Axio G 2007 CVT issue or normal?

[HulkPayne]

Salaam friends. I have corolla axio 2007 model and recently I had it's valve body changed because of noisy gearbox. The noise is gone but i noticed that everytime I slowly accelerate from parked, at about 15km/h the car slightly jerks or feels like a slight push from behind. After the initial jerk the car drives smoothly . I brought this in the mechanic's notice and he replied that it's normal and all axios do it.
Now, since I dont have access to other axios, i wanted to request those guys with axio to kindly check their car that whether it has the same jerk or not so that I can know for sure. It would be much appreciated. Thank you.

[Xulfiqar]

recalibrate the G sensor and the fuel pressure from techstream - this time make sure no one is sitting in the car and that its sitting perfectly level.

[Titanium]

https://www.pakwheels.com/forums/wheels-fan-clubs/207925-fan-club-toyota-corolla-axio

Post here and you may get a better response

[Khurram26]

Salaam friends. I have corolla axio 2007 model and recently I had it's valve body changed because of noisy gearbox. The noise is gone but i noticed that everytime I slowly accelerate from parked, at about 15km/h the car slightly jerks or feels like a slight push from behind. After the initial jerk the car drives smoothly . I brought this in the mechanic's notice and he replied that it's normal and all axios do it.
Now, since I dont have access to other axios, i wanted to request those guys with axio to kindly check their car that whether it has the same jerk or not so that I can know for sure. It would be much appreciated. Thank you.

I have an axio for the last two years. During this period, I have noticed the jerk which you mentioned, but it is not consistent. Sometimes it jerks at very low speed sometimes it doesn't. So nothing to worry about.

Sent from my SM-N900 using PW Forums mobile app

[Xulfiqar]

speaking of similar fault in Nissan's - the torque mount (if worn) will cause this and so will a wrong acceleration sensor input. In some cases an update was required which causes higher slip at low rpm to smooth it out.