Keep em coming Sattar bhai. It's 5am here and I am still awake just to see the new modification in laadli.
I took the frames to a carpenter working in a nearby shop and asked him to taper the outer edges of the frames. He did that using a router machine
Aslamualaikum ... I am fully bent upon keeping my dear friends awake tonight
Tapering the edges of the frames
Going on ...
The carpenter was really a nice person. According to my perception, the frames looked somewhat awkward ... He agreed to cut the outline once again according to the image in my mind
Using sandpaper to smooth out the edges
The nice and kind carpenter once again tapered the edges ... photos follow little later
Roll of fiber glass raw material
It is actually very difficult to cut the fiber glass strands ... they are extremely strong and flexible .... even when he used utility knife, it was more of pulling the strands apart than cutting them
This is the resin which is used to prepare fiber glass. The resin is mixed with hardener ... after which the resin must be consumed within a few minutes, otherwise it hardens and is wasted. It is applied with a brush
A layer of resin was first brushed onto the door trim