Survey by Qualaroo
+ Reply to Thread
Results 1 to 17 of 17
Like Tree5Likes
  • 3 Post By capsat
  • 1 Post By argtr65
  • 1 Post By chinyoti

Thread: In Big Trouble with VITZ 2005

  1. #1
    PakWheeler Follow
    asimkh1's Avatar
    Join Date
    May 2010
    Location
    Lahore
    Age
    33
    Posts
    199
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default In Big Trouble with VITZ 2005

    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem

  2. #2
    PakWheeler Follow
    mikmech's Avatar
    Join Date
    Jun 2012
    Location
    Edinburgh
    Posts
    117
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    does your vitz have electronic acceleration pedal

  3. 01-09-2012, 11:34 AM

    Site Banned


  4. #3
    Senior PakWheeler Follow
    capsat's Avatar
    Join Date
    Apr 2006
    Location
    Select City
    Age
    10
    Posts
    12,592
    Follows
    31
    Following
    6
    Mentioned
    1017 Post(s)
    Tagged
    19 Thread(s)
    Problems Posted
    2
    Problems Solved
    5
    Best Answers
    3
    Good Answers
    6

    Default

    you can reset the ECU to defaults - turn key to ACC only, remove the positive terminal of the battery for 3 minutes. re-connect the positive terminal back to battery. turn key to OFF, pull it out, re-insert and start the car, come back to forum with findings.
    - www.crackwheels.com - A skilled Dictator is much more beneficial to Country......than a Democracy of Ignorant people

  5. #4
    Senior PakWheeler Follow
    argtr65's Avatar
    Join Date
    Dec 2008
    Age
    51
    Posts
    1,645
    Follows
    1
    Following
    0
    Mentioned
    74 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Make sure,kick down cable is properly adjusted.
    Never loose hope in life,every step gives u something.

  6. #5
    PakWheeler Follow
    asimkh1's Avatar
    Join Date
    May 2010
    Location
    Lahore
    Age
    33
    Posts
    199
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    I have check the error code and it was p0011, which is for vvt sensor. i just removed it out and clean it with petrol and it was good to go. hence my big problem is solved now.

    But guys i have one more problem, when i start my car after 4-5 hours mean cold start.... the car sounds like tak tak tak but this sound go off after 10 - 15 mins or its too low that i cant hear.

    kindly suggest me what is the possible problem

  7. #6
    Senior PakWheeler Follow
    argtr65's Avatar
    Join Date
    Dec 2008
    Age
    51
    Posts
    1,645
    Follows
    1
    Following
    0
    Mentioned
    74 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    It could be because of low oil pressure or using of wrong grade oil.
    Never loose hope in life,every step gives u something.

  8. #7
    Senior PakWheeler Follow
    Xulfiqar's Avatar
    Join Date
    Aug 2003
    Location
    Other
    Age
    38
    Posts
    24,400
    Follows
    131
    Following
    0
    Mentioned
    3988 Post(s)
    Tagged
    94 Thread(s)
    Problems Posted
    0
    Problems Solved
    4
    Best Answers
    0
    Good Answers
    6

    Default

    clacky startup is caused by a worn out VVT system, just cleaning does not work, you need to replace it with a new part. btw - when you overhauled the engine did you replace all the timing chain guide rails?
    ZRS - Zulfiqar Racing Systems ..... - professionals at work - at crackwheels.com

  9. #8
    Senior PakWheeler Follow
    chinyoti's Avatar
    Join Date
    Sep 2005
    Location
    Karachi
    Age
    27
    Posts
    11,954
    Follows
    5
    Following
    0
    Mentioned
    107 Post(s)
    Tagged
    5 Thread(s)
    Problems Posted
    2
    Problems Solved
    1
    Best Answers
    0
    Good Answers
    1

    Unhappy

    Overhauled a 2005 Vitz , Whats its mileage?
    Get over the fact that Xli lacks power windows, Its an Xli because it lacks thoose features or else it would be a Gli or an Altis if had all the goodies.

  10. #9
    Senior PakWheeler Follow
    drift222's Avatar
    Join Date
    Oct 2011
    Location
    Karachi
    Posts
    2,340
    Follows
    1
    Following
    0
    Mentioned
    211 Post(s)
    Tagged
    5 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by capsat View Post
    you can reset the ECU to defaults - turn key to ACC only, remove the positive terminal of the battery for 3 minutes. re-connect the positive terminal back to battery. turn key to OFF, pull it out, re-insert and start the car, come back to forum with findings.
    Really glad to know that there are people with knowledge to help
    Project GTxx

  11. #10
    PakWheeler Follow
    asimkh1's Avatar
    Join Date
    May 2010
    Location
    Lahore
    Age
    33
    Posts
    199
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Xulfiqar View Post
    clacky startup is caused by a worn out VVT system, just cleaning does not work, you need to replace it with a new part. btw - when you overhauled the engine did you replace all the timing chain guide rails?
    actually bhai my mechanic have same engine in his workshop he just took out the vvt sensor from there and put in my car, after which my problem was solved.

    but for the sound problem (tuk tuk tuk when engine is cold) he is saying to reopen the engine and to check it with kharad for the sizes of every part

    timing chain guide rails were not replaced, plz let me know do i have to change them too

    my car millage is 110000 and it was giving smoke at high rpm.

