I got these meter as my rpm meter was of an Auto tranny but upon using I got to know that it was showing incorrect rpm reading and mileage so I changed it back to the Auto tranny one and covered the auto tranny output with a tape
its good, put a LED light in the meter and it would look really good at night
Sure. 1st replace green bulbs with white.
night vision is good.. no need of LED
if u can kindly tell the location/shop from where u purchased!!!
From chah sultan, rawalpindi. And i will go there again to replace it.Becoz it shows miles in odo.If u need this let me know.
U can have it @ 2300
I had the same problem plus the rpm was not correct and the led light is very soothing. I'll share the pics of my car's meter too.
yes but gets better with LED
Didnt get your point.You mean this meter reading is faulty or every rpm meter for pkdm alto???
I am talking specifically about this rpm meter. My cars cuts fuel at 7-8 k rpm but on this meter it was 5.5k plus I thought the mileage was not correct but as you mentioned that it is showing it in miles so that can be the cause.I was thinking that it was not reading the values correctly from the electronic choke, which applies to rpm not sure about mileage.
Hmmm. What u say. Should i return it and get replacement??Its night look is not allowing me to replace
haha I agree with you totally, the night look is amazing plus I love it when the rpm goes woom but I had mine replaced with the old one which only clocks 140km/h but as mine is 660cc so that is not a problem for me Also night look of both is the same just he P D N R stuff annoyed me, I have covered it with a nitto now
@Ek, bro can you get me a picture of some lowering springs for Alto?
Try connecting r" with reverse n" with neutral ...some one did this some where i have seen the images
Sent from my iPhone using PW Forums
how to fix back tow hook in alto vxr?
Bro plz elaborate. Does every rpm meter shows wrong reading in pkdm alto or this only this one (MPH). I am being offered replacement with same shop with meter of automatic gear alto as he dont have manual alto meter. Should I go for replacement of carry on this. suggestion required.
RSR lowering springs usually white in color i have no pic but they have blue rsr written on them and set is around 2k
i have an after market rpm fitted with stock meter and i checked it on cng tune up on computer and there was no error main issue i think will arrise in jdm meters is that k6a is 3cyl engine where f10a is 4 now my after market meter has settings for 4 6 and 8 cyl cars so it gives near accurate reading i have not seen any friend who did swap meter i would like to compre it with their ones and see what results also u can connect R on ur meter with reverse light switch on gear box like when u will engage reverse it will show R on meter