Restoration of Corolla 1994 & 7afe Swap

[humayun.chughtai.7]

Nopes ... I think yours is either 1st gen or from any region other than japan.
As per my limited knowledge, 1st gen has no CPS sensor & has adjustable distributor
2nd gen has CPS sensor alongwith non-adjustable dizzy
3rd gen has CPS sensor & coils instead of dizzy & it has obd2 system for diagnosis.

Yours is 1st gen if you have adjustable dizzy & no cps sensor.

[axd.axd7890]

Pic of my engine ..

Is it 1st generation ?

And i think its Malaysian one .... Because computer with this engine is Malaysian one .

[aziz.rehan]

Sir which brand thermostat valve shall be installed in Indus Corolla and what will be it's cost?

[axd.axd7890]

This is the diagnosis clip.
This one is obd or obd2 ?

[Hassan1991]

Looks like 2nd gen.
No that's not obd2 port.

[axd.axd7890]

Kindly share pic of 3rd generation .... 2nd generation intake manifold is not different ( straight one ) ?

[Hassan1991]

Last gen came in e110 corolla.
2nd came in ae101. Look for them.
This manifold actually came in 2nd gen 5afe or first gen 7afe. I have a doubt you have 4afe.

[ahmed_11]

65 is the model number.
It is actually of 40 amperes.
Mentioned below the line “11 plates per cell”

[ahmad.25jadoon]

Humayun bhi kindly share your experience using bison polymax for filling joints.

[ahmad.25jadoon]

bison polymax become hard after dry or work as same as Normal silicon ,?

[humayun.chughtai.7]

Its good.

[humayun.chughtai.7]

It remains soft as well, like other silicones, but its bonding strength is much better than ordinary silicones.

[def3nder]

you can get hazard light functional by adding some relay. I dont remember much but electrician can guide better.

[humayun.chughtai.7]

Update
Fuel avg with A/T ecu came down to 14 kmpl all the way from lucrative figures of 16 to 18 kmpl.

Back in March, I started the hunt for M/T ecu from Shoba Peshawar & succeeded to find one with appropriate part number.

Fuel avg figures are back to normal.

Happy cruising!

[humayun.chughtai.7]

Back in April, I was on the highway cruising around 100 kmph, when a dog came out of nowhere & hit right in the center of front bumper.
I was anticipating a major damage to condenser & radiator, but to my surprise, it was only a broken condenser fan shroud & bumper. Nothing else, Alhamdolillah.

So after a procrastination of 2 months, last week, I removed the bumper, got it repaired. Also did some jugaar with the fan shroud for the time being, as the replacement part wasn't available in my area.

Lagay haatho, I also pressure washed the condenser conveniently as the bumper was not in place.

[humayun.chughtai.7]

Radiator mounts replaced as well.

[aziz.rehan]

Good thing anything dangerous didn't happen.

[humayun.chughtai.7]

Yes Alhamdolillah

[aziz.rehan]

Does ur rpm increase when ac is turned on.

[humayun.chughtai.7]

Yeah ... without AC it remains around 650, with AC it goes up to 850 rpms