@Xulfiqar @smijaz @metalhead @cracked @speedster_101 @margallar @daniyalahmad
Guys i experienced something scary today.
I was cruising at 60kmph when a traffic stop was near. I applied the brakes from a distance as i don't brake hard. The odd part is that the brake pedal seemed to move further in as i pressed it. So i pressed it down at a moment to realize that it was going all the way down to brake. It felt like the brakes failed and i was about to panic when i lifted my foot all the way up and pressed again; the brakes felt much tighter now and the pedal didn't go all the way down. All this happened in a few seconds.
Afterwards i parked the car and shut it off, pressed the brakes a few times and started it with the brakes applied. I did this to check the booster and it worked fine i.e pedal went slightly down. This happened only once in the 10km i drove.
Where is the bleed screw on the disc and drum brake? What will be the procedure of bleeding i.e do i press the pedal, loosen the screw to let air out then tighten it once all air is out and finally release the brake pedal?
I'd appreciate a quick reply as my safety is at great risk.