Aoa guys, finally i've started my first ever considerable project and would like to share it with u guys for some tips and response. i had been thinking about doing this since 2013 and finally we have started this thanks to Allah almighty.
The basic plan is to make this car a track monster with some looks.
My ride is a 2003 Honda civic vti oriel, its with me since 2003 and we have tried various experiments on this ride. some would say we had riced it, abused it but still somehow it has managed to survive. in 2012 we swapped the engine with a d17 and did i/h/e with some extra goodies, then my dad wanted to sale this but failed and now finally we are building it up. For start i would be facelifting the car to a 2005 and swap the d17 with a h22 allmotor. rest pics will be uploaded as we progress.
some old pictures for starters
Exterior:
2005 facelift
Hids
amber fogs
smoked lights with Drls
red honda emblems
no plate tilter
window visors
new rims
lug nuts
brake callipers
roof wrap
rear spoiler
new tail lights
brake light
rear tow hook
bumper clips
hood spacers
bumper clips
Engine and suspension:
h22 type s i/h/e (i've been told its allstock thnx to @immad100 )
coilovers
EPS
new tyres
Interior
new steering wheel
quick release
short shifter
engine bay paint and semi tuck wiring
Thats pretty much i remember now, might be missing a few things, would be sharing it as i progress
do say MASHALLAH, cheers
latest pics :
the project took a little turn and now i have decided to turn this project to an h22 allmotor semi drag car. the setup would be now as follows:
BLOCK:
h22 89* 90.7mm
WISECO custom forged 13 cr pistons (final compression around 13.5 due to shaving)
EAGLE H beam rods
COMETIC head gasket
ACL thrust washers
ACL race rod bearings
ACL race main bearings
ARP main stud kit
ARP head stud kit
KS TUNED oil pump with balance shaft eliminator kit installed
ks tuned timing belt
ATI race super damper crank pulley
Darton Mid sleeves
HEAD:
Skunk 2 Pro 2 cams
skunk 2 spring base kit
skunk 2 titanium retainers
skunk 2 pro valve springs
Skunk2 pro adjustable cam gears
Ferrea competition plus valves
ferrea valve guides
Ferrea valve seals
skunk 2 pro billet 70 mm throttle body
ks tuned h22v2 timing tensioner
ks tuned walk blocker
ks tuned cam plug
ks tuned spark plug cover
ks tuned cam trigger kit
blackworks magnetic drain plugset
INDUCTION
H22 fully gutted intake manifold, port matched to 70mm TB and 3. inch intake pipe to a 4 inch velocity stack
EXHAUST
sheepey built pro stock hood exit
FUELING
Aem 265 lph fuel pump
Aem fpr
Aem fuel filter
Grams 550 c injector kit
Aem high volume fuel rail
aeromotive 100psi fuel pressure guage
AEM water methanol flow guage kit
AEM water mathanol injection kit
-6an braided return fuel line
-8an braided feed fuel line
SHIFTING
skunk 2 short throw shifter
mugen gear knob
ELECTRICAL
custom engine and dash wiring
race spec switch panel
COOLING
TOMEI half size radiator
blackworks racing fan
Mishimoto silicon radiator hose kit
SUSPENSION
CUSCO sports zero 3s coilovers
beaks rear control arms
beaks subframe
beaks tie bar
custom front and back strut bars
Front and back camber kit
Custom aluminum mounts
TRANSMISSION
t2t4 lsd tranny
GEAR X 4.64 FD
M factory closed ratio 3rd 4th 5th
Race Axles
CC super single clutch kit
CC ultra light weight flywheel
TYRES AND RIMS
Currently on MT 205/55/15
MH 23/8/13 slicks
MH 24/3.6/15 skinnies
Weld 13*10 black wheels
Weld 15*3.5 skinnies
WEIGHT REDUCTION
Cut doors
Cut hood
Cut trunk
rear seats removed
bride racing seats
AC removed
PS removed
No exhaust piping
No useless wiring
Small fuel tank
No Fat people (cz race car)
Safety:
4 point harness
Engine management
Hondata s300 v3
AEM EGT gauge
AEM fuel pressure gauge
AEM OIL pressure gauge
AEM fuel pressure Gauge
AEM oil temperature Gauge
AEM water temperature Gauge
AEM x series wideband UEGO
AEM Water meth flow guage
NITROUS
Nitrous express 4 cyl efi direct port kit
50,60,75,100,125,150,160 jets
Nitrous express electric remote pressure gauge
Nitrous express 4an purge valve system
Nitrous express gen x2 bottle heater
nitrous express automatic remote bottle opener
Nitrous express maximizer 4 progressive controller
nitrous express billet bracket
might be missing a few stuff or would change some minor things in the future which would all be posted here from time to time.