    My daily running is around 30km with 5km night time riding so battery isn't giving any issue.

    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2
    Nice output. Ahsan bhai can you please share the result of light on black road in night. I want to see how it looks on road. And if possible the on road in street lights too
    It is Easy to hate But Love is More Powerful...

  8. #27
    PakWheeler Follow
    ahsan95's Avatar
    Join Date
    Aug 2012
    Location
    Karachi
    Posts
    996
    Follows
    0
    Following
    0
    Mentioned
    46 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by rizwan4340 View Post
    Nice output. Ahsan bhai can you please share the result of light on black road in night. I want to see how it looks on road. And if possible the on road in street lights too
    Sure bro will do that.


    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2

  9. #28
    Senior PakWheeler Follow
    JustFarooq's Avatar
    Join Date
    Apr 2006
    Location
    Faisalabad
    Age
    33
    Posts
    1,037
    Follows
    0
    Following
    0
    Mentioned
    29 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Yes we are waiting for results
    ALLAH U MMA SALLE ALAA MUHAMMADIN WA BAARIQ WASALLAM

  10. #29
    PakWheeler Follow
    ahsan95's Avatar
    Join Date
    Aug 2012
    Location
    Karachi
    Posts
    996
    Follows
    0
    Following
    0
    Mentioned
    46 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by JustFarooq View Post
    Yes we are waiting for results
    Will do the testing tomorrow, as my bike is choking right now due to some blockage in carburettor. Will get it checked tomorrow and post results too at night

    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2

  11. #30
    PakWheeler Follow
    rizwan4340's Avatar
    Join Date
    Sep 2014
    Age
    26
    Posts
    507
    Follows
    2
    Following
    0
    Mentioned
    6 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by ahsan95 View Post
    Sure bro will do that.


    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2
    Shukran habibi. Actually my bike result on off side tracks and in streets it's awesome but on black carpeted roads it's almost 30% of actual in streets. In regular streets its throw is about 30 to 50 meters on high beam. But on roads its jjjeeerooo.
    It is Easy to hate But Love is More Powerful...

  12. #31
    PakWheeler Follow
    ahsan95's Avatar
    Join Date
    Aug 2012
    Location
    Karachi
    Posts
    996
    Follows
    0
    Following
    0
    Mentioned
    46 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by rizwan4340 View Post
    Shukran habibi. Actually my bike result on off side tracks and in streets it's awesome but on black carpeted roads it's almost 30% of actual in streets. In regular streets its throw is about 30 to 50 meters on high beam. But on roads its jjjeeerooo.
    That's because we don't notice light much on roads with street lights and others vehicles lights interfere with our lights output which is why brightness seem to decrease.

    Also, it depends on lights intensity. Higher wattage will result in better output.
    I have installed 35w ballast which is more than enough for me as streets lights also help in visibility.

    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2

  13. #32
    Senior PakWheeler Follow
    JustFarooq's Avatar
    Join Date
    Apr 2006
    Location
    Faisalabad
    Age
    33
    Posts
    1,037
    Follows
    0
    Following
    0
    Mentioned
    29 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    So what about its low and high beam

    What is bi-xenon projectors?
    ALLAH U MMA SALLE ALAA MUHAMMADIN WA BAARIQ WASALLAM

  14. #33
    PakWheeler Follow
    ahsan95's Avatar
    Join Date
    Aug 2012
    Location
    Karachi
    Posts
    996
    Follows
    0
    Following
    0
    Mentioned
    46 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by JustFarooq View Post
    So what about its low and high beam

    What is bi-xenon projectors?
    Nope its single beam projector.

    Bixenon projector is one that has the ability to throw hi and low beam simultaneously.
    Only 1 bulb fits.
    High and low beam works through a solenoid that's already in Bixenon projector.

    The solenoid activates when u switch to high beam. The solenoid then flips the shutter inside the projector out of the way, unleashing completely uncontrolled light.*
    So you won't be getting focused light when high beam is activated.

    I could have gone for morimoto mini h1 Bixenon hid projector but it required some wiring, so I just didn't want to over complicate things and mess with wiring so sticked with single beam.


    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2

  15. #34
    Senior PakWheeler Follow
    JustFarooq's Avatar
    Join Date
    Apr 2006
    Location
    Faisalabad
    Age
    33
    Posts
    1,037
    Follows
    0
    Following
    0
    Mentioned
    29 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by ahsan95 View Post
    Nope its single beam projector.

    Bixenon projector is one that has the ability to throw hi and low beam simultaneously.
    Only 1 bulb fits.
    High and low beam works through a solenoid that's already in Bixenon projector.

    The solenoid activates when u switch to high beam. The solenoid then flips the shutter inside the projector out of the way, unleashing completely uncontrolled light.*
    So you won't be getting focused light when high beam is activated.

    I could have gone for morimoto mini h1 Bixenon hid projector but it required some wiring, so I just didn't want to over complicate things and mess with wiring so sticked with single beam.


    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2
    Oh I c I wanna do a retrofit in my UD100 and it has a dipper switch also like in car so can u tell me the price of morimoto mini price and availability in local market
    And please tell me also the low and high beam process of bi xenon happens sudden or it take no time working like as normal bulb?
    ALLAH U MMA SALLE ALAA MUHAMMADIN WA BAARIQ WASALLAM

  16. #35
    PakWheeler Follow
    ahsan95's Avatar
    Join Date
    Aug 2012
    Location
    Karachi
    Posts
    996
    Follows
    0
    Following
    0
    Mentioned
    46 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by JustFarooq View Post
    Oh I c I wanna do a retrofit in my UD100 and it has a dipper switch also like in car so can u tell me the price of morimoto mini price and availability in local market
    And please tell me also the low and high beam process of bi xenon happens sudden or it take no time working like as normal bulb?
    I am tagging the person who retrofitted my light.
    He will tell u all about pricing and details of projector. @KeiWorks12

    When u switch to high beam, the light will be instantaneous. Since, only the shutter is moved and nothing happens to the bulb.

    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2

  17. #36
    Senior PakWheeler Follow
    JustFarooq's Avatar
    Join Date
    Apr 2006
    Location
    Faisalabad
    Age
    33
    Posts
    1,037
    Follows
    0
    Following
    0
    Mentioned
    29 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    One more question brother ahsan what's the meaning of projector with light modding option?
    ALLAH U MMA SALLE ALAA MUHAMMADIN WA BAARIQ WASALLAM

  18. #37
    PakWheeler Follow
    ahsan95's Avatar
    Join Date
    Aug 2012
    Location
    Karachi
    Posts
    996
    Follows
    0
    Following
    0
    Mentioned
    46 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by JustFarooq View Post
    One more question brother ahsan what's the meaning of projector with light modding option?
    U can call it tuning of projector.
    It is spacing of lens to achieve a blue, crisp sharp cutoff right at the point where there is a step.


    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2

  19. #38
    PakWheeler Follow
    ahsan95's Avatar
    Join Date
    Aug 2012
    Location
    Karachi
    Posts
    996
    Follows
    0
    Following
    0
    Mentioned
    46 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    See 5th pic on 1st page 1st post


    Thought it's bit blurry pic, I'll take a proper pic tomorrow and post it here.
    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2

  20. #39
    PakWheeler Follow
    rizwan4340's Avatar
    Join Date
    Sep 2014
    Age
    26
    Posts
    507
    Follows
    2
    Following
    0
    Mentioned
    6 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by ahsan95 View Post
    See 5th pic on 1st page 1st post


    Thought it's bit blurry pic, I'll take a proper pic tomorrow and post it here.
    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2
    I think it's enough darkness outside for taking some pictures
    It is Easy to hate But Love is More Powerful...

  21. #40
    PakWheeler Follow
    ahsan95's Avatar
    Join Date
    Aug 2012
    Location
    Karachi
    Posts
    996
    Follows
    0
    Following
    0
    Mentioned
    46 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Before and after pics on carpeted road with street lights. Sorry for lil blurry pics.

    Mind that this is just 35w. Imagine the result with 75w
    2nd last pic =devil eye
    Works as parking
    No glare

    Enjoy

    Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2
    Attached Images Attached Images       

+ Reply to Thread
Page 2 of 4 FirstFirst 1234 LastLast

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •