no it dosen't hv .. that's why it took so much time and hard work ... 3M ones are very easy to apply ...i don't exactly remember price of per sq. ft. as i bought it months ago but i bought the sheet for 250 rs. which covered the whole helmet easily ...
ok 1st thing is don't try to wrap it in one piece and also get a good hair dryer to heat the vinyl for stretching ... after trial and error, i wrap it in three pieces as follows ..
- cover the top area of helmet while heating and stretching it on the round places ... its the hardest part and will take quite a time ... a relaxing environment is recommended
- now cover the back part which is slightly easy as its normally flat most of the time ...
- now cover the lower front which is fairly easy ...
during wrapping don't cut the leftover vinyl ..cut them in the last for good finishing accordingly ...