  12. #11
    Senior PakWheeler Follow
    chinyoti's Avatar
    Join Date
    Sep 2005
    Location
    Karachi
    Age
    27
    Posts
    11,954
    Follows
    5
    Following
    0
    Mentioned
    107 Post(s)
    Tagged
    5 Thread(s)
    Problems Posted
    2
    Problems Solved
    1
    Best Answers
    0
    Good Answers
    1

    Default

    Are you sure it was the engine that needed overhauling? Or could be repaired by changing some seals, I doubt a properly maintained Mehrans engine doesnt dies at 110k kms
    Get over the fact that Xli lacks power windows, Its an Xli because it lacks thoose features or else it would be a Gli or an Altis if had all the goodies.

  13. 05-09-2012, 01:29 PM

    Site Banned


  14. #12
    PakWheeler Follow
    asimkh1's Avatar
    Join Date
    May 2010
    Location
    Lahore
    Age
    33
    Posts
    199
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by chinyoti View Post
    Are you sure it was the engine that needed overhauling? Or could be repaired by changing some seals, I doubt a properly maintained Mehrans engine doesnt dies at 110k kms

    actually my cars rings & valve seal were worn out, and i have personally check the cylinder and piston they are good for more 20 - 30 thousand kilometer .... but i also changed them.... one more thing my meter is showing 110000 but i dont know the actual millage.

    the things changed are:

    3 Pistons (Standard size)
    Piston rings (Standard size)
    valve seals (Standard size)

    the thing which were prepared by kharad

    cylinder sleeves (to get piston of standard size)
    valve grinding for perfect comparison

  15. #13
    PakWheeler Follow
    asimkh1's Avatar
    Join Date
    May 2010
    Location
    Lahore
    Age
    33
    Posts
    199
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Jibran.kamal View Post
    I was also in problem with this problem.. but i solved this problem by reading this article.. click on below link & u will get the article..

    Metro MR-70 For sale in Lahore - Free Classifieds in Pakistan 3 Sep 15:26

    Remember me in ur prayers
    Y u people are misleading & posting irrelevant links ..... try to practice good SEO techniques.

  16. #14
    Senior PakWheeler Follow
    raza1's Avatar
    Join Date
    Nov 2006
    Location
    Karachi
    Posts
    3,206
    Follows
    1
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    2 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    ^^ he is a spammer, remove his post quote from ur post, he will be history soon.


    All are invited in Party tonight at my Signature space.

  17. #15
    Senior PakWheeler Follow
    Xulfiqar's Avatar
    Join Date
    Aug 2003
    Location
    Other
    Age
    38
    Posts
    24,400
    Follows
    131
    Following
    0
    Mentioned
    3988 Post(s)
    Tagged
    94 Thread(s)
    Problems Posted
    0
    Problems Solved
    4
    Best Answers
    0
    Good Answers
    6

    Default

    Quote Originally Posted by asimkh1 View Post
    actually bhai my mechanic have same engine in his workshop he just took out the vvt sensor from there and put in my car, after which my problem was solved.

    but for the sound problem (tuk tuk tuk when engine is cold) he is saying to reopen the engine and to check it with kharad for the sizes of every part

    timing chain guide rails were not replaced, plz let me know do i have to change them too

    my car millage is 110000 and it was giving smoke at high rpm.
    The piston/bore clearance is a little large on these later toyota engines, (you put in new sleeves - real sad), the engine block has siamesed sleeves which are put in as one part then the block is cast around it, If it wears out for any reason oversize pistons are required, once the block goes to its max oversize the block is scrapped.

    The timing chain is measured for wear by measuring how many degrees the cam is off compared to the crank, When that chain is replaced, the guides are also done for their life and replaced along with the tensioner, the cogs are also checked and replaced if they are hook shaped.

    Still 100,000 kms is nothing for a modern day engine, if it was smoking at high revs, you should have done proper diagnosis first, 90% of cases are bad valves/guides/seals. The block is very long lasting if proper oil changes and temperature were maintained.
    ZRS - Zulfiqar Racing Systems ..... - professionals at work - at crackwheels.com

  18. #16
    PakWheeler Follow
    fminhas's Avatar
    Join Date
    Mar 2006
    Location
    Lahore
    Age
    39
    Posts
    172
    Follows
    0
    Following
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    hello are you there man


    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    Quote Originally Posted by asimkh1 View Post
    Dear Experts plz plz plz help me.

    I have overhauled my vitz 2005, 1000cc.

    Now when i started the car first time it was ok.

    The problem is when i start driving the car the RPM goes high even if i don't touch the acceleration pedal the cars goes to 60 km/h & If I put the car on Parking or Neutral the RPM get normal.

    Issue:: RPM goes high when only car is in drive & reverse mode.

    Furthermore the engine light is also came up.

    My mechanic is saying we will reset the ECU with the scanner computer & your problem will be resolved. But i know my mechanic he is just doing hit and try methods. Because he first said that adjustment screw of throttle is not in proper position but no change after adjusting it.

    Experts kindly help me in this matter, also advise a good mechanic who can solve my problem
    /h & If I put the car on Parking or Neutral the RPM get normal.

  19. #17
    PakWheeler Follow
    fminhas's Avatar
    Join Date
    Mar 2006
    Location
    Lahore
    Age
    39
    Posts
    172
    Follows
    0
    Following
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Vitz is a nice car. I like it

+ Reply to Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •