Now you can see the final tapered edges of the veneer frames ... it proved to be an intelligent move which later on resulted in a lovely final form
The veneer/ wooden frame is necessary so that screws can be used. It is very difficult to screw into fiber glass surfaces
No idea why I took this photo ... oooops
The fabricator insisted on installing the speaker directly into the base layer ... However, we pushed him to follow OUR PLAN and NOT HIS.
We needed to have spacers under the frame to start work on the top layer of the pods
Careful assessment of size of spacers was crucial, otherwise it would have resulted in problems later
The edges of base plate being cut with a grinder .. FG is very hard and resilient material although very flexible
Madhouse smiling at developing successful DIY success story