Bro,when i run my car on 100 its normal after that speed there is going to be a very lite vibration and in applying brakes. It slips pl tell me the solution why it slips and viberate
do wheel balancing and alignment..... more over service ur brake disks too.
What is the condition of ur car's tires?
Ok brother front tyres r new back one some old
if you feel the vibration only on brakes then the discs are warped out of shape, Install new ones. You can test which are bent with a dial gauge setup.
Brother i took it to for wheel balancing also but still it vibe rates during brake
its disks. you need to replace these.but can be very old pads too.
It's a corolla .....it's supposed to slip dude...lol
Bro does alignment matter ?
Waleed bro but it slips like mehran gusa on my car
Get your wheels balanced check if any time is not in shape change it
Get its cambers and front n rear alignment
That also thought have to do it should be around 1000-1500 rupees if rims are good
Sent from my GT-I9300 using Tapatalk 2
Very irrelevant reply
I had the same slipping problem while applying brakes on my 2010 rolla. I changed the tires and the problem is gone, the old tires were 2k driven but 2 years used and original euro star. The new tires are also Euro Star from brand new Altis (300 Km driven only). So the reason for slipping in my case was old Euro Stars which get hard after 15 months use.
Point should be noted
and for vibration while brakingget the "brake tawaa's tooled from kharad"......(same as Xulfi bhai said)
Brother i took it for wheel balancing now it work fine no slips but the steering is at left side not balanced what about that how much they charge for alignment?
disc need to be turned or face whatever it pretty common in cuore as well
get ur brake turned or face uneven disc surface makes vibration
How to turned i cant get u