Hi,
I got this image from this forum but i want to know where these 3 pipes go.
Thanks
@margallar
@syncview
can't find my answer, please can you check your carburetor for these 3 pipes and post images for them.
the red arrow is for the distributor vacuum advance
green arrow is IIRC for the EGR equipped G13ba engine, on yours block it off.
the blue arrow is nothingthe hole between the blue arrow and the coolant input pipe is for the idle mixture screw.
@syncviewYou are Hafiz of Margalla technology. [emoji106]🏼[emoji106]🏼[emoji106]🏼
Thanks, you are very helpful , this pipe know is go to TVSV with other pipe coming from gas filter so should i disconnect it and leave it without connection as i am confused why the manufacturer didn't close it if it will be useless, i attached an image from SF310 manual which show that the green arrow go to canister ( my car come without canister ) and the blue arrow go for TVSV.
Man you are genius
Can you tell me what i have to do to the pipe with the green arrow? should i leave it without connection as for the moment it is connected to TVSV.
Which TVSV? What the does the TVSV actuate?Can you share a picture?
Do you have an engine with emissions equipment?
I do not have an engine with emissions equipment, here is some picture for the TVSV ( Thermal vacuum switching valve ), the real photos from Cultus forum, the scanned picture from SF310 manual.
This tvsv, the input closer to the hex nut goes to the vacuum connection on the manifold
The other goes to the choke cam opener diaphragm
Sent from my VS980 4G using Tapatalk
Block the pipe green arrowBlue arrow on your carb should already be blocked
Green and blue arrow already open like the picture in my first post, i will try to block them but i do not know why the manufacturer leave them open.
Blue arrow goes no where on your car
Yes, blue arrow goes no where but it is open like the picture.
I meant to say, that its blocked from the 'inside' - don't worry about it.
Thanks, so i will block the green arrow only.
aoa I have margala98 I have problem with carb. on idle it goes off could zulfiqar '''the car guy''' can explain it what to do
@zainmahdi @babarhyd bump