Wrd vitz ncp91

Tags: #<Tag:0x007fc0cc5fb010>

wasay_ahmed (wasay_ahmed) 2013-03-02 17:31:06 +0500 #1

Pls say MashaAllah.As salam Alaikum Alhumdulilah bought this 07 model fresh import vitz in January 2013.Though sold mine old Vitz its 4grade ncp91 1500cc autogear vitz

wasay_ahmed (wasay_ahmed) 2013-03-02 17:42:19 +0500 #2

due to lack age of time couldn't perform much of the Diys myself unfortunately though got its fuel filter transmission oil coolant changed along wth air filter n oil filter change. Now coming to few DIYs cleaned OCV and swaped plugs sorry for incomplete pictures

wasay_ahmed (wasay_ahmed) 2013-03-02 17:50:18 +0500 #3

Installed voltage stabliser and Failed attempt of Intake installation :s applied reducer for retro fit in oem pipe still failed :S as after all done car didn't cranked just a little start n shut off. Also bought Vafc2 now looking for wideband.Looking for wideband,Boltonn intake kit shortram for this model n any idea how to wire VAFC IN THIS ENGINE

Waqar. (Waqar.) 2013-03-02 17:50:34 +0500 #4

congratulations on the purchase! 1500cc must be quick

Docjunaid (Docjunaid) 2013-03-02 18:21:29 +0500 #5

Congrats
Beautiful Beast MasaAllah

jz (jz) 2013-03-03 05:47:43 +0500 #6

another nice car enters our group mashAllah
congrats on the new ride wassay,drive safe buddy.

SER_GTR (SER_GTR) 2013-03-03 05:57:34 +0500 #7

I Miss To Check That Car While Its In Karachi.....Looks Great..!

If MAF Denies To Accept The Changes....Better Leave It Stock....!!

For VAFC2.......Just Check It Supports MAF Or Just MAP????? check in Sensor Setting There's

Get Pin out For This ECU 1st And Its Easy To Wire it Then...!

speed_manan (speed_manan) 2013-03-04 02:11:36 +0500 #8

MashAllah Congratulation Wasay Bhai Drive safe

wasay_ahmed (wasay_ahmed) 2013-03-10 08:43:15 +0500 #9

Stabliser Installation

wasay_ahmed (wasay_ahmed) 2013-03-17 11:18:13 +0500 #10

Made Short Ram intake out of Stock Filter box.Thanks to Hamza Bilal for finding 1 Filter box.

Cutting requires alot of patience n time indeed.

MAXTORQUE (MAXTORQUE) 2013-05-19 11:29:35 +0500 #11

impressive fitting of Air intake

argus (argus) 2013-05-19 18:48:02 +0500 #12

Mashallah

jagger (jagger) 2013-05-25 02:16:37 +0500 #13

Mashallah Clean ride... isnt that setup suppose to suck hot air from that position???

wasay_ahmed (wasay_ahmed) 2013-05-26 06:53:15 +0500 #14

Well not tht much since stock pipe is also nearby.yet its the only option for daily driver car.Long ram can ruien ones life in rain

AmmarSaleem (AmmarSaleem) 2013-05-26 16:11:56 +0500 #15

nice work man a heat sheild will take the hot air issue away n give u one more diy!!!

wasay_ahmed (wasay_ahmed) 2013-05-27 17:55:26 +0500 #16

heat sheild have small filter will sufocate

wasay_ahmed (wasay_ahmed) 2013-06-23 17:08:52 +0500 #17

Today Replaced Thermostat Valve.OE one was rated at 88degree whereas the new one is rated at 82degree though it will operate on lower temperature. Also changed thee coolant n used GS Oil coolant.
Changed Air Filter n cleaned the Air Flow Sensor bulb which was a bit foggy.

The car is running lighter n more reponsive but ideling is some how a bit unstable.Drops to 500 sumtimes :S
Looks like have to open the ISCV next week:'(

CoLd_FuSiOn (CoLd_FuSiOn) 2013-06-23 18:16:14 +0500 #18

The engine needs to operate at an optimal temperature so that it yields best performance and mileage use the factory recommended thermostat or your engine won't operate at the optimum temperature this should solve your idling too.

Sent from my GT-I9100 using Tapatalk 2

wasay_ahmed (wasay_ahmed) 2013-06-24 22:26:42 +0500 #19

@cold fusion
Jazak Allah Khair
unable to find 1 wth OEM part no n 88degree reinstalled the genuine1 lets hope i dont have to ISCV now :-S

wasay_ahmed (wasay_ahmed) 2013-06-25 15:04:15 +0500 #20

u made my day phajee reinstalled the oem 1 after cleaning and MashaAllah its all good