Hi All
As mentioned in the title i am selling a brand new intake manifold heatshield gasket for Honda B16/B18C series engines
Tegiwa imports PTFE heatshield gasket for Honda B series engines (similar to hondata) Demand 6000
Contact 03335300593 SMS preferred
Please don't PM as do not check these
NEW Unopened! This is more useful than intakes that ppl put in their cars especially in Pakistani climate you will get lower IATs and more power
actual picture
Description
TEGIWA Thermal Gasket. This gasket helps reduce intake air temps by removing the direct connection of the intake manifold to the cylinder head. By placing this thermal shield between the intake manifold and the cylinder head, you will help reduce the amount of heat soak the intake manifold normally absorbs from the cylinder head resulting in an increase in power. Made from PTFE - the ultimate thermo-plastic and manufactured in the UK using the latest water-cutting technology.
Note: Also suitable in combination with a compressor. This gasket will prevent heat coming from the compressor reaching the cylinder head
Hondata quality for a better price!
From Hondata
The graph shows the results of installing the Heatshield gasket and bypassing the throttle body heating and idle control valve heating. Further temperature drops are possible when in addition the interior heating hose is blocked. What the graph shows, is that as you open the throttle, the intake temperature drops slowly as it cools the intake. When you descend a hill with the throttle closed or drive around town on a light throttle the temperature climbs quickly. It takes a good 15-20 seconds for the temperature to drop again when you open the throttle. So if you start your 1/4 mile drag with a hot intake manifold - you are only starting to develop maximum power near the end of the run when the intake has been cooled. The Heatshield gasket kit gives you 4-5% more power immediately by lowering the intake
temperature.
Graph