Asalam Alaikum Dear Fellow Members.
So this all started when I saw some pictures of @Bilalicious on another thread and I asked him what should I should I do to have road vision like you and he suggested me Morimoto Mini H1s 6.0. So started to find the stuff I donot have any friends or relative abroad so first off all I asked @mithu whom I thought is the @MominHaqq (i remember your words bro "Oh come on dude are you high or something:P) then he showed me way. He gave me the contact number of Ibad Shafi a.k.a @KeiWorks12 and said he is the guru here you should consult him. Special thanks to @KeiWorks12 He gave me the stuff for really very fair price and guided me all along the way and really very thankfull to him if you have any questions regarding Lighting setups he will help you out. Special thanks to my little brother yasir soomro who was like chottu to me (oye 10number wala paana pharayeen yawr) and my father for letting me touch and open the stock lights:P
So here comes the Products.1. Morimoto Mini H1 6.0 Bixenon Projectors2. CNlight 4300k 35w Bulbs3. Appollo 3.0 Shrouds4. Centric Rings5. Denso 35w ballasts.
So lets start with the retrofit.first of all remove the lights from the car and bring it home. ( I got a mechanic to remove the bumper and then lights)
remove any bolts you seeremove any grips and screws you see
now for opening the sealed lens you can user oven heatgun or hairdryer I went for Hairdryer technique find a box big enough to fit the light make a whole of the size hairdryer put it through the hole and turn it on and leave 15mins.using a screw driver try to pryoff of the lensremove the reflector bowl and fit fit the projector so you can fit and see if shroud need any cutting or not (mine didnt need)Move on to coloring (this is optional step). I tried to find plasti dip because it can peeled off you dont like the color but instead I found Armorall Custom shield from Metro Karachi
Pictures not visible sir.
check em out now
Aala!Subscribed.
Check if shroud fits or notso move on to coloringand here is the resultmoving on to the aligment before resealing the lensthis is before the alignmentafter the height and rotation alignmentand the final Result after sealing the lamps and fitting them on the carLow BeamHigh Beam
will post some videos and pictures while driving tommorow Inshallah.
Low BeamHigh Beam
How did you re-seal the lense?
Reheating the Oem Sealant
Very nice .. awesome cutoff .. very professional..Do these projector have high low beam in one lense? what have u done with the high beam portion in headlight
It was truly a pleasure dealing with you sir . ThanksThe lights look awesome
Awsome work done brother. Perfectly fine cutoo too. Can you please forward me the number keiworks as i need to install them too in my corolla. waiting for your response. Once again awsome work done..Truly love the cutt off
Great job man... I ve seen that its the ballasts that make the difference for a good lighting system... Denso is awesome...
Cheers...
Yeah these are bixenons they work as high and low both. And I am using the same stock high beam halogen reflector bulb in high beam
Thanks bro.
I have pmed you.
Yeah you are right. Ballast is the major thing here
@maddriverI need guidance about this project. Can you please tell me how you alligned the projectors and what cutting tool you used to cutt the reflectors for fitting projectors?? I need to get this project done on a separate seats of headlights. Doent want to play around with the orignal ones. What you say
Bro i aligned the projector by putting the by putting the headlight where they are installed screwed them and by hand tilted them to desired cutoff then adjust the height by height adjuster from back of the headlight. I didnt need any cutting you donot need any cutting with Mini H1s although in some cases shroud may need cutting but mine fit very good without cutting so after putting the shrouds i used silicon glue. Thats the best idea of you want to put them on another set of lights. You wont have any risk then. If something needs cutting dramal tool is used
And what do you think about the looks guys?
very nice..do share the cost of the project...
Are they adjustable? Are they motorized?
They arent motorized
Did u opt for gattling canon upgrade too?The cut off looks way better than 9th gen civic