It's a new bike frame cant be cracked yaar
Copy bikes usualy have Vibration issue specialy in mid & High RPM.
why not - have you personally seen the quality control.
i also faced the vibration issue but the axle in the middle lower portion of thr bike was the culprit, new axle cost me 35 and i replaced that in its initial days/mnths,,, i m not talking of wheels axles ,, the centre one ,,
its called swing arm centre bolt and not axle - it should be greased liberally first then tightened with rider weight on the bike so it can settle in its normal position and not be twisted all the time. The greasing helps it rotate and not sieze internally.
The bike only has two axles each of which holds the wheel from the centre.
@asjdsmThank's brother ur a life saver not only i got rid of the vibration issue but the bike is also a lot stable at high speeds.:)))))))
thanks xulfi .. but this the name a mechanic told me when i was to replace it ...
me having similar problem of vibration in my CD70 but i couldn't get which bolt we are talking abt here, is it one which mounts engine to backbone the one on which spring for brake lever is attached also or the one which mounts rear forks ( chimta ) to the backbone? or perhaps a pic might be helpful
the suspect is highlighted,,it cost me 35 rs a year back,, dont know whats its rate now, got from mohamdi autos pindi ,, janyeen honda
^^ thanks bro, it couldn't be any better explained.
Got it for 35 rs frm mohammadi
not only this but it was janyeen honda , fitted in yamha
why it cant be cracked? i m eye witness of quality and technology hero manufacturers using. very first they were importing Chassis, Fuel Tank and etc from china then they got some lahori vendor after that they start to manufacture in Hyderabad by hiring some stupid non experienced engineers. they use soft and low guage metal sheet for chassis and tanks. which cause cracking and bending in Frame on-road. after getting so many complains they just put piece of pipe near Front Fork Stem pipe tube. to avoid bending frame. they r using cheap quality material and technology.