Survey by Qualaroo
+ Reply to Thread
Results 1 to 10 of 10

Thread: Help Re: Vitz Model: 2007

  1. #1
    PakWheeler Follow
    Naveed551's Avatar
    Join Date
    Jul 2009
    Location
    Other
    Age
    42
    Posts
    95
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Question Help Re: Vitz Model: 2007

    Help Re: Vitz Model: 2007

    I just want to know the following Re: Vitz Model 2007 :

    1) The ignition voice is very strange and also high as compare to other cars... Why? Is it only with my car or all Vitz owner's facing the same problem?

    2) Strange Voice of Engine between 0 to 40 speed then all the noises vanished and car run with smooth voice with good pickup. Just want to know the reasons of these voices? Any problem with the petrol or plugs etc.,??

    3) I'm using Super as well as High Octane. What should be the best ratio of these two ?

    4) Can I use only Hi-Octane? May be it will helpful in knocking / pickup and also help in reducing the noises in initial gears?

    5) If I use only Hi-Octane... Is it safe for engine / other parts?

    6) How can I play DVD? to change the Card etc., ? What is the price of Card? The Serial No shown on the player is : NDCN - W5576027

    7) Can I use the Navigation system? How can I see the Maps? What is the Solution?

    8) Currently there are only two speakers in front doors. What is the best way to install two more speaker in the back doors? or I would install them in the car's Trunk ?

    9) Kindly advise me the BEST Plugs for Vitz Model 2007.

    Thanking you with regards.


  2. #2
    PakWheeler Follow
    Naveed551's Avatar
    Join Date
    Jul 2009
    Location
    Other
    Age
    42
    Posts
    95
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Bump !

  3. #3
    PakWheeler Follow
    Naveed551's Avatar
    Join Date
    Jul 2009
    Location
    Other
    Age
    42
    Posts
    95
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Waiting for the reply!!

  4. #4
    Senior PakWheeler Follow
    murtazee's Avatar
    Join Date
    May 2009
    Location
    Lahore
    Age
    38
    Posts
    1,402
    Follows
    0
    Following
    0
    Mentioned
    3 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    naveed plz wait for any Vitz owners/Experts to come and describe their experience and guide u abt the petrol and its effect on engine...
    u better Join Vitz Owner Club and place ur prob there.
    sure someone will come to help u out.
    thanks
    The time you enjoy wasting is not wasted time.

  5. #5
    Senior PakWheeler Follow
    iLLDuDe786's Avatar
    Join Date
    Feb 2009
    Location
    New York City
    Posts
    11,213
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Naveed551 View Post
    Help Re: Vitz Model: 2007

    I just want to know the following Re: Vitz Model 2007 :

    1) The ignition voice is very strange and also high as compare to other cars... Why? Is it only with my car or all Vitz owner's facing the same problem?

    2) Strange Voice of Engine between 0 to 40 speed then all the noises vanished and car run with smooth voice with good pickup. Just want to know the reasons of these voices? Any problem with the petrol or plugs etc.,??

    3) I'm using Super as well as High Octane. What should be the best ratio of these two ?

    4) Can I use only Hi-Octane? May be it will helpful in knocking / pickup and also help in reducing the noises in initial gears?

    5) If I use only Hi-Octane... Is it safe for engine / other parts?

    6) How can I play DVD? to change the Card etc., ? What is the price of Card? The Serial No shown on the player is : NDCN - W5576027

    7) Can I use the Navigation system? How can I see the Maps? What is the Solution?

    8) Currently there are only two speakers in front doors. What is the best way to install two more speaker in the back doors? or I would install them in the car's Trunk ?

    9) Kindly advise me the BEST Plugs for Vitz Model 2007.

    Thanking you with regards.
    1. Facing same issue.
    2. Yes its pretty much normal due to 3 cylinders.
    3. Ratio 75:25 is a good one if the petrol you are getting isn't contaminated.
    4. Yes it will help, but I didnt notice any change when i used 50:50 ratio and then full hi octane 100 ratio. So 50:50 is decent and provides maximum performance.
    5. Yes it is safe, usually HI octane is just 'clean' version of petrol here.
    6. Get a new screen/pre.
    7. No you cannot use the navi sys.
    8. You can either get a enclosure for speakers and put it in the trunk or you can get a custom made rear phatta and fit two speakers in it.
    9. NGK. Not sure about model number.
    -

  6. #6
    PakWheeler Follow
    Naveed551's Avatar
    Join Date
    Jul 2009
    Location
    Other
    Age
    42
    Posts
    95
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Question

    @iLLDuDe786
    Thank you very much for your replies of my all questions one by one.

    Yes Hi-Octane help me very much:

    i) There is no Knocking right now!!

    ii) Strange Voices of Engine between 0-40 is no more there!!

    Illdude - Yaar actually you are not ill in any respect !!!!!!

    Now What will I do for Navigation System?

    Re: speakers I don't want to install any Rear "Phata" so Can I place the speakers in the Trunk? What is the best way to install in the Trunk? Either making two boxes or without boxes?...

  7. #7
    Senior PakWheeler Follow
    iLLDuDe786's Avatar
    Join Date
    Feb 2009
    Location
    New York City
    Posts
    11,213
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    My pleasure.

    Navi system will not work here, you can get any PRE you like from market and get it fitted in the space.

    You can have a simple box placed in the trunk which will have a pair of speakers.
    These boxes are used in Mehrans and Altos, cost only 300rs.
    -

  8. #8
    PakWheeler Follow
    Naveed551's Avatar
    Join Date
    Jul 2009
    Location
    Other
    Age
    42
    Posts
    95
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    @illdude

    One more thing, Kindly also suggest me the Good Speakers. I mean Which Brand ??? and How many watts etc., etc.,

    As you are well aware that the Front Speakers of Vitz are Awesome...
    No match with the local ones...
    Quality of sound / bass all are Superb.

    So kindly suggest me the one which should be very close to the original ones.
    Thanks.

  9. #9
    Senior PakWheeler Follow
    iLLDuDe786's Avatar
    Join Date
    Feb 2009
    Location
    New York City
    Posts
    11,213
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    All speakers are good, it depends if your looking for bass or vocals.
    for bass i would suggest Kenwood 718 350w
    for vocals i would suggest any good Pioneer speaker (you will see quite a few in market) and they range around 300w
    -

  10. #10
    959
    959 is offline
    Senior PakWheeler Follow
    959's Avatar
    Join Date
    Jan 2007
    Location
    Karachi
    Age
    32
    Posts
    3,121
    Follows
    1
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    @Naveed551

    Sir get a Kenwood S703P or Pioneer D1720C front components they are many times ahead the stock round ones, if you cannot afford components, Pioneer D1602R are best, will cost 8K,9K and 6K respectively.

    Do not go for the rear 7 X 10, its useless to cut the panels.

    Your Plugs are NGK LFR6C-11 or Denso IKH20 Iridium are best if you can afford one, 2.7K Rs for a set.

    Use Shell Petrol and your engine and CAT will be fine.

    For HU you have to change the panel and then install an after market DVD or CD player like Pioneer 5250SD or 3250DVD for 13K and 32K Rs respectively.
    Readers are Leaders.

+ Reply to Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •