Do read this..
All participating vehicles as well as service vehicles must pass technical/safety inspection on the following points prior to the Rally.
i. Roll bar is highly recommended for soft top vehicles.
ii. All loose items inside and outside the vehicle must be removed. Any item carried in the vehicle must be bolted or securely fastened.
iii. Snap-on hubcaps, detachable fender skirts, and trim rings must be removed.
iv. Wheels must be safely affixed. They shall not be reversed so that lughole taper does not mate with the chamfer of the lugs. All studs and lug nuts must be present and functional. Wheel spacers are not permitted.
v. Tyres must be in good condition, with no cord or belts showing or cracks in the tread of sidewall.
vi. Seatbelts must be properly installed with attached hardware secure and tight.
vii. Throttle return action shall be safe and positive.
viii. No fuel, oil, water, or brake fluid leaks should be observed when the engine is running.
ix. No cracks shall be permitted in cast or forged wheels.
x. Brakes must have an adequate pedal, sufficient fluid in the master cylinder and no apparent leaks under pressure and must operate on all wheels.
xi. Wheel bearings, shocks, steeling and suspension shall be in good operating condition.
xii. All lights, horn and rearview mirror(s) must be functional.
xiii. Batteries shall be attached securely to the frame or chassis structure in such a way as to ensure that the battery will remain in place.