Nissan B13 Restoration

[atta1111]

This post was flagged by the community and is temporarily hidden.

[star2]

engine konsa decide kiya?

g15a

[star2]

what about sr20de or sr25de ??????

I have never seen them in my life that are workable here in Pakistan. I have seen two or so years back two engines, one had wiring loom missing and one had ECU missing also transmission was faulty of both... :). Don't tell me you can provide me with SR20DE

[atta1111]

This post was flagged by the community and is temporarily hidden.

[atta1111]

This post was flagged by the community and is temporarily hidden.

[star2]

lolzzzzzzzzzzzzzzz you are a genious yes I cn provide you with that 14 engine's had arrived you know these are called (aaarooo model) engine by our kabaris so solded very cheaply by one of our partner.guess another thing told yousaf ustaad about it and he also cheked it. so

Well, you are right on time then, go ahead and post up a three views photoshoot of that SR20DE with complete wiring, original ECU and uncut pipes along with engine..... and yes i'll consider that.

[atta1111]

This post was flagged by the community and is temporarily hidden.

[SER_GTR]

@ser_gtr

Please clear one thing more..... there is a fuse plate with which all the wiring is connected, dashboards' engine room's, my question is

can we detach that fuse plate from the N16 body ? and can put that fuse plate with wiring into our B13 instead of making the N16 engine room wiring harness compatible with B13 fuse plate ?

One Way or Other....You Are Making New Connections....Be It N16 Loom Or The Old Connections In That N16 Compatible Fuse Plate.....!! Its On You What Looks Easy..............But Make Sure You Track Down The Right Connections And Install Them On Right Places.......

The Sharing And Routing Of Whole Loom Can Be Different..........! So Make Sure And Confirm Everything Before Wiring It......That Will Be Main Loom Junction You Are Messing With

You Are Talking About That Big Box Located Underneath DASH??????

[SER_GTR]

Well, you are right on time then, go ahead and post up a three views photoshoot of that SR20DE with complete wiring, original ECU and uncut pipes along with engine..... and yes i'll consider that.

Ask Me And I Will Say To Forget SR20DE And Look For SR16VVL NEO

That Thing Works Like VTEC And You Will Be Have Smile All Day LONG Once You Hear It engaging NEO....!!

Unfortunately......That's Rare Find.....!

[SER_GTR]

All These Motors SR20 SR16 Are Wide Angle DOHC Motors..>Meant For Higher End Power .....!!

GA's And Qg Are Narrow Angle Making Low END......!!

There A Difference In Both Of Motors Design Features And Power Output.....!!

SR20DET From Pulsar Is Not Doubt A BLAST From PAST

[IsbCap]

lolzzzzzzzzzzzzzzz you are a genious yes I cn provide you with that 14 engine's had arrived you know these are called (aaarooo model) engine by our kabaris so solded very cheaply by one of our partner.guess another thing told yousaf ustaad about it and he also cheked it. so

What's the expected price tag for SR20DE/SR20DET and SR25DE?

[IsbCap]

It is actually the case with QG15 as well, but you know, you never know :).

Learning from experiences for my next purchase of B13 and immediate swap

And regarding the "spending" issue, well I have not seen an original factory spec B13, which has no issues and a mechanically fit getting sold for 250-300k. Normally, you will get a beaten up engine, or may be you are lucky to find a recently ill-swapped motor in it, suspension to be built or being built recently with cheap parts or kabli shocks and many a times built body parts, and this is not what

I don't expect to see more than 5% of B13's in original factory spec. Yours is certainly gonna be one of them, IA.

so if we have a decently swapped B13 with a working QG18DE in it with all its wiring and DLC connectors and other stuff with the whole project costing 550k including car price, I don't have any problem with it as long as it gives you optimum results :). What u say ?

Roger sir...... lol

[star2]

One Way or Other....You Are Making New Connections....Be It N16 Loom Or The Old Connections In That N16 Compatible Fuse Plate.....!! Its On You What Looks Easy..............But Make Sure You Track Down The Right Connections And Install Them On Right Places.......

The Sharing And Routing Of Whole Loom Can Be Different..........! So Make Sure And Confirm Everything Before Wiring It......That Will Be Main Loom Junction You Are Messing With

You Are Talking About That Big Box Located Underneath DASH??????

Yes Sir I am talking right about that fuse box which is located under the dashboard.......

I had this idea because you might see on the previous page upon looking for wiring looms for B13, I spotted a B13 fuse plate along with it and the dashboard wiring connected to that plate as well, but unfortunately that plate was a bit broken as well as the wiring loom for engine bay was cut near main fuse box, so left that.

What I am assuming here is If I go for dashboard wiring as well, why not I get that fuse plate to start with so that at least when I have engine in my hand, i will have engine wiring + engine bay wiring (with fuse box) + dash board wiring + ECU + TCU + fuse plate with relays ​ of N16 ????

[star2]

With this effort, I think I will have to make connections for my dandi switch out of N16 dash wiring, get the wire out for AC Button, hazad button, meter I will be getting of that N16 so it is already connected, and connect my body wiring harness with that of N16 fuse plate. Am i right ?

[star2]

@ser_gtr
Another question put up is, I am only assuming that besides making connections for the above things for N16 fuse plate, i would only have to provide it 12V power and by purchasing that fuse plate, i will save me hassle of opening the loom for engine bay ?? am i right ???

[star2]

@spectra

Now you see engine very clearly on previous pages, what are your remarks about that ? I am asking because you always complain me that you have not seen the car and yet I am asking questions, so yeah, here I ask question with evidence

[atta1111]

This post was flagged by the community and is temporarily hidden.

[star2]

@star2 here come's another customer welcome janab what did the whole swap of qg-18 cost????

He's not a customer man, he's recently done and swap and a gentleman, so you should help him and post the main wiring diagram, and pinouts for his ECU as he needs to wire that QG15 up in a good way

[IsbCap]

@star2 here come's another customer welcome janab what did the whole swap of qg-18 cost????

Correction, it was QG15. And it hasn't costed me "an arm and leg". I'm expecting SR thingy to be much cheaper in terms of motor price itself, and much much expensive for allied stuff replacement.

[spectra]

@spectra

Now you see engine very clearly on previous pages, what are your remarks about that ? I am asking because you always complain me that you have not seen the car and yet I am asking questions, so yeah, here I ask question with evidence

I was not supportive of your idea of buying a blind date car from karachi if u remember but u dod what u like Now i think there is no question is left for me to answer here. Everything is opened up and needs rework which you have to do. no other option. Be it any engine swap. And please try not to ask me bijli questions, i have told you a million times that i do not any of this stuff. Only have expeiences of swaps and overhauls and thats it. That is my knowledge base. Bijli always frightens me and i try to stay clear of such issues.

And this BTW looks like a yellow cab which came originaly with a CD17 so your fuse box can be from diesel and all the pangas are done when petrol was thrown in. Just my thought about our issue at hand which is scaring you and making you double minded.