Lubes for Honda City 1.3 MT 2009

[mirzaaaamir]

Dear Frens
I want to complete flush the

1- Gear Oil
2- Clutch Oil
3- Break Oil

Please guide me, which oil should I proceed with and How much quantity would I require for this. Because last owner neither knew much about it nor he changed, I expect.

Need your guidance.

Wassalam

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.

[pwuser149604446944]

Go to authorized dealership they will change all lubrication if needed..and they know exact quantity.. You can read manual book for quantity if you are having.

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.

[mesumjanjua]

I’m using Kixx Pao 5W40 in my 160K driven Honda City. Going best so far.
Put Honda Genuine gear oil, After buying i put ZIC one because i have to keep this car temporarily. And ZIC is going fine ao far.
Go to mechanic and get your brake oil flushed, Put any good quality brake oil available.

[mirzaaaamir]

Thanks a lot. My City is 84k driven. Have not calculated the mileage yet. I expect 16 perhaps on a long. Engine is good. Using 5/30SM engine oil from honda. Honda services charges are at high end. Therefore, I use my mechanic to get these lubes changed. Though I bought original honda from dealership. I was wandering, how much quantity would i required for complete flush ( Gear, Clutch and Break).

Wassalam

[mirzaaaamir]

They expect DOT3, so which DOT3 ?

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.

[mirzaaaamir]

Jazak Allah, Ap sada Jeeain. Point 1 to 6 done already. 9 done, Catcon is OK. Yet to check with 7 (throttle body done) and 8. 10,12 OK.....confused with 11.... i used to maintain 28 Front and 30 PSI back tires. Using Maxxis MA-P3 185/65/15.
A Question.....DOT3 oil is same for Brake and Clutch or different ?

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.

[mirzaaaamir]

Thanks a lot ali bhai, do u know the quantity, means how much quantity is required for gear, clutch and brake fluids??

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.

[mirzaaaamir]

Great, thanks in bundle....be blessed always

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.

[mirzaaaamir]

Sherminda na karen.......ppl like you are great, ppl like me learn a lot. To make us understand/teach without any benefit is noble cause in all aspects. Maula waris ho apka

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.

[mirzaaaamir]

I am in gujrat. Serving in university of gujrat.

[khuram2703]

MA P3 i drove it till 75k and tyres were at 50%.... with just 2 punctures in 2 tyres one each...

But the wheel rotation was done at every 10k kms religiously with Balancing....

After 75k kms i put Maxxis Waltz MS800. Those Old MAP3 were so good in shape that they were adjusted in 6k Rs.

Clutch and Brake fluids are same DOT